Using the
Diverse Deskphone
Making and receiving external calls
To make an external call
Press keypad buttons in order shown
Lift the handset and dial the number.
Or,
KEYPAD Enter the number on the keypad, check that it is correct and then lift the handset to dial.
If you make a mistake entering
numbers, use DELETE to delete them.
Please note
If another handset or Deskphone is already in use and all available lines are in use, you will hear an engaged tone when attempting to dial out.
To end a call
Replace the handset on the cradle.
To use the loudspeaker
This allows you to talk without holding the handset.
Press LOUDSPEAKER before or after dialling the number.
Or during a call
Press and hold the LOUDSPEAKER button whilst replacing the handset on the base, then release the loudspeaker button.
+You can adjust the loudspeaker/ handset volume during a call with
–+/– buttons on the Deskphone.
Please note
If you wish to switch to loudspeaker during a call, press and hold down the LOUDSPEAKER button and do not release it until you have placed the handset in the cradle.
If you fail to hold down the
LOUDSPEAKER button, the call will
be disconnected.
BASIC FUNCTIONS
13