BT 1010 REGISTERING HANDSET.PLEASE WAIT

Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
63
5. You are then asked to enter the system PIN (0000) and
press OK.
6. Shows REGISTERING HANDSET.PLEASE WAIT .
7. You should then get confirmation that the handset is
registered.
The handset will automatically be allocated the next available
handset number which will be displayed when in standby mode.
If your handset is already registered to
abase, the
*
symbol will be shown to
the right of the base number.
If there are already 5 handsets
registered to the base you will hear a
double beep.
Each digit of the PIN code will be
displayed as a
*
for security reasons.
Press Clear if you enter an
incorrect digit.
If you enter the wrong PIN code you
will hear a double beep.
If registration fails, the handset will
return to standby mode and you will
need to repeat the registration
procedure and try a different base
number.
Using additional handsets
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 63