OPERATING THE PRESET PORTION CONTROL DISPENSER

(Models LCA-2 PC, LCA-2C PC, LCA-2A PC)

Set the Function Selector Switch to Normal and the Mode Selector Switch to Run.

Dispensing Preset Portions of Coffee or Hot Water

1.Primary Volume Portion Dispense Mode. (Volume 1) Refer to Programming Functions on how to set this amount.

a.Place cup on the cup tray beneath the desired dispensing tip. For a large container, flip the cup tray up and place the container on top of the drip tray.

b.Momentarily press the appropriate dispense switch. The dispenser will automatically dispense the beverage at the preset amount. Allow the mix chamber to drain at the end of the cycle.

c.Remove cup or container.

2.Alternate Volume Portion Dispense Mode. (Volume 2) Refer to Programming Functions on how to set this volume.

a.Place the appropriate size container beneath the desired dispensing tip. For large containers, flip the cup tray up and place the container on top of the drip tray.

b.Momentarily press the Portion Switch. The Portion LED will illuminate for 5 seconds after the Portion Switch is pressed.

c.Momentarily press the corresponding Dispense Switch. If the user waits longer than 5 seconds to push the switch, the dispenser will default back to the Primary Volume preset amount. Alternate Portion Dispense Mode can be disabled at any time during the portion dispense by either momentarily pushing the Dispense Switch again or pressing the Stop button.

d.Wait for the container to fill and the dispenser to quit dispensing, then remove the container.

Push and Hold Dispensing of Coffee or Hot Water

Push and Hold Dispense Mode. See Programming Functions on how to set the Preset Volume to Zero.

a.Place cup on the cup tray beneath the desired dispensing tip. For a large container, flip the cup tray up and place the container on top of the drip tray.

b.Push and hold the corresponding dispense switch until the container is full.

c.Remove cup or container.

Filling Cambros or other large containers:

The dispenser is designed primarily for cups or other small containers that will fit under the dispense tips. However, it may be used to fill larger containers (up to 5 Gal) by use of an extension hose on the dispense tip. Removing the Flow Restrictors will increase the dispenser flow rate to 2.5 Oz/sec. (74 mL/sec.) and reduce the time to fill larger containers, (see Setting Dispenser Flow Rate.)

Care must be taken to insure that the mixed product flows freely from the dispense tip into the container.

1.Use a 5/8” I.D. or larger, NSF (National Sanitation Foundation) approved hose.

2.Use as short a hose as possible with no loops, bends or kinks in it.

3.Insure that the outlet of the hose is below the dispense tip and that the mixed product flows freely into the container

A properly sized and positioned hose will not run full or back up into the dispense tip. Failure to follow these directions can alter the mix ratio and/or cause flooding of the vent tube.

NOTE: The temperature of the product being dispensed will start to drop after ~2 gal. continuous draw. Recovery time will be dependent on the temperature of the supply water and the voltage at which the heater coil is being operated.

21

34766 120105

 

Page 21
Image 21
Bunn 34766.0000S manual Operating the Preset Portion Control Dispenser, Models LCA-2 PC, LCA-2C PC, LCA-2A PC

34766.0000S specifications

The Bunn 34766.0000S is a commercial-grade coffee maker that stands out for its efficiency and precision in brewing. Designed for high-volume environments such as restaurants, cafes, and offices, this coffee brewer is engineered to deliver a consistent and robust coffee flavor with every brew.

At the heart of the Bunn 34766.0000S is its unique brewing system, which employs a patented technology to optimize extraction. This system ensures that water is heated to the ideal temperature, usually around 200°F, for optimal flavor extraction from coffee grounds. The precise temperature control is essential in commercial settings, where the quality of coffee can significantly affect customer satisfaction.

The Bunn 34766.0000S features a stainless steel construction, which not only enhances its durability but also allows for easy cleaning and maintenance. The sleek design fits comfortably in any kitchen setting, and its compact size makes it suitable for countertops with limited space. With a 12-cup capacity, this machine is capable of producing multiple pots of coffee quickly, ensuring that demand is met during peak hours.

One of the standout features of the Bunn 34766.0000S is its Smart Brew technology. This innovative feature allows for customizable brewing settings, enabling users to adjust brew strength and flavor profiles according to their specific preferences. The machine includes a programmable timer, which can be set for automatic brewing, a significant advantage for businesses that require coffee to be ready at specific times.

Additionally, the Bunn 34766.0000S comes equipped with a built-in water tank, which keeps water at the optimal brewing temperature for instant coffee production. This feature minimizes waiting times and ensures that coffee is always fresh.

In terms of safety, the Bunn 34766.0000S is fitted with an advanced safety shut-off mechanism to prevent overheating and ensure that the machine operates within safe temperature limits. This reliability is crucial for busy establishments where operational efficiency is paramount.

In summary, the Bunn 34766.0000S is an exceptional choice for businesses looking for a dependable, high-quality coffee brewing solution. It combines innovative brewing technologies, user-friendly features, and a robust design to meet the demands of any commercial environment, making it an indispensable tool for serving delicious coffee consistently.