SETUP SEND 3 - 9
Real Time Transmission
When you are sending a fax, the MFC will scan the documents into
the memory before sending. Then, as soon as the phone line is free,
the MFC will start dialing and sending.
If the memory becomes full, the MFC will send the document in real
time (even if Real Time TX is set to Off).
Sometimes, you may want to send an important document
immediately, without wa iting for memory transmission . You can set
Real Time TX to On for all documen ts or for the next fax only.
If you want to fax multiple pages from the scanner glass, Real Time
Transmission should be set to Off.
1
If it is not illuminated i n green, press (Fax).
2
Load your document.
3
For MFC-210C,
press Menu/Set, 2, 2, 3.
—OR—
For MFC-420CN,
press Menu/Set, 2, 2, 5.
4
To change the default setting, press ▲ or ▼ to select On (or Off).
Press Menu/Set.
—OR—
For the next fax transmission only, press ▲ or ▼ to select Next
Fax Only.
Press Menu/Set.
5
Press ▲ or ▼ to select On (or Off).
Press Menu/Set.
In Real Time Transmission , the redial feature does not work.
If you are sending a color Fax, the MFC will send it in real time
(even if Real Time TX is set to Off).
Setup Send
5.Real Time TX