Chapter 8

IMPORTANT

DO NOT take out the memory card or USB Flash memory drive while PHOTO CAPTURE is blinking to avoid damaging the card, USB Flash memory drive or the data stored on them.

How to set a new default

You can save the Scan to Media settings

(Quality, File Type, Glass ScanSize and Auto Crop) you use most often by setting them as the default settings. These settings will stay until you change them again.

a Press (SCAN).

b Press a or b to choose Scan to Media. Press OK.

c Press a or b to choose

Set New Default. Press OK and 1 to choose Yes.

d Press Stop/Exit.

How to reset to the factory settings

You can restore all the Scan to Media settings (Quality, File Type, Glass ScanSize and Auto Crop), that you have changed, to the factory settings.

a Press (SCAN).

b Press a or b to choose Scan to Media. Press OK.

c Press a or b to choose

Factory Reset. Press OK and 1 to choose Yes.

d Press Stop/Exit.

64