Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Getting started8
2. Attach the cradle to the BT
Home Hub.
3. Slide open the battery
compartment on the back
of your BT Hub Phone
handset. Insert the 2 x AAA
rechargeable batteries
supplied. Slide back the
cover to close.
4. Place the BTHub Phone 1010
intothe cradle on the BT
Home Hub. You should hear a
beep when the handset has
been placed correctly. Charge
your handset for at least 24
hours on first charge before
using the phone.
IMPORTANT
The hub must be plugged into the
mains power socket at all times.
Talk/Standby time
In ideal conditions, the handset
batteries should give about 7 hours
talk time or 100 hours standby.
Note that new batteries do not reach
full capacity until they have been in
normal use for several days.
Battery symbols
Battery charged
Batteryhalf charged
Batterylow
Battery empty (icon will be red)
Important
You can leave your handset in the
charging cradle attached to the BT
Home Hub if you wish or you can locate
your handset anywhere in your home,
using the mains power adapter and
charging cradle to keep the handset
charged. Occasionally you will need to
connect the handset to the charger
connected tothe BTHome Hub to
receive new upgrades. You will be asked
to do this when there is new software.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 8