Manuals / Brands / Household Appliance / Sewing Machine / Brother / Household Appliance / Sewing Machine

Brother 884-B01, OVERLOCK MACHINE Taping foot, Machine setting (type of stitch):, How to set the elastic / tape, Test sewing, Features

1 80

Download 80 pages, 4.23 Mb

8.Align the fold with the guide and insert the fabric up to the needle position.

3 Adjusting screw

4 Fabric guide

9.Guide the fold in the fabric to sew half way between the needle and the upper knife.

10.Continue sewing until all marked lines have been sewn.

Correct minor contractions by hand.

Taping foot

Features

By using the tape presser foot, you can sew tapes, as well as elastics and hem at the same time beautifully.

-Tapes or elastics from 6mm up to 12mm width can be sewn.

-Attatching tapes is very useful for reinforcement on stretchable materials sucn as knitted garment at shoulder. Also attaching elastics is suitable for sewing cuffs, necklines, etc.

<A> <B>

<A> Usage of the elastic <B> Usage of the tape

Machine setting (type of stitch):

- 2 needle 4 thread overlock		English
- 2 needle 4 thread overlock
- 1 needle 3 thread overlock (Either needle can
be used.)
How to set the elastic / tape
1 4	5

2 3

1.Attach the taping foot (see CHAPTER 1 "Attaching/ Removing presser foot").

2.Lift the presser foot lever.

3.Turn the hand wheel so that the line on the hand wheel is aligned to the line on the machine (see CHAPTER 1 "Turning direction of hand wheel").

4.Flip open the tape guide 1, then set the presser adjusting dial 2 at "0".

5.Put the tape or the elastic 5 through the slot

3.

6.Insert the tape or the elastic 5 through the slot 3 so that the righthand side of tapes / elastics will be set along the guide 4.

7.Flip shut the tape guide 1 so that it will be set at the lefthand side of tapes / elastics.

Test sewing

5

1.Lift the presser foot lever.

2.Insert the materials, till the edge of the materials will touch the blade.

3.Lower the presser foot lever.

4.Set the stitch width control dial at "5".

31

Contents

http://solutions.brother.com Page IMPORTANT CONGRATULATIONS ON CHOOSING THIS COMPACT OVERLOCK MACHINE Notes on the motor WARNING LABELS Page Page Accessories Included accessory Optional accessory Powering the machine Turning on the machine Operation Turning direction of hand wheel Opening/ Closing front cover Trim trap Wide table Retracting knife Stitch length Stitch width Differential feed Differential feed adjustment Adjusting the presser foot pressure Tension adjustment dial Tension control Chart of thread tension adjustment, Two-needle (Four-thread) Chart of thread tension adjustment, One-needle (Three-thread) Chart of thread tension adjustment, One-needle (Two-thread) Needle Needle description How to check the needle Removing/Installing the needle Thread tree How to use the thread spool cap How to use the thread net Before threading Thread for two-needle four-thread Thread for one-needle three-thread overlock stitch (left needle) Thread for one-needle two-thread overlock stitch (right needle) Threading the lower looper Lower looper easy threading operation Threading the upper looper Threading the left needle Threading the right needle Threading the needle (using the needle threader) SEWING MATERIALS,THREADS AND NEEDLES COMPARISON CHART Stitchselection Four-threadoverlock stitch Three-threadoverlock stitch 5 mm (3/16 inch) Three-threadoverlock stitch 2.8 mm (7/64 inch) Two-threadoverlock stitch 5 mm (3/16 inch) Chaining-off Tostartsewing Toremovework Tosecurechain Method Ifthreadsbreakduringsewing Tosewfinematerials To use the stitch finger W Two-threadsewing How to set the thread change assembly Chart of two-threadoverlock stitch Narrowoverlock/Rolledhemmingstitch Instructions for both narrow overlock/ Rolled hemming stitches Chart of narrow overlock/ Rolled hemming stitch Page Cleaning Oiling Blind stitch foot Features Blind stitching Flatlock stitching Pin tuck stitching Taping foot Machine setting (type of stitch): How to set the elastic / tape Test sewing Pearl sequence foot Preparation How to adjust the machine How to set fabric and pearl Pipingfoot How to set fabric and piping tape Start sewing Gatheringfoot How to set fabric Specifications Use Sewing speed Stitch width Stitch length (pitch) Page IMPORTANTE ENHORABUENA POR HABER ELEGIDO ESTA COMPACTA MAQUINA OVERLOCK Notas sobre el motor Dentro de la tapa trasera Page Accesorios Accesorios incluidos Accesorios opcionales Encendido de la máquina Activación de la máquina Funcionamiento Cambio de la dirección de la ruedecilla Apertura/cierre de la tapa delantera Orificio de corte Costura de mangas (extracción del suplemento para la mesa) Mesa ancha Repliegue de la cuchilla Largo de las puntadas Ancho de las puntadas Alimentador con diferencial Ajuste del alimentador con diferencial Ajuste de la presión del prensatelas Disco de ajuste de la tensión Control de la tensión Tabla de ajuste de tensión de los hilos, dos agujas (cuatro hilos) Tabla de ajuste de tensión de los hilos, una aguja (tres hilos) Tabla de ajuste de tensión de los hilos, una aguja (dos hilos) Aguja Descripción de la aguja Cómo comprobar la aguja Desmontaje/instalación de la aguja Árbol del hilo Como utilizar el tope del carrete Cómo utilizar la malla para hilo Antes de enhebrar Enhebrado para puntadas Overlock de dos agujas y cuatro hilos Enhebrado para puntadas Overlock de una aguja y tres hilos (aguja izquierda) una aguja y dos hilos (aguja derecha) Enhebrado del áncora inferior Proceso simple de enhebrado del áncora inferior Enhebrado del áncora superior Enhebrado de la aguja izquierda Enhebrado de la aguja derecha Enhebrado de la aguja (utilizando el enhebrador de aguja) Page Selección de las distintas puntadas Puntada overlock de cuatro hilos Puntada overlock de tres hilos 5 mm Puntada overlock de tres hilos 2,8 mm Costura de prueba Cadeneta Para empezar a coser Para retirar el trabajo Para asegurar la cadeneta Método Si los hilos se rompen al coser Para coser tejidos finos Para utilizar la uñeta de puntadas W Puntada de dos hilos Cómo ajustar el conjunto de cambio de hilo Tabla de puntada Overlock de dos hilos Puntada overlock estrecha/de dobladillo enrollado Tabla de puntada overlock estrecha/de dobladillo enrollado Page Limpieza Engrasado Prensatelas para puntadas invisibles Características Puntadas invisibles Puntadas overlock planas Puntadas de pliegues pequeños Prensatelas para cintas Ajuste de la máquina (tipo de puntada): Como ajustar la cinta o el elástico Costura de prueba Prensatelas para tira de perlas Preparación Cómo ajustar la máquina Cómo ajustar el tejido y las perlas Prensatelas para ribeteados Cómo ajustar el tejido y la cinta de ribetear Empiece a coser Prensatelas fruncidor Cómo ajustar el tejido Especificaciones Uso Velocidad de costura Ancho de las puntadas Largo de las puntadas (altura)