Bryant 580J Heating Rating Table LOW NOx1, Sound Performance Table, Unit Cooling, Stages Weighted

580J

Table 5 – HEATING RATING TABLE - LOW NOx1

				LOW NOx HEAT EXCHANGER			TEMP RISE		THERMAL	AFUE
	UNIT		GAS HEAT						EFFICIENCY
				INPUT / OUTPUT	INPUT / OUTPUT		(DEG F)			(%)
									(%)
				STAGE 1 (MBH)	STAGE 2 (MBH)
			LOW	---	60	/ 50	20	--- 50	81%	80%
		04	MED	---	90	/ 74	30	--- 60	81%	81%
Phase			HIGH	---		---		---	---	---
			LOW	---	60	/ 50	20	--- 50	81%	80%
Single		05	MED	---	90	/ 74	30	--- 60	81%	81%
			HIGH	---	120	/ 101	40	--- 70	81%	80%
			LOW	---	60	/ 50	15	--- 50	81%	80%
		06	MED	---	90	/ 74	25	--- 60	80%	81%
			HIGH	---	120	/ 101	35	--- 70	80%	81%
			LOW	---	60	/ 50	20	--- 50	81%	80%
		04	MED	---	90	/ 74	30	--- 60	81%	81%
Phase			HIGH	---		---		---	---	---
			LOW	---	60	/ 50	20	--- 50	81%	80%
Three		05	MED	---	90	/ 74	30	--- 60	81%	81%
			HIGH	---	120	/ 101	40	--- 70	81%	80%
			LOW	---	60	/ 50	15	--- 50	81%	80%
		06	MED	---	90	/ 74	25	--- 60	80%	81%
			HIGH	---	120	/ 101	35	--- 70	80%	81%

NOTE:

1.Units meet California’s South Coast Air Quality Management District (SCAQMD) Low---NOxemissions requirement of 40 nanograms per joule or less.

Table 6 – SOUND PERFORMANCE TABLE

UNIT	COOLING				OUTDOOR SOUND (dB)
	STAGES	A---WEIGHTED	63	125	250	500	1000	2000	4000	8000
04A	1	80	90.6	80.9	80.2	76	74.6	71.3	68.5	63.9
05A	1	81	90.9	84.6	79.5	77.9	76.5	71.1	66.9	62.5
06A	1	78	84.0	82.2	76.3	74.8	72.5	68.8	65.6	61.8
07A	1	78	88.8	81.8	76.9	74.4	73.3	69.8	66.3	62.7
08A	1	82	90.1	82.6	81.0	79.4	77.0	73.0	70.4	66.7
08D	2	82	85.8	84.3	80.5	78.7	76.4	72.7	68.3	65.1
09A	1	83	91.2	86.4	81.9	81.0	78.3	73.9	71.4	67.3
09D	2	82	88.6	85.0	81.6	79.5	77.4	74.1	71.0	66.3
12A	1	82	88.6	85.0	81.6	79.5	77.4	74.1	71.0	66.3
12D	2	82	89.0	83.1	80.5	78.5	75.5	71.6	69.6	69.3
14D	2	87	87.0	85.2	84.6	84.9	82.2	78.4	75.3	72.9

LEGEND	NOTES:
dB --- Decibel	1.	Outdoor sound data is measure in accordance with
		AHRI standard 270---2008.
	2.	Measurements are expressed in terms of sound power.
		Do not compare these values to sound pressure values
		because sound pressure depends on specific environ-
		mental factors which normally do not match individual
		applications. Sound power values are independent of
		the environment and therefore more accurate.
	3.	A ---weighted sound ratings filter out very high and very
		low frequencies, to better approximate the response of

“average” human ear. A ---weighted measurements for Bryant units are taken in accordance with AHRI stand- ard 270---2008.

10