Brother HL-3400CN MODE Button Settings in HP-GLMode, Mode button in the HP-GLmode, The following table shows all the selections you can choose with the

CHAPTER 4 CONTROL PANEL

MODE Button Settings in HP-GL Mode

The following table shows all the selections you can choose with the

Mode button in the HP-GL mode.

✒Note

The mode menus and settings that appear will vary according to the current emulation mode, printer status and any options that may be installed in the printer.

Mode Menu	Setting Menu	Sub-Setting Menu		Setting
INTERFACE MODE
Same as PCL5C Mode
FORMAT MODE	PAGE FORMAT MODE		Same as BR=Scipt mode
	GRAPHICS MODE		PEN SETTING

				SETTING=PEN1	PEN1 to 6
					(Set size and gray
					percentage for the selected
					pen )
				SIZE #=3 dots	1 to 10 dots (pen size in
					dots)
					(# is the selected pen
					number )
				GRAY #=100%	15, 30, 45, 75, 90, or 100%
					(# is the selected pen
					number )
				exit	Exit to SETTING=PEN1–6
		exit			Exit to GRAPHICS MODE
		CHARACTER SET
			STANDARD SET		Standard character set
				ANSI ASCII	See character sets in
					Appendix
			ALTERNATE SET		Alternate character set
				ANSI ASCII	See character sets in
					Appendix.
			exit		Exit to GRAPHICS MODE
	exit				Exit to FORMAT MODE
RESOLUTION MODE	RESOLUTION	RESOLUTION=600			300 or 600 dpi
	HRC SETTING	HRC=MEDIUM			OFF, LIGHT, MEDIUM, or
					DARK
	exit				Exit to RESOLUTION MODE

4–15