3 - 12 SETUP SEND
Overseas Mode
If you are having difficulty sending a fax overseas due to possibl e
interference on the phon e line, we recommend that you turn on t he
Overseas Mode. After you send a fax using th is feature, the feature
will turn itself off.
1
If it is not illuminated in green, press (Fax).
2
Load your document.
3
For MFC-210C,
press Menu/Set, 2, 2, 4.
For MFC-420CN,
press Menu/Set, 2, 2, 7.
4
Press ▲ or ▼ to select On (or Off).
Press Menu/Set.
■If you did not use up any of the numbers for Groups, a ccess
codes or credit card numbers, you can ‘broadcast’ faxes to
as many as 70 (MFC-210C) or 130 (M FC-420CN) different
numbers.
■The available memory will vary depending on the types of
jobs in the memory and the number of locations used for
broadcasting. If you broadc ast to the maximum numbers
available, you will not be able to use Dual Access and
Delayed fax (MFC-420CN only).
■Enter the long dialing sequen ce numbers as you would
normally, but remember that each Speed-Dial number
counts as one number, so the nu mber of locations you can
store becomes limited.
■If the memory is full, press Stop/Exit to stop the job or if
more than one page has been scanned, press Black Start
to send the portion that is in the memory.
Setup Send
7.Overseas Mode