Operating Your Spa

Button Functions

Every press will move the valve(s) one stop. The LED that is lit will move up (clockwise) to the next available position.

Every press will move the valve(s) one stop. The LED that is lit will move down (counter- clockwise) to the next available position.

This button moves the valve(s) to the most extreme positions. The first press will move the valve(s) and cause the LED to travel to the top (most clockwise) position. The next press will move the valve(s) in the other direction and the LED will move to the bottom (most counter-clockwise) position.

Pressing this button will center the valve(s) and the center LED will be lit.

Air Venturis

Air venturis are the smaller knobs located around the top of your spa. They can also be distinguished from diverter knobs by the arrows and the words “OFF”, “ON” and “AIR” marked on them (Figure 14). Each one will let you add a mixture of air with the jet pressure. This is accomplished by simply rotating the air venturi knob to the left (counter-clockwise) to increase the amount of airflow through the jets. To decrease the amount of airflow through the jets, simply rotate the handle to the right (clockwise).

Figure 14. Air Venturis

Adjustable Therapy System™

Spas equipped with the Adjustable Therapy System™ (ATS) allow you complete control of the therapy seat and/or lounger. This unique system offers convenient operation with its seat side controls, seven different massage modes, and a soothing demo mode -- all at the touch of a button (Figure 15).

Page 38

2005 Spa Owner's Manual

 

8/1/2005