Cabletron Systems 2H253-25R manual Installing Options, Installing the Device

Installing Options

Table 3-1 Contents of 2H253-25R Carton

Item	Quantity
2H253-25R	1
Antistatic Wrist Strap	1
Console Cable Kit	1
Rackmount Kit	1
Strain-Relief Bracket	1
Manual Accessory Kit	1
Power Cord	2

3.Remove the tape seal on the non-conductive bag to remove the 2H253-25R.

4.Perform a visual inspection of the device for any signs of physical damage. Contact Cabletron Systems if there are any signs of damage. Refer to Section 1.2 for details.

3.2INSTALLING OPTIONS

NOTE

Install any optional equipment before proceeding to Section 3.3.

If the 2H253-25R is to be installed with an optional HSIM or VHSIM, refer to the user’s guide of that device for the installation instructions.

3.3INSTALLING THE DEVICE

The 2H253-25R may be installed on a tabletop, shelf, or in a 19-inch rack. Section 3.3.1 describes a tabletop or shelf installation and Section 3.3.2 describes the rackmount installation.

To prevent possible personal injury and/or damage to the unit, do NOT connect power to the 2H253-25R until instructed to do so.

3-2Installation