Configuring the Trap Table
3-10 Trap MessagesOperational 406
For all ports except those noted below, this means that the link is up.
For SNA TPAD, this means that the XID exchange has been performed, and the
XID data received in the response frame matches the XID data conÞgured for the
TPAD subscriber. The link is ready to establish an X.25 connection with the
remote HPAD.
For SNA HPAD, this means that an XID or SNRM command frame has been
received for at least one of the link addresses conÞgured for the HPAD subscriber.
The link is ready to establish an X.25 connection with the remote TPAD.
Severity Major (Level 2)
Call Clr LCN = “n” cc = “n” dc = “n” 407
Self-explanatory.
Severity Informational (Level 4)
Action Depends on the cause. If necessary, contact your service
representative.
End of IPL 408
Self-explanatory.
Severity Informational (Level 4)
PVC is Up 409
Self-explanatory.
Severity Informational (Level 4)
PVC Reset 410
A Reset was sent on the PVC.
Severity Informational (Level 4)
Received Reset LCN = “n”, cc = “n” dc = “n” 411
A Reset was received on the designated LCN, with the cause code cc and
diagnostic code dc.
Severity Informational (Level 4)
Received Reset Confirm 412
A Reset ConÞrmation was received.
Severity Informational (Level 4)