7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 67

Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916

Software upgrades

67

 

Automatic software upgrade

Your BT Home Hub checks regularly for handset software upgrades. If there is a new version of software available it will send a message to any registered handsets needing to be upgraded.

If you have handsets located around the home you will need to place the charging cradle and phone into the front of the hub to receive the upgrade.

When the handset display shows NEW HANDSET SOFTWARE. DOWNLOAD NOW? You can either select Yes to upgrade immediately or select Later .

The message will be displayed again 24 hours later. If Yes is pressed, a message is displayed requesting you to put the handset on the charger linked to the hub.

During download, once it is on the charger, the display shows

DOWNLOADING, LEAVE HANDSET IN CHARGER.... The backlight may turn off but do not remove the handset from the charger. Leave handset in charger. When the upgrade is complete, DOWNLOAD COMPLETE is displayed and the handset resets and automatically re-connects to the base.

If you have several handsets around the home and want to upgrade all of them, you don't need to change the cradle in the Hub everytime. Just upgrade all the handsets via the same cradle within the hub.

Press Later if you decide not to upgrade.

When the handset is on the charger and the software is being upgraded, you will not be able to use the handset to receive calls.

Upgrades are free of charge and there are no call fees associated with upgrading. It's merely there to give you the latest version of software available. These may contain new features or fixes.

Page 67
Image 67
BT 1010 manual Software upgrades, Automatic software upgrade