Chapter 3
h Press Black Start.
Faxing from the ADF
The machine starts scanning and sending the document.
Faxing from the scanner glass
When the screen asks you
Next Page?, do one of the following:
To send a single page, press
No (Send) (or press Black Start again).
The machine starts sending the document.
To send more than one page, press Yes and place the next page on the scanner glass.
Press OK.
The machine starts scanning the page. (Repeat this step for each additional page.)
Note
•If you did not use up any of the numbers for Groups, you can broadcast faxes to as many as 40
200
•The machine’s available memory will vary depending on the types of jobs in the memory and the number of locations used for broadcasting. If you broadcast to the maximum number available, you will not be able to use dual access and delayed fax.
•If the Out of Memory message appears, press Stop/Exit to stop the job. If more than one page has been scanned, press Black Start to send the portion that is in the machine’s memory.
a Press Stop/Exit.
b Do one of the following:
To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
To cancel the current job, press the button that displays the number being dialed. Go to step d.
To exit without canceling, press Stop/Exit.
c When the screen asks if you want to cancel the entire broadcast, do one of the following:
Press Yes to confirm.
To exit without canceling, press No or Stop/Exit.
d Do one of the following:
To cancel the current job, press Yes.
To exit without canceling, press No or Stop/Exit.
Real Time TransmissionWhen you are sending a fax, the machine will scan the document into the memory before sending it. Then, as soon as the telephone line is free, the machine will start dialing and sending.
Sometimes, you may want to send an important document immediately, without waiting for memory transmission. You can do this by turning on Real Time TX.
a Press 
(FAX).
b c
d Press s or t to display Real Time TX.
12