![](/images/new-backgrounds/1294596/29459663x1.webp)
Owner’s Manual | Installation of New Access Doors | |
|
|
|
INSTALLATION OF NEW ACCESS DOORS
Installing Access Doors
1.Provide cut out and door jamb with inside dimensions as follows:
16 1/4" X 19 “ for single door
28 1/4” x 19 3/8” for double door
2.Secure the steel frame with 16 screws of type #10 x fl” truss head phillips S/S.
3.Attach doors to frame.
4.Adjust doors as follows:
a)For height adjustment, loosen the two screws attached to each mounting plate.
b)Snap off hinge and secure mounting plate with #6 X 1” flat phillips S/S.
c)For side adjustment turn screw to increase or decrease door overlay.
d)For depth adjustment, loosen screw, adjust door to desired position and retighten screw.
30"
19"
Front Dimensions
23"23"
Double Access Door
Single Access Door
28 1/4"
16 1/4"
19"
19 3/8"
Rear
Single Door
Width | 18 1/4" |
Height | 19" |
Depth | 2 1/2" |
Double Door | |
Width | 28 1/4" |
Height | 19 3/8" |
Depth | 2 1/2" |
Figure 34. Access Door Installation
Page 31 | Owner’s Manual |