Brother MFC-J6510DW, MFC-J6710DW 55

Enter the number of copies you want.

j

k Press Black Start or Color Start.

If you placed the document in the ADF, the machine scans the pages and starts printing.

If you are using the scanner glass, go to step l.

l Do one of the following:

Place the next page on the scanner glass.

Press 1. Go to step m.

After all the pages have been scanned, press 2.

m Press OK.

The machine starts scanning and printing the page.

DO NOT touch the printed page until it is ejected the second time. The machine will print the first side and eject the paper and then pull the paper in to print the second side.

Note

•If you get a paper jam, press a or b to choose Advanced and then press OK after step e, and then press one of the jam prevention settings: DX1 or DX2.

DX1 uses a longer print time for the ink to dry.

DX2 uses a longer print time and will also print in lighter colors.

•DX1 is not available for Ledger or A3 size paper.

Making copies

Setting your changes as the new default

You can save the copy settings for Quality, Tray Select (MFC-J6710DW), Enlarge/Reduce, Density,

Page Layout, Skew Adjustment,

Ink Save Mode, Thin Paper Copy and Duplex Copy that you use most often by setting them as the default settings. These settings will stay until you change them again.

a Press (COPY).

b Press a or b and d or c to choose your
new setting.
Press OK.
Repeat this step for each setting you
want to change.	7
	7

c After changing the last setting, press

aor b to choose Set New Default. Press OK.

d Press 1 to choose Yes. e Press Stop/Exit.

Restoring all settings to the factory settings

You can restore the copy settings

Quality, Tray Select (MFC-J6710DW),

Enlarge/Reduce, Density,

Page Layout, Skew Adjustment,

Ink Save Mode, Thin Paper Copy and Duplex Copy, that you have changed, to the factory settings.

a Press (COPY).

b Press a or b to choose Factory Reset. Press OK.

c Press 1 to choose Yes. d Press Stop/Exit.

49

Contents

Page Page Table of Contents General setup Security features Sending a fax Receiving a fax Dialing and storing numbers Printing reports Making copies USB Flash memory drive Printing photos from a camera Routine maintenance Glossary Index 1 General setup Beeper Volume Speaker Volume Page Setting the backlight brightness Setting the Dim Timer for the backlight Setting the Wallpaper Setting up the prefix number Changing the prefix number Page 2 Security features Setting and changing the Administrator Password Setting the administrator password Changing the administrator password Setting up restricted users Turning Secure Function Lock on/off Turning Secure Function Lock on Turning Secure Function Lock off Switching users Changing to the Public mode 3 Sending a fax Changing fax resolution Restoring fax settings to the factory settings Sending a fax manually Sending a fax at the end of a conversation Dual Access (Black & White only) Broadcasting (Black & White only) Before you begin the broadcast How to broadcast a fax Canceling a Broadcast in progress Real Time Transmission Overseas Mode Delayed Faxing (Black & White only) Delayed Batch Transmission (Black & White only) Checking and canceling waiting jobs Polled Transmit (Black & White only) Setup for polled transmit 4 Receiving a fax Paging Fax Storage Printing a fax from the memory PC-FaxReceive (Windows® only) Changing the destination PC Turning off Memory Receive operations Changing Memory Receive operations Setting a Remote Access Code Using your Remote Access Code Remote Fax commands Retrieving fax messages Changing your Fax Forwarding number Printing a reduced incoming fax Receiving a fax at the end of a conversation Polling receive Setup to receive polling Sequential polling (Black & White only) 5 Dialing and storing numbers Setting up your area code (USA only) Special line considerations Roll-overtelephone lines Two-linetelephone system Converting telephone wall outlets Installing machine, external two-lineTAD and two-linetelephone Outgoing Call Caller ID history Dialing access codes and credit card numbers Storing One Touch numbers from Outgoing Calls Storing One Touch numbers from the Caller ID history Storing Speed Dial numbers from Outgoing Calls Storing Speed Dial numbers from the Caller ID history Setting up groups for broadcasting Changing a Group name Deleting a Group Deleting a number from a Group 6 Printing reports How to print a report 7 Making copies Enlarging or reducing the copied image Making N in 1 copies or a poster (Page Layout) Page 2 in 1 ID Copy Sorting copies using the ADF Ink Save Mode Adjusting Density Thin Paper Copy Skew Adjustment Book Copy Watermark Copy Using a template Using a media card or USB Flash memory drive Using a scanned paper document as your watermark Duplex (2-sided)copying Page PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive Movie printing Print Index (Thumbnails) Printing Photos Print All Photos Auto Correct Enhance Photos Enhance Skin-Tone Enhance Scenery Remove Red-Eye Fill Light Night Scene Whiteboard Monochrome Sepia Search by Date Slide Show Printing a photo during a Slide Show Trimming DPOF printing Paper options Paper Type Print Quality Paper and print size Adjusting Brightness Contrast and Color Brightness Contrast Color Enhancement (True2Life™) Cropping Borderless printing Print Date Glass Scan Size Auto Crop How to set a new default How to reset to the factory settings 9 Printing photos from a camera Printing Images Page A Routine maintenance Cleaning the machine’s printer platen Cleaning the paper feed rollers Cleaning the paper pick-uprollers Page Cleaning the paper pick- up rollers for paper tray #2 (MFC-J6710DWonly) Checking the ink volume Page Page B Glossary Page Page Page C Index Page Page Page Visit us on the World Wide Web http://www.brother.com