Threading the upper looper
Run the thread in the sequence illustrated, following the pink color and the numbers next to each threading point.
5.Guide the thread down the channel and pass the thread through the threading points 5678 next to the pink color marks following the numerical order in the accompanying illustration.
NOTE:
Make sure to thread only through the upper thread take up 7.
1
2
9 
8
7
8 9
6
7
3
4
3
4
5
6 
6.Pass the thread through the eye of the upper looper 9.
NOTE:
If the upper looper thread breaks during sewing:
This may be caused by the lower looper thread getting caught on the upper looper. If this happens, lower the upperlooper by turning the hand wheel, remove the lower looper thread from the upper looper, and
1.Open the front cover by sliding to the right and guiding the top toward you.
2.Pull the thread off the spool and directly up through the thread holder 1 and the thread holder 2 on the thread tree from back to front.
3.Pass the thread through the thread guide 3 on the top of machine.
4.Pass the thread through the tension disc 4 which is in the channel next to the pink tension adjustment dial.
16