To broadcast a document
You can set your machine to send a document to up 10 different numbers (broadcasting).
See “To fax from memory” below.
To fax from memory
Your PaperJet 55E has a memory which lets you store one document for sending at a
Place document face down in the document feeder.
If necessary set the Contrast and Resolution settings.
Display shows TX FROM MEMORY
The document is scanned into the memory. Display shows STORING then TYPE TIME
HH:MM
If using the 12 hour clock, press the Function button to switch between a for AM and p for PM.
Press the < > buttons to move the cursor.
/
Enter the time at which you want your fax to be sent, e.g. 18.30 or press the Start button to select the current time.
Display shows TYPE FAX NUMBER
/
Use the keypad to dial the number you want.
Display shows TYPE FAX NUMBER. If required, enter the second number to which you want to send your fax and press the Start button again.
Repeat the last step until you have entered all the numbers you want up to a maximum of 10 when the display will show END OF LIST.
After entering your last number press Start again to confirm. Display shows TX SET then AUTOMATIC RX (or current receive mode) and MEMORY TX.
To change, re-send or cancel a stored document
When you have stored a document in the memory for sending later:
Display shows AUTOMATIC RX
MEMORY TX
Display shows TX FROM MEMORY
Display shows ALREADY ENTERED
Display shows PRINT SETTING?
Press to switch between this and the other two options CHANGE PARAM? or CANCEL
SETTING?
Press to select the option displayed.
PRINT – you get a print out of the fax details and then the machine returns to standby.
20
