Buffalo Technology WZR-G108 setup guide Standalone Devices

AOSS (AirStation One-Touch Secure System™) is a simple, one-touch setup for connecting wireless clients to an access point while setting up the most secure possible connection. Users no longer need to worry about choosing the proper security protocols, IP addresses, or ESS-ID's. The intelligence of AOSS

determines the most optimal connection and configures itself in seconds.

Note: AOSS automatically creates a secure connection between your AOSS Access Point and client. You must have a Buffalo AOSS enabled wireless client device to use the AOSS

features of your AOSS Access Point/Router.

◗Configure your WZR-G108's network connection by referring to the above mentioned instructions.

◗Once the WZR-G108 has been configured, follow the directions to install your wireless client device and its drivers if necessary. Certain wireless client adapters require client software to configure them. If your device has a Client Manager, then install it as well.

Note: If the wireless client adapter is installed on a PC, then the AOSS client manager will need to be installed as well. If your wireless client adapter is a standalone device that does not require a PC, then just power up the device.

Standalone Devices:

Ethernet Converters and

Access Point Bridges

Client Manager Devices:

CardBus, USB, and PCI Adapters

Standalone	Client Manager
AOSS Device	Device

10