Trim trap

The optional trim trap <A> holds the trimmed fabric and thread produced when sewing.

<B>

<A>

To install:

Insert the trim trap <A> until it contacts the front cover.

NOTE:

Be sure to position the positioning guide <B> to the one on the machine.

To remove:

Slowly pull out the trim trap.

NOTE:

The optional trim trap can also be used as the foot controller holder.

CAUTION

Always remove the foot controller from the trim trap when carrying the machine.

Free-arm sewing (removing bed extension)

Free-arm sewing enables tubular pieces to be sewn more easily.

1. Remove the bed extension <A>.

<A>

NOTE:

Be careful not to lose the removed bed extension.

2.Position the fabric, and start sewing. (See CHAPTER 5.)

English

Wide table

Using the wide table <A> makes the large piece sewing easy.

To install:

Attach the wide table <A> by pushing it in the direction of the arrow until the edge line 1 is aligned to the line 2 of the bed extension <B>.

<B>

2

1

<A>

To remove:

To remove the wide table <A>, lift up the machine a little and then pull out the wide table <A> in the direction of the arrow.

<A>

NOTE:

Do not move the machine while the wide table <A> is attached, otherwise damage or injuries may occur.

5