8Install the starter print cartridge
Open the printer compartment cover.
Remove the print cartridge from its packaging. Holding it by the finger grip, peel the protective film from the print nozzles.
Avoid touching the nozzles and metal electrical contacts.
Insert the cartridge into the holder with the electrical contacts facing towards the front of the machine.
Pull the cartridge towards the front of the machine until you hear it click into position.
Close the cover.
If the display continues to show CHECK PRINT HEAD the cartridge may not be installed properly. Open the cover and check that the cartridge is correctly orientated and clicked into position.
NOTE
To replace the cartridge when it runs out of ink, follow the instructions in the Maintenance Section on page 44.
Should the message persist, you may need to clean the electrical contacts and the carriage (see ‘To clean the cartridge and nozzles’, page 46).
13