KNOWING YOUR SEWING
5Lower the presser foot lever and fix the presser foot onto the shank. If the presser foot is in the correct place, the bar should snap in.
1
2
1Shank
2Bar
■Presser foot installation orientation
CAUTION
●If the presser foot is not installed with the correct orientation, the needle may strike the presser foot, which may bend or break the needle and cause injury.
THE CONTROLS
Pattern selection dial
CAUTION
●When you use the pattern selection dial to choose a pattern, raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up. If the needle is in the down position when you turn the pattern selection dial, the needle, presser foot or fabric may be damaged.
To choose a stitch, simply turn the pattern selection dial in either direction. The next section shows recommended stitch lengths and widths.
2
1
1Pattern selection dial
2Chosen pattern number
Stretch stitching
Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.
Setting the stitch length dial to “
” changes the selected pattern to a stretch stitch.
9
