Assembly and Installation

New Access Doors

1.Provide a cut out and a door jamb with inside dimensions as follows: 16 1/4" X 19 “ for a single door

28 1/4” x 19 3/8” for double doors

2.Secure the steel frame with 16 #10 x 1” truss head phillips screws.

3.Attach doors to frame.

4.Adjust doors as follows:

a.For height adjustment, loosen the two screws attached to each mounting plate.

b.Snap off hinge and secure mounting plate with #6 X 1” flat phillips screws.

c.For side adjustment, turn the screws to increase or decrease door overlay.

d.For depth adjustment, loosen screws, adjust the door to the desired position and retighten the screws.

 

Figure 21. Side burner installation

Barbecue Owner’s Manual

Page 17

12/17/04

www.calspas.com

Page 21
Image 21
Cal Flame G3000 owner manual New Access Doors