5.Guide the thread down the channel and pass the thread through the threading points 5678 next to the blue color marks following the numerical order in the accompanying illustration.

NOTE:

Make sure to thread both of the thread take-ups 7.

Continue on "Lower looper easy threading operation".

Lower looper easy threading operation

1.Slide the lower looper threading lever <A> to the right.

The lower looper <B> moves to the position illustrated as below.

<A>

<B><B>

CAUTION

Slide the threading lever only in the directions shown by the arrow. Forcefully moving the threading lever in any other direction may damage it.

Before sliding the lower looper threading lever, make sure the needle is at its highest position.

2. Pass the thread as illustrated.

3.Pass the thread through the eye of the lower looper.

English

4.Slowly turn the hand wheel, and make sure the lower looper returns to the original position.

NOTE:

If the lower looper thread breaks during sewing, cut and remove thread from both of the needles.

Before re-threading the lower looper, make sure that the lower looper re-threading is done exactly as diagrammed. The machine will not operate properly if the threading is not done in the proper sequence.

CAUTION

Thread the needles after the lower looper and upper looper have been threaded.

15