Bryant 541A, 575C B. Locate Unit, C. Mount Unit, 575B072 Unit Dimensions, Bottom, Rear, Front

B. Locate Unit

For service access and unrestricted airflow, provide clearance on each end and side of unit. Position unit so that there is unrestricted airflow above unit.

NOTE: Before mounting unit, remove holddown brackets and release skid.

If conditions or local codes require unit to be fastened to pad, use the mounting holes in the base rails.

C. Mount Unit

The unit may be mounted on a solid, level concrete pad, on accessory mounting legs, or on field-supplied raised supports at each mounting position. (Note that mounting hardware is field supplied.)

Bolt unit securely to pad or supports after unit is in position and is level. Be sure to mount unit level to ensure proper oil return to compressors. Mounting holes on unit can be used to secure unit to vibration isolators, if required.

	A	B	CONTROL BOX
	FRONT
	7/8
	4 PLACES
			Line & Low
19 3/8			Voltage Wiring
			Entrances		5-3/4
	27	35
			1-1/2
		24 1/2
	24
			2-1/8
10	C		9-3/4	1-1/8
		4 7/8
	33	D			2-1/2
					4-1/4	1-1/2

BOTTOM REAR

38-1/2

1-1/2

33

35

38-1/2

33	1-1/2	1-1/2
TOP	FRONT

NOTES:

1. All dimensions are in inches.

2. Recommended clearance for proper airflow (local codes or jurisdictions may prevail): Top — 60 in.

Sides — 24 in. on 3 sides, one side may be 6 in. (Control box side should have 24-in. clearance for service access.)

3. Corner Weights (lb): A = 86 B = 84 C = 92 D = 90

Fig. 1 — 575B072 Unit Dimensions

—2—