Bryant 551C installation instructions 551B,C, Roof Curb Alignment

NOTES:

1.	Place unit on curb as close as possible to the duct end.
2.	Dimension in ( ) is in millimeters.

3.Hook rigging shackles through holes in base rail as shown in detail “A.” Holes in base rails are centered around the unit center of gravity. Use wooden top skid when rigging to prevent rigging straps from damaging unit.

4.Weights include base unit without economizer. See Table 1 for unit operating weights with accessory economizer.

5.Weights include base unit without the Perfect Humidityt adaptive dehumidification system. See Table 1 for unit operating weights with the Perfect Humidityt system.

C06111

				Fig. 6 ---	Rigging Details
UNIT	OPERATING					DIMENSIONS
		WEIGHT		“A”			“B”			“C”
551C
	lb		kg	in.	mm	in.		mm	in.		mm
024	435		197	73.69	1872	35.50		902	33.31		847
036	445		202	73.69	1872	35.50		902	33.31		847
048	465		211	73.69	1872	35.50		902	33.31		847
060	520		236	73.69	1872	35.50		902	41.31		1050
UNIT	OPERATING					DIMENSIONS
		WEIGHT		“A”			“B”			“C”
551B
	lb		kg	in.	mm	in.		mm	in.		mm
036	530		240	73.69	1872	35.50		902	33.31		847
048	540		245	73.69	1872	35.50		902	33.31		847
060	560		254	73.69	1872	35.50		902	33.31		847
072	635		288	73.69	1872	35.50		902	41.31		1050

! WARNING

PERSONAL INJURY AND PROPERTY DAMAGE

HAZARD

Failure to follow this warning could result in personal injury, death and property damage.

All panels must be in place when rigging and lifting.

551B,C

C06208

Fig. 7 ---Roof Curb Alignment

5