CHAPTER 5 MAINTENANCE

Lock Lever

Transfer Roller

Shaft

Spring

4.Lock the Transfer Roller with the Transfer Roller Lock Lever.

5.Close the Rear Access Cover.

6.Plug the power cord into the power outlet and press the Power button to turn on the printer.

✒Note

∙User replacement of some of these parts by is not recommended.

∙For replacement of the Paper Feeding Roller, Separator Pad and the Transfer Drum, consult your local dealer/retailer.

∙Actions 7 to 10 should only be carried out by your dealer or Brother authorized service center when they have replaced the Paper Feeding Roller, Separator Pad and the Transfer Drum.

∙Replacement of only the Transfer Roller is not a full 240K service and the counter should not be reset until these additional parts are replaced.

7. Press the Sel button to take the printer Off Line.

8. Press the Reset button while holding down the Shift button.

9.When you see “RESET PRINTER” on the LCD panel, press the ▲ (UP) or ▼ (DOWN) button and select “RESET PARTS LIFE”. Press the Set button and select “240K KIT” with the ▲ (UP) or ▼ (DOWN) button.

10. Press the Set button, the printer is now On Line.

5-29