VII. STEP 7 — INSTALL THERMOSTAT
These systems use a 3-speed thermostat. The thermostat monitors the system operation and controls the operating mode. To change settings or refer to the thermostat Operat- ing Instructions.
Mount thermostat to a wall in the occupied space using 2 field-supplied screws. Locate the thermostat in an area that is not subjected to drafts or direct sunlight through windows. Locate thermostat on an interior wall whenever possible. Figure 18 shows available thermostats.
a40-935
LEGEND
TB — Terminal Block
Fig. 16 — Line Power Connections
a40-630
Fig. 15 — Routing Drain Piping
