Bunn 34766.0000S manual Menu Screen Tank Temp Exit + Ready Temp Exit + Cabinet Temp Exit +, Action

MENU SCREEN

TANK TEMP 180

(-) EXIT (+)

READY TEMP 175

(-) EXIT (+)

CABINET TEMP 65

(-) EXIT (+)

LF PRODUCT DISP

.0GAL RESET?

LF PRODUCT DISP

.0GAL

RT PRODUCT DISP

.0GAL RESET?

RT PRODUCT DISP

.0GAL

ACTION	DESCRIPTION
Use the (+) or (-) buttons to	Sets the water Tank temperature [120 - 200°F]
adjust the target Temp.	or [49 - 93°C]
Use the (+) or (-) buttons to	Sets the hot water Ready temperature. Typically
adjust the target Temp.	set to the minimum desired dispense temp.
Use the (+) or (-) buttons to	LCC Models Only: Sets the Chilled Cabinet target
adjust the target Temp.	temperature [50 - 75°F] or [4 - 24°C]
Select (RESET) to clear total	Selecting Reset will clear the Current accumulated
	volume of concentrate dispensed through the Left
	dispenser. Gal (Liters)
NONE	Displays the Total accumulated volume of
	concentrate dispensed through the Left dispenser.
	Not Re-settable. Gal (Liters)
Select (RESET) to clear total	Selecting Reset will clear the Current accumulated
	volume of concentrate dispensed through the
	Right dispenser. Gal (Liters)
NONE	Displays the Total accumulated volume of
	concentrate dispensed through the Right
	dispenser. Not Re-Settable. Gal (Liters)

The following functions can be Password Protected. If you wish to prevent others from accessing these functions, enter a 4 digit code of your choice. Record your password code [_ _ _ _], as you will need it to access these functions in the future.

ENTER PASSWORD

(-) 0 (+)

SET PASSWORD ?

(-) 0 (+)

SELECT UNITS

ENG EXIT METRIC

CHILLED UNIT ? NO EXIT YES

RINSE ALARM ? NO EXIT YES

Use the (+) or (-) buttons to	Enter the access Code to view the remaining
enter password.	functions. Factory Default = 0.
Use the (+) or (-) buttons to	Enter your own Code to prevent access to the
change the password.	remaining functions. [0 to 9999]
Select the preferred units	Used to select the preferred units of measurement.
	(Oz., Gal, deg F) or (mL, L, deg C)
Select (YES) or (NO)	LCA Models without Chiller select (NO)
	LCC Models with Chiller select (YES)
Select (YES) or (NO)	Selecting Yes will enable the Rinse Alarm function,
	(see Rinse Alarm)

If NO - go to BIB EMPTY LOCKOUT menu.

15 34766 120105