Trap Messages 3-13
Configuring the Trap Table
LG Buffer MALLOC Problem PKTs Lost 435
This applies to a debug tool used by service personnel, and will not appear under
normal operation.
Severity Major (Level 2)
RCV Unknown Event Code from Net. 436
An unknown event was received from the network.
Severity Major (Level 2)
RCV Invalid Event Format from Net. 437
The node has received an event with an invalid format.
Severity Informational (Level 4)
DOS Error Handler Exceeded Limit 438
The FRX was performing a DOS operation and, for some reason, could not reach
DOS.
Severity Major (Level 2)
Action Reboot the node and watch for error messages during boot-up. If
the problem persists, contact your service representative.
Database Error, Access Restricted 439
The database is inconsistent with what the software expects.
Severity Critical (Level 1)
Action Contact your service representative.
Abrev Addr File Upd: ABVSUB.DAT 440
The Abbreviated Address Þle has been updated.
Severity Informational (Level 4)
Async Init File Upd: ASYSETUP.DAT 441
The Async Console Þle has been updated.
Severity Informational (Level 4)
BSC Device File Upd: BSCDSP.DAT 442
The BSC Interactive Devices Þle has been updated.
Severity Informational (Level 4)
LP Config File Upd: LPTYPE.DAT 443
The Line Processor conÞguration Þle has been updated.
Severity Informational (Level 4)