Manuals / Brands / Household Appliance / Sewing Machine / Brother / Household Appliance / Sewing Machine

Brother 884-B01, OVERLOCK MACHINE WARNING LABELS, Notes on the motor, CONGRATULATIONS ON CHOOSING THIS COMPACT OVERLOCK MACHINE

1 80

Download 80 pages, 4.23 Mb

CONGRATULATIONS ON CHOOSING THIS COMPACT OVERLOCK MACHINE

Your machine is a high quality, easy-to-use product. To fully enjoy all the features, we suggest that you study this booklet.

If you need more information regarding the use of your machine, your nearest authorized dealer is always happy to be of service.

Enjoy yourself!

CAUTION

When threading or replacing needle, the main power and light switch of the machine must be switched off or the plug must be removed from the socket-outlet.

When the machine is not in use, it is recommended that the electric supply plug is disconnected from the wall socket to avoid any possible hazards.

Notes on the motor

-The maximum operating speed of this sewing machine is 1,300 stitches per minute, which is quite fast compared to the normal operating speed of 300 to 800 stitches per minute for the ordinary sewing machine.

-The bearings in the motor are made of a special sintered, oil-impregnated alloy mounted in oilsoaked felt to withstand long hours of continuous operation.

-Continuous operation of the sewing machine can cause heat to build in the motor area, but not enough to adversely affect its performance.

It is important to keep fabric and paper away from the air openings on the back and sides of the machine so air can get to these openings.

-When the motor is running, sparks can be seen through the air openings in the motor bracket on the side opposite the hand wheel. These sparks are produced by the carbon brushes and the commutator, and are part of the machines normaloperation.

WARNING LABELS (for complying with UL and CSA requirements)

The following warning labels are on the machine.

Be sure to observe the precautions described in the labels.

1 Caution (U.S.A. and CANADA only)								Label locations

2 Face plate sticker (U.S.A. and CANADA only)

1

2

III

Contents

http://solutions.brother.com Page IMPORTANT CONGRATULATIONS ON CHOOSING THIS COMPACT OVERLOCK MACHINE Notes on the motor WARNING LABELS Page Page Accessories Included accessory Optional accessory Powering the machine Turning on the machine Operation Turning direction of hand wheel Opening/ Closing front cover Trim trap Wide table Retracting knife Stitch length Stitch width Differential feed Differential feed adjustment Adjusting the presser foot pressure Tension adjustment dial Tension control Chart of thread tension adjustment, Two-needle (Four-thread) Chart of thread tension adjustment, One-needle (Three-thread) Chart of thread tension adjustment, One-needle (Two-thread) Needle Needle description How to check the needle Removing/Installing the needle Thread tree How to use the thread spool cap How to use the thread net Before threading Thread for two-needle four-thread Thread for one-needle three-thread overlock stitch (left needle) Thread for one-needle two-thread overlock stitch (right needle) Threading the lower looper Lower looper easy threading operation Threading the upper looper Threading the left needle Threading the right needle Threading the needle (using the needle threader) SEWING MATERIALS,THREADS AND NEEDLES COMPARISON CHART Stitchselection Four-threadoverlock stitch Three-threadoverlock stitch 5 mm (3/16 inch) Three-threadoverlock stitch 2.8 mm (7/64 inch) Two-threadoverlock stitch 5 mm (3/16 inch) Chaining-off Tostartsewing Toremovework Tosecurechain Method Ifthreadsbreakduringsewing Tosewfinematerials To use the stitch finger W Two-threadsewing How to set the thread change assembly Chart of two-threadoverlock stitch Narrowoverlock/Rolledhemmingstitch Instructions for both narrow overlock/ Rolled hemming stitches Chart of narrow overlock/ Rolled hemming stitch Page Cleaning Oiling Blind stitch foot Features Blind stitching Flatlock stitching Pin tuck stitching Taping foot Machine setting (type of stitch): How to set the elastic / tape Test sewing Pearl sequence foot Preparation How to adjust the machine How to set fabric and pearl Pipingfoot How to set fabric and piping tape Start sewing Gatheringfoot How to set fabric Specifications Use Sewing speed Stitch width Stitch length (pitch) Page IMPORTANTE ENHORABUENA POR HABER ELEGIDO ESTA COMPACTA MAQUINA OVERLOCK Notas sobre el motor Dentro de la tapa trasera Page Accesorios Accesorios incluidos Accesorios opcionales Encendido de la máquina Activación de la máquina Funcionamiento Cambio de la dirección de la ruedecilla Apertura/cierre de la tapa delantera Orificio de corte Costura de mangas (extracción del suplemento para la mesa) Mesa ancha Repliegue de la cuchilla Largo de las puntadas Ancho de las puntadas Alimentador con diferencial Ajuste del alimentador con diferencial Ajuste de la presión del prensatelas Disco de ajuste de la tensión Control de la tensión Tabla de ajuste de tensión de los hilos, dos agujas (cuatro hilos) Tabla de ajuste de tensión de los hilos, una aguja (tres hilos) Tabla de ajuste de tensión de los hilos, una aguja (dos hilos) Aguja Descripción de la aguja Cómo comprobar la aguja Desmontaje/instalación de la aguja Árbol del hilo Como utilizar el tope del carrete Cómo utilizar la malla para hilo Antes de enhebrar Enhebrado para puntadas Overlock de dos agujas y cuatro hilos Enhebrado para puntadas Overlock de una aguja y tres hilos (aguja izquierda) una aguja y dos hilos (aguja derecha) Enhebrado del áncora inferior Proceso simple de enhebrado del áncora inferior Enhebrado del áncora superior Enhebrado de la aguja izquierda Enhebrado de la aguja derecha Enhebrado de la aguja (utilizando el enhebrador de aguja) Page Selección de las distintas puntadas Puntada overlock de cuatro hilos Puntada overlock de tres hilos 5 mm Puntada overlock de tres hilos 2,8 mm Costura de prueba Cadeneta Para empezar a coser Para retirar el trabajo Para asegurar la cadeneta Método Si los hilos se rompen al coser Para coser tejidos finos Para utilizar la uñeta de puntadas W Puntada de dos hilos Cómo ajustar el conjunto de cambio de hilo Tabla de puntada Overlock de dos hilos Puntada overlock estrecha/de dobladillo enrollado Tabla de puntada overlock estrecha/de dobladillo enrollado Page Limpieza Engrasado Prensatelas para puntadas invisibles Características Puntadas invisibles Puntadas overlock planas Puntadas de pliegues pequeños Prensatelas para cintas Ajuste de la máquina (tipo de puntada): Como ajustar la cinta o el elástico Costura de prueba Prensatelas para tira de perlas Preparación Cómo ajustar la máquina Cómo ajustar el tejido y las perlas Prensatelas para ribeteados Cómo ajustar el tejido y la cinta de ribetear Empiece a coser Prensatelas fruncidor Cómo ajustar el tejido Especificaciones Uso Velocidad de costura Ancho de las puntadas Largo de las puntadas (altura)