CHAPTER 4 CONTROL PANEL

The following settings can be made in this mode:

Display Message

Page Format Mode

 

 

 

PAPER=LETTER

Set cut sheet paper size to letter, A4, legal,

 

 

B5, A5 or executive, or envelope size to JIS

 

 

B5, COM10, C5, or DL.

LEFT M= 0C P

Set the left margin at column 0-126 at

 

 

10cpi.

RIGHT M = 80C P

Set the right margin at column 10-136 at

 

 

10cpi. See “List of Factory Settings” in this

 

 

chapter.

TOP M=0.5" P

Set the top margin at a distance from the top

 

 

edge of the paper: 0, 0.33 (Non-HP), 0.5

 

 

(HP), 1.0, 1.5, or 2.0 inches.

BOTTOM M=0.5" P

Set the bottom margin at a distance from the

 

 

bottom edge of the paper: 0, 0.33 (Non-

 

 

HP), 0.5 (HP), 1.0, 1.5, or 2.0 inches.

LINES= 60L P

Set the number of lines per page from 5 to

 

 

128 lines. See “List of Factory Settings” in

 

 

this chapter.

The letter “P” in the display messages indicates that the page orientation is portrait. The letter “L” is displayed when it is landscape.

Display Message

 

Page Format Mode (Continued)

X OFFSET=

0

Move the print start position (at the upper left corner on pages)

 

 

horizontally up to -500 dots to the left or +500 dots to the right

 

 

in 300dpi dot unit increments: factory setting = 0.

 

 

 

Y OFFSET=

0

Move the print start position (at the upper left corner on pages)

 

 

vertically up to -500 dots downward or +500 dots upward in

 

 

300dpi dot increments: factory setting = 0.

4–25