Brother X26, X08, X16, 885-X28, 885-X18 Install the needle plate, and then tighten the screws

——————

6Use the cleaning brush or a vacuum cleaner to remove any dust from the race and its surrounding area.

1

2

1Cleaning brush

2Race

• Do not apply oil to the bobbin case.

7Insert the bobbin case so that the ▲ mark on the bobbin case aligns with the ● mark on machine as shown below.

1

1

2

2

• Align the ▲ and ● marks.

3

1▲ mark

2● mark

3Bobbin case

•Make sure that the indicated points are aligned before installing the bobbin case.

8Install the needle plate, and then tighten the screws.

1

1Screws

•Make sure that you install the needle plate securely.

CAUTION

●Never use a bobbin case that is scratched; otherwise the upper thread may become tangled, the needle may break, or sewing performance may suffer. For a new bobbin case (part code: XE9326-001), contact your nearest authorized service center.

●Make sure that you fit the bobbin case properly, otherwise the needle may break.

6

46