Section 1. Preparation and Siting
These guidelines apply to several Campbell Scientific weather stations.
1.1Installation tasks
1.1.1Indoors
•Immediately upon receipt of your shipment…
⇒Open shipping cartons.
⇒Check contents against invoice. Contact CSI immediately about any shortages.
•Several days prior to the planned installation date…
⇒Collect tools and site information (Section 1)
⇒Trial run the tower, assembling as much as possible (Section 2)
⇒Repackage equipment for transport to the field site
1.1.2Outdoors
•Locate suitable site (Section 1)
•Prepare tower (Section 2)
•TLX106 Stations:
⇒Place instrumentation enclosure low on the TLX106 Tower (Section 3)
⇒Install sensor option (Section 4)
⇒Slide enclosure to top of tower and secure with correct orientation (Section 3)
1.2Tools Required
Tools required to install and maintain a weather station are listed below.