
PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
Restoring all settings to the factory settings
You can restore the PhotoCapture settings that you have changed, to the factory settings, such as Print Quality, Paper Type, Paper Size, Brightness, Contrast, True2Life, Cropping, Borderless and Print Date.
a Press (PHOTO). Do one of the following:
Press View Photos and press
s or t to display each photo. When the photo you want is displayed, press OK.
Press Print All.
b Press Options.
c Press s or t to display
Factory Reset.
d Press Factory Reset. e Press Yes to confirm. f Press Stop/Exit.
Scan to a memory card or USB Flash memory drive
How to set a new defaultYou can save the Scan to Media settings (Quality and File Type) you use most often by setting them as the default settings. These settings will stay until you change them again.
a Press (SCAN). b Press s or t to display
Scan to Media.
c
d8
e Press Quality or File Type. Then press the option you want.
Repeat this step for each setting you want to change.
f After you are finished choosing your preferred settings, press
Set New Default.
g Press OK.
The screen asks you again to confirm
the change as the new default.
Press Yes.
h Press Stop/Exit.
53