PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
d Press a or b to choose
Remove
Press OK.
When Remove
When Remove
Unable to Detect. is shown. Press OK.
Note
Press # to try Remove
e Press OK and enter the number of copies you want using the dial pad.
f Do one of the following:
Press OK and change the print settings. (See PhotoCapture Center™ print settings on page 59.)
If you do not want to change any settings, press Color Start to print.
Note
You can also adjust the effect level manually, by pressing a or b.
e Press OK and enter the number of copies you want using the dial pad.
f Do one of the following:
Press OK and change the print settings. (See PhotoCapture Center™ print settings on page 59.)
If you do not want to change any settings, press Color Start to print.
Fill LightFill Light is best used for adjusting photographs against the light.
a Make sure you have put the memory |
| |
card or USB Flash memory drive in the | 8 | |
proper slot. |
| |
Press | (PHOTO CAPTURE). |
|
b Press a or b to choose Enhance Photos. Press OK.
Night Scene is best used for adjusting night view photographs to make them more vivid.
a Make sure you have put the memory card or USB Flash memory drive in the proper slot.
Press (PHOTO CAPTURE).
b Press a or b to choose Enhance Photos. Press OK.
c
d Press a or b to choose Night Scene. Press OK.
c Press d or c to choose your photo. Press OK.
d Press a or b to choose Fill Light. Press OK.
Note
You can also adjust the effect level manually, by pressing a or b.
e Press OK and enter the number of copies you want using the dial pad.
f Do one of the following:
Press OK and change the print settings. (See PhotoCapture Center™ print settings on page 59.)
If you do not want to change any settings, press Color Start to print.
55