Operating Your Spa

NOTE: There is no control panel message displayed while in the standard heating mode; only the actual water temperature is displayed.

Some spa models are equipped with the exclusive XL Heat Exchanger™, the most efficient spa heater available anywhere. This highly innovative device heats water faster and more efficiently with no chemical build-up. For your protection, it includes a High Limit Overheat Protection safety device that prevents spa equipment from overheating. The XL Heat Exchanger™ works automatically and requires no maintenance.

Jets

Press the JETS button:

•Once to activate the low speed pump

•Twice to activate the high speed pump

•Three times to turn off the high-speed

Pump will automatically start at high speed for two seconds every time the pump speed changes from high to low.

Light

Press the LIGHT button to turn on the spa light and again to turn the light off.

Setting the Temperature Lock

This feature allows you to lock a temperature into the system. When engaged the set temperature will blink on and off when the TEMP button is pressed. However, you will not be able to change it until you unlock the set temperature:

•Press the TEMP button.

•Press the OPTION button to unlock the set temperature.

•Select a temperature with the TEMP button.

•Press the OPTION button to set and lock the temperature.

Automatic Time Outs

These features will automatically turn themselves off during periods of continuous use:

•

Low speed pump

After 30 minutes

•

High-speed pump

After 15 minutes

•

Spa light

After after 15 minute

2005 Spa Owner's Manual

Page 23

8/1/2005