Section 3. TLX106 Instrumentation Installation

If you received a telecommunications kit separate from the TLX106 Enclosure, follow the "Internal Installation" procedures outlined below.

3.3.1 Phone Modems

Phone modems enable communications between the TLX106 Enclosure and a Hayes compatible modem in your PC over a dedicated phone line. Phone line surge protection in built into the TLX106 Enclosure.

P/N 10588 Cable

RJ11 Patch

Ground

Modem

Cord

Wire

 

FIGURE 3.3-1. Phone Modem Mounting and Connections

3.3.1.1 Internal Installation

For installation inside the TLX106 Enclosure, the following components are provided in the phone modem kit:

(1)COM200 or COM300 Phone Modem

(1)12 inch RJ-11 Patch Cord

(1)Mounting Bracket

(4)Screws

(1)12 inch 14 AWG Ground Wire

Install the phone modem as shown in Figure 3.3-1.

1.Attach the modem to the modem bracket with the 4 screws provided. Mount the modem and bracket into the TLX106 Enclosure with the 3 pre- threaded screws on the mounting plate.

2.Connect the modem 9-pin port to the TLX106 Enclosure port with the P/N 10588 ribbon cable supplied with the TLX106 Enclosure.

3.Connect the modem RJ-ll jack to the TLX106 Enclosure RJ-11 jack with the RJ-ll patch cord.

4.Connect the modem ground port to the TLX106 Enclosure ground with the 14 AWG ground wire.

3-6