Natural Gas Requirements | Owner’s Manual |
NATURAL GAS REQUIREMENTS
Natural Gas Requirements
Always check the rating plate to make sure the gas supply you are hooking up to is the gas type the grill is manufactured for.
IMPORTANT WARNING: All Cal Flame grills are manufactured with the highest regard to safety. For this reason, Cal Flame grills are either manufactured to operate on Liquid Propane (LP) or Natural Gas (NG) and cannot be converted. To verify the grills operating fuel, remove the bottom drip pan and check serial number label on the left. Either LP or NG will be marked on the operating tab, indicating the proper operating fuel.
Attempting to convert Cal Flame grills from one fuel to another may result in serious injury and void the warranty coverage.
IMPORTANT: Never connect the grill to an unregulated gas supply.
The installation of this appliance must conform with local codes or, in the absence of local codes, to the national fuel gas code, ANSI
NATURAL Gas Connection: (Must be performed by a licensed contractor or local gas company representative). Ensure that the service supplying the grill is fitted with a shut off valve conveniently positioned to the grill and giving ease of access.
Your Cal Flame Grill for use with Natural Gas comes equipped with its own regulator which MUST NOT be removed. If, this regulator needs to be replaced use only the type specified by Cal Flame for this appliance.
1.Remove the rear panel from the BBQ to gain access to the regulator and gas connection point.
2.Connect a suitable flex connector to the grill regulator.
Page 39 | Owner’s Manual |
