
Chapter 7
Enlarging or reducing the copied imageYou can choose an enlargement or reduction ratio. If you choose Fit to Page, your machine will adjust the size automatically to the paper size you set.
a Press (COPY). b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Enlarge/Reduce.
e Press d or c to choose 100%, Enlarge, Reduce, Fit to Page or
f Do one of the following:
If you chose Enlarge or Reduce, press OK and press d or c to choose the enlargement or reduction ratio you want.
Press OK.
If you chose
25% to 400%. Press OK.
If you chose 100% or Fit to Page, go to step g.
198% 4"x6"iA4
186% 4"x6"iLTR
130% LTRiLGR
104% EXEiLTR
100%
97% LTRiA4
93% A4iLTR
85% LTRiEXE
83% LGLiA4
78% LGLiLTR
64% LGRiLTR
46% LTRi4"x6"
Fit to Page
g If you do not want to change additional settings, press Black Start or
Color Start.
Note
•Page Layout is not available with
Enlarge/Reduce.
•Page Layout, Book Copy, Sort, Thin Paper Copy and
Watermark Copy are not available with
Fit to Page.
•Fit to Page does not work properly when the document on the scanner glass is skewed more than 3 degrees. Using the document guidelines on the left and top, place your document in the upper left hand corner, with the document face down on the scanner glass.
•Fit to Page is not available for a Legal size document.
•When using Ledger or A3 size paper, Duplex Copy is not available with
Enlarge/Reduce.
40