KLVLW022, KLVLW023 | Candle GC32-9172-00 specs

	System Action: None.
	User Response: None.
	Severity: REPLY.
KLVLW022	RKLVLOG IS NOW RECORDING ON ddname
	Explanation: In response to a TLVLOG SWITCH request, CT/Engine has
	dynamically allocated a SYSOUT field and is now writing RKLVLOG messages to
	it. ddname is the new ddname.
	System Action: None.
	User Response: None.
	Severity: REPLY.
KLVLW023	ddname DD HAS BEEN CLOSED AND RELEASED
	Explanation: In response to a TLVLOG SWITCH request, CT/Engine has
	closed and dynamically deallocated the previous RKLVLOG file. ddname is the
	ddname.
	System Action: None.
	User Response: None.
	Severity: REPLY.
KLVLW027	COPIES MUST BE BETWEEN 1 AND 254
	Explanation: An invalid COPIES value was entered on a TLVLOG command.
	Only an integer between 1–254 is accepted.
	System Action: The command terminates.
	User Response: Reissue the command with a valid COPIES value.
	Severity: ERROR.
KLVLW028	MAXLINES MUST BE BETWEEN 0 AND 16000
	Explanation: An invalid MAXLINES value was entered on a TLVLOG
	command. Only an integer between 0–16000 is accepted.
	System Action: The command terminates.
	User Response: Reissue the command with a valid MAXLINES value.
	Severity: ERROR.
KLVLW029	HOLD VALUE MUST BE "YES" OR "NO"
	Explanation: An invalid HOLD value was entered on a TLVLOG command.
	Only YES or NO is accepted.
	System Action: The command terminates.
	User Response: Reissue the command with a valid HOLD value.
	Severity: ERROR.
KLVLW031	RKLVLOG SWITCH REQUESTED
	Explanation: A TLVLOG SWITCH request has been accepted. CT/Engine will
	allocate a new RKLVLOG SYSOUT file and begin recording on it, then close and
	release the old RKLVLOG file. This message is followed by KLVLW022 and
	KLVLW023, which report successful processing.
	System Action: None.
	User Response: None.
	Severity: REPLY.

18 Candle Products Messages Manual (KLVHS–KONCT)

Page 18

Image 18

Candle GC32-9172-00 manual KLVLW022, KLVLW023, KLVLW027 Copies Must be Between 1, KLVLW028 Maxlines Must be Between 0

GC32-9172-00 specifications

The Candle GC32-9172-00 is a state-of-the-art device that has gained significant recognition in the technology landscape due to its innovative features and exceptional performance. This product stands out for its ability to meet the demanding requirements of modern users, providing a seamless experience across various applications.

One of the foremost features of the GC32-9172-00 is its advanced processing power. Equipped with a high-performance processor, the device is designed to handle complex tasks efficiently, enabling users to run multiple applications simultaneously without experiencing slowdowns. This makes it particularly attractive for both professionals and enthusiasts who need reliability in performance.

In terms of connectivity, the GC32-9172-00 incorporates cutting-edge wireless technology, ensuring that users remain connected at all times. The device supports a range of wireless protocols, facilitating smooth communication with other gadgets and networks. Its robust connectivity options allow for quick data transfer, enhancing productivity and streamlining workflows.

The design of the Candle GC32-9172-00 is another highlight. With a sleek and modern aesthetic, it not only looks appealing but is also ergonomically crafted for user comfort. The user interface is intuitive and easy to navigate, making it accessible for individuals of all technical skill levels. The display is vibrant and responsive, providing an immersive experience whether used for work or entertainment.

Moreover, energy efficiency is a key characteristic of the GC32-9172-00. It utilizes advanced technologies to minimize power consumption while still delivering high performance. This eco-friendly approach not only helps reduce electricity bills but also supports sustainability initiatives, making it a responsible choice for environmentally conscious users.

Security features are paramount in today’s digital landscape, and the Candle GC32-9172-00 does not disappoint. It is equipped with top-notch security technology to safeguard user data and ensure privacy. With built-in encryption protocols and regular software updates, users can trust that their information is well-protected against potential threats.

In conclusion, the Candle GC32-9172-00 is a versatile and high-performing device that encapsulates the needs of today’s users. With its powerful processing capabilities, exceptional connectivity, ergonomic design, energy efficiency, and robust security features, it stands out as a preferred choice in the market. Whether for professional applications or personal use, the GC32-9172-00 exemplifies the perfect blend of technology and innovation.

Contents

Candle Products Messages Manual Volume Candle Products Messages Manual KLVHS-KONCT Contents Candle Products Messages Manual KLVHS-KONCT KLVHS005 Klvinhsm Rkanpar Parameters KLVHS001 Handle Services Manager Initialization CompleteKLVHS002 KLVHS006 KLVHS201 KLVHS203 Handle Services Manager Vector Table is InvalidKLVHS011 KLVHS202 No Handle Pools Available KLVHS205 Invalid Release Handle Request ErrorKLVHS811 Handle Services Manager Global Statistics Info KLVHS818 KLVHS821 Handle Services Manager Global Statistics DetailKLVHS817 KLVHS822 KLVHS830 KLVHS831 Handle Services Manager List Ownerid StatisticsKLVHS841 Handle Services Manager List Poolid Statistics KLVHS832 Handles KLVHS843KLVHS844 KLVHS845 KLVIC001 KLVHS854KLVHS855 KLVIC002 KLVIN000 KLVIN403 Command Library UnavailableKLVIN000 CT/IX Interface Initialized KLVIN001 KLVIN408 KLVIN406KLVIN407 Flushing Initial Messages KLVIN409 Initialization Library Unavailable KLVIN413 KLVIP003 Unsupported IPC ServiceKLVIN412 KLVIN414 KLVLR004 PURGE/CLEANUP Exit Error DETECTED, Dump Requested KLVLI001 Lock Manager Integrity ErrorKLVLR003 Logical Resource Integrity Error Alert KLVLW001 KLVLR006 Logical Resource Control Block ErrorKLVLR005 KLVLW002 KLVLW011 Dynamic Allocation Values KLVLW003KLVLW004 KLVLW012 KLVLW023 KLVLW031 Rklvlog Switch RequestedKLVLW022 KLVLW027 Copies Must be Between 1 KLVLW082 KLVLW041 Rklvlog Dataset Disabled by Permanent ErrorKLVLW081 KLVLW083 KLVNA002 KLVNA003 Database INACCESSIBLE, no Vsam LSR ResourcesKLVNA001 KLVNA004 KLVNA008 Klvinnam Rkanpar Parameters KLVNA006KLVNA007 KLVNA009 KLVNA014 KLVNA012KLVNA013 KLVNA015 KLVNA019 KLVNA017KLVNA018 KLVNA020 KLVNA023 KLVNA021KLVNA022 KLVNA031 KLVNA036 Control Point Options not Valid with VALIDATE= KLVNA034 Database Allocation Failed Resource ErrorKLVNA035 KLVNA037 KLVNA101 KLVNA102KLVNA103 KLVNA104 Current Password Expired CNTRLPTcntrlpt USERIDuseridNEW Password Invalid CNTRLPTcntrlpt USERIDuserid GROUPgroup TERMterminal APPLappl User not Defined to Group CNTRLPTcntrlpt USERIDuserid User Access Revoked CNTRLPTcntrlpt USERIDuseridKLVNA106 KLVNA107 KLVNA109 Group Access Revoked CNTRLPTcntrlpt USERIDuseridKLVNA108 Terminal not Authorized CNTRLPTcntrlpt USERIDuserid KLVNA111 KLVNA110Application not Authorized CNTRLPTcntrlpt USERIDuserid Operator not Authorized CNTRLPTcntrlpt KLVNA112 KLVNA113 KLVNA251 KLVNA114KLVNA151 KLVNA252 KLVNA255 KLVNA253 Resource List Build DISABLED, not APF AuthorizedKLVNA254 KLVNA256 Refresh of Resource Profiles Complete KLVOP002 KLVNT002KLVOP001 KLVOP003 KLVOP007 KLVOP005KLVOP006 KLVOP008 KLVOP023 KLVOP012 Active Resource ListKLVOP022 KLVOP024 KLVOP027 KLVOP025KLVOP026 KLVOP028 Confirmation not RECEIVED, Shutdown Bypassed KLVOP033 Time Interval Greater than 240000 Specified KLVOP032 Zero Interval not Allowed on Every CommandKLVOP031 KLVOP041 KLVOP052 KLVOP044KLVOP046 KLVOP053 IDoperator DEVdev PENDpendnum KLVOP111 KLVOP102KLVOP103 KLVOP112 KLVOP123 KLVOP124 Internal Trace Facility DisabledKLVOP122 KLVOP125 Trace Request REJECTED. Required Argument Missing Terminal KLVOP130 GTF Interface has not Been EnabledKLVOP129 KLVOP131 Trace Classinttermacbdlg Status KLVOP152 KLVOP142KLVOP143 KLVOP161 KLVOP183 Emulation Session Started KLVOP165KLVOP182 KLVOP184 For Autopurge KLVOP191KLVOP192 KLVOP193 KLVOP201 Anyappl Specified in a NON Dedicate Pool Ignored KLVOP194 Resource Name is RequiredKLVOP195 KLVOP202 KLVOP208 KLVOP205KLVOP207 KLVOP209 Sesslim Specified in a NON Dedicate Pool Ignored KLVOP290 KLVOP210 Nocappl Specified in a NON Dedicate Pool IgnoredKLVOP211 KLVOP291 KLVOP302 Viewlog Cluster not Available KLVOP303 Viewlog Cluster not AccessibleKLVOP314 Command Issued KLVOP304 KLVOP404 KLVOP402KLVOP403 Unable to Open JES Spool File KLVOP405 KLVOP552 KLVOP503 No Text Passed to the MVS CommandKLVOP502 KLVOP553 KLVOP651 KLVOP555KLVOP601 VPO Facility not Available KLVOP652 KLVOP657 KLVOP655KLVOP656 KLVOP658 KLVOP805 KLVOP803KLVOP804 KLVOP809 Print Request Accepted KLVOP855 KLVOP853KLVOP854 KLVOP856 KLVOP903 KLVOP901 NAM InactiveKLVOP902 KLVOP904 KLVOP910 KLVOP908KLVOP909 KLVOP911 User userid Defined date time KLVOP924 KLVOP922KLVOP923 KLVOP926 KLVOP953 KLVOP930KLVOP951 SCB Dump KLVOP960 KLVOP965 KLVOP963 Command ERROR, RTM Interface MAY be SET on or OFFKLVOP964 KLVOP966 KLVOP968 KLVOP972 GTF Interface DisabledKLVOP973 Command ERROR, GTF Interface MAY be SET on or OFF KLVOP969 KLVPA002 KLVOP975KLVPA001 KLVPA003 KLVPA006 No Valid Request Coded for Functionpds KLVPA004KLVPA005 KLVPA007 KLVPM003 KLVPM005 PSM Buffer Integrity ErrorKLVPM001 KLVPM010 KLVPM012 PSM Private Extension not Initialized Modname,attentioncode,fdbk, errordata,datastreamKLVPM011 KLVPM013 PSM ERP Info Block Pointer is Zero Candle Products Messages Manual KLVHS-KONCT KLVPM051 Klvinpsm Rkanpar Parameters KLVPM052LOG KLVPT001 KLVPM052KLVPM101 KLVRE001 Gcsdisks Refreshed KLVRE006 KLVRE004KLVRE005 KLVRE008 KLVRE009 Sense Code Table Refresh from dsnamemember resulttextUser Response Depends on resulttext KLVRS001 Invalid $RSS Request KLVRM004 Logical Resource Exit Stack Integrity ErrorKLVRT001 Parameter Error KLVRS002 Invalid RSS Release Request KLVRT014 Parameter Error KLVRT011 NPM Module Fnmnsi Requires APF AuthorizationKLVRT013 $STG Error KLVRT012 Unable to Load NPM Module Fnmnsi KLVRT021 KLVRT022 RTM NPM Vector ErrorKLVRT020 KLVRT023 RTM NPM NSI Address Space not Running KLVSC001 KLVRT030 $STG ErrorKLVRT031 Parameter Error KLVSC002 KLVSC006 KLVSC004KLVSC005 KLVSC007 Ambiguous Keyword Reference keyword KLVSC009 Invalid Time SpecificationKLVSC008 Environmentalinformation KLVSD002 Extended Main Storage Information SIZErange USEusecnt TOTALtotcnt ACCESSEDacccntKLVSD001 Primary Main Storage Information KLVSD003 Allocation Detail KLVSD006 KLVSD005LIMITstolim SLOPEsl SIZESrange TOTALtot FREEfree CARVEDcarved OVERHEADovhead KLVSD007 pp% is in USE tt% Allowed Threshold Exceeded Message Type Reply KLVSD031 Buffer Pool Information KLVSD021TMSnum PREFIXpfx CUSHIONcshn KLVSD032 KLVSD034 KLVSD033Buffers INUSEinuse MAXmax GETSgets FREESfrees Segments INUSEinuse MAXmax GETSgets FREESfrees Qq KLVSD102 Main Storage Scan Ended KLVSD039 END of Buffer Pool InformationKLVSD101 Main Storage Scan Started KLVSD103 NAME.... SIZElength TOTALcount KLVSD106 Insufficient Storage to Process CommandKLVSD104 KLVSD105 KLVSD107 KLVSD108 Storage Integrity ERROR. Scan TerminatedKLVSE051 Default Sense Code Table Defined KLVSE052 KLVSE057 KLVSE055 User Sense Code Table DefinedKLVSE056 KLVSE058 KLVSE062 KLVSE059 Sense Table TOO LARGE, IgnoredKLVSE061 KLVSE063 Klvinsns Rkanpar Parameters Rkanparklvinstg KLVSE064KLVSI001 KLVSI002 Parameters KLVSI022 Invalid Storage Class on Terminate Request KLVSI030 Control Block Error During GETKLVSI040 Control Block Error During Free KLVSI031 Invalid Storage Class During GET KLVSI051 Logic Error During USE/DROP KLVSI043 Storage Integrity ErrorKLVSI050 Control Block Error During USE/DROP KLVSI041 Zero Address on Free Request KLVSQ000 KLVSP001 $SPS Invocation or Internal ErrorKLVSP002 $SPS String Length Invalid Is in Effect KLVSS004 KLVSS002KLVSS003 KLVSS005 KLVST002 TSO Option Invalid for NON-TSO Address Space KLVST001 Candle Engine Initialization ERRORS, Abend U0012KLVST005 MVS Jobstep Authorization Required KLVST003 KLVST007 Bldvrp Failed for Vsam LSR Buffer POOL, RC=rc KLVST012 Extended Main Storage Unavailable KLVST014 Invalid Trace SpecificationKLVST016 Invalid Event Specification KLVST013 Extended Reserved Main Storage Unavailable KLVST019 Unable to Open Rklvsnap Dataset KLVST020 LIMIT/GRANULE Option Specification ErrorKLVST018 Unable to Open Rklvlog Dataset KLVST021 LOG Buffer Storage Unavailable KLVST025 Unable to Identify Subtask Entrypoint Transient Already Resident Relocation Error BldlKLVST024 Free Storage List Unavailable KLVST026 KLVST030 Unable to Determine CPU Identification KLVST028KLVST029 Invalid Value for Slope Parameter KLVST032 Percentage is Invalid in Quiesce Parameter KLVST037 Component KLVST038 Steplib Authorization RequiredKLVST036 Begin Vectors Differ from Previous Elements KLVST042 KLVST041 Error Initializing Sysmdump DatasetKLVST040 KLVST043 Unable to Open Rkanpar Dataset KLVTB003 KLVTB001KLVTB002 KLVTB004 KLVTB008 Unable to Read Table Database Control Record KLVTB007 Unable to Access Table ClusterKLVTB006 No LSR Pool Allocated KLVTB009 Unable to Write Table Database Control Record KLVTB014 KLVTB012KLVTB013 KLVTB015 KLVTB019 KLVTB017KLVTB018 KLVTB020 KLVTB022 KLVTB026 Unable to Access Table ClusterKLVTB021 KLVTB023 KLVTB029 KLVTB027KLVTB028 KLVTB030 KLVTB034 KLVTB032KLVTB033 KLVTB035 KLVTB036 KLVTB037KLVTB038 KLVTB041 Klvtbmgr Invalid Table Delete Pointer KLVTB040 Klvtbmgr Logic ErrorKLVTB039 KLVTB042 Free $TUB Integrity Check Failed KLVTB047 KLVTB045KLVTB046 KLVTB048 Invalid Erase Request Detected KLVTB052 Klvintb Rkanpar Parameters KLVTB049 Invalid RLB Chain DetectedKLVTB051 UNSUPPORTED/INVALID $TBHLP Request Received KLVTB053 KLVTQ102 KLVTI201 Invalid $STMX Request DetectedKLVTQ101 KLVTR001 Internal Trace Status KLVTR003 KLVTR004 Internal Trace Facility DisabledDisabled KLVTR005 KLVTR024 KLVTR026 GTF Interface has not Been EnabledKLVTR022 KLVTR025 KLVTR031 KLVTS001 Timer Already CancelledKLVTS011 Timer Association Vector Reuse KLVTR032 END of Trace Status KLVVL003 KLVVL001 Vsam Services not Available for ViewlogKLVVL002 KLVVL004 Unable to Reopen Viewlog Cluster KLVVL009 KLVVL007KLVVL008 KLVVL010 KLVVL014 Dsname or Ddname is Required for Viewlog KLVVL012KLVVL013 Rkanparklvinvlg is Empty KLVVL015 KLVVM002 KLVVL017KLVVM001 KLVVP000 KLVVP017 KLVVP014KLVVP015 Maxline Parameter not in RANGE1-255 KLVVP018 KLVVP022 KLVVP019KLVVP020 KLVVP023 KLVVP032 KLVVP034KLVVP035 KLVVP038 KLVVP036KLVVP037 Interrupted KLVVP300 KLVVP201 VPO TerminatedKLVVP202 VPO Terminating KLVVP301 KLVVP307 Actively Printing KLVVP305 Print Request Status FlagsKLVVP306 SESS-VPRTLOGGED-ON KLVVP308 Intervention Required Sent to Application KLVVP313 KLVVP311 Term Request Requires a Specified VprinterKLVVP312 KLVVP314 Vrpinter Request Token Contains Invalid Characters KLVVP402 KLVVP400KLVVP401 KLVVP403 KLVVP408 Retries Left ## KLVVP406 Retry in Progress YES/NOKLVVP407 No Retry Limit Specified KLVVP409 Alternate Physical Printer Attempted YES/NO KLVVP413 Outbound Limit Reached YES/NO KLVVP411 Session Honors Relreq YES/NOKLVVP412 Wait for DR from Physical Printer YES/NO KLVVP414 Immediate Physical Release Specified YES/NO KLVVP418 Maxline ### KLVVP416KLVVP417 Physical Printer OWNEDYES/NO KLVVP419 KLVVP424 KLVVP422KLVVP423 Physical Printer is Sysout YES/NO KLVVP425 KLVVP429 No Vprinters Defined KLVVP427KLVVP428 Sysout Ignore EOM YES/NO KLVVP430 Vprt and Pprt MAY not be Specified Together KLVVS002 KLVVS003KLVVS010 KLVVS012 KLVVS011Scheduled KLVVS013 Increase &$CCBSP$ WARN, ErrorKLVVS016 KLVVS017 KLVVS021 KLVVS026KLVVS031 KLVVS043 KLVVS041KLVVS042 KLVVS050 KLVVT001 KLVVS051KLVVS052 Invalid Klvvsstm Request KLVVT002 KLVVT015 KLVVT004 Vtam Access Method Support Vector ListKLVVT005 KLVVT021 Appl Request Retry KLVVT021 Exception Response Explanation An exception response was received by CT/EngineKLVVT021 Definite Response KLVVT021 RPL Exit Trace Enabled KLVVT021 Physical ErrorKLVVT021 API Exit Trace Enabled KLVVT021 Vtam Lerad Exit KLVVT061 KLVVT031KLVVT051 KLVVT062 KLVVT103 KLVVT101KLVVT102 KLVVT104 KLVVT108 KLVVT106KLVVT107 KLVVT109 KLVVT113 Klvinvtm Rkanpar Parameters KLVVT111Increase &$ARBSP$ KLVVT114 KLVVT503 Initialization Member Klvinvpo is Empty KLVVT251KLVVT501 Initialization Member Klvinvpo not Available KLVVT505 KLVVT508 KLVVT506KLVVT507 KLVVT509 VPO Applid is not Authorized AS a Program Operator KLVVT513 KLVVT511KLVVT512 Klvinvpo Rkanpar Parameters KLVVT851 KLVVT903 CancelledKLVVT902 KLVVT904 Warn KLVVT953KLXCP001 KLXCP002 KLXIN001 Subsys Configuration content of memberSyntax Error msg text Explanation KLXIN003 TCP/IP Interface Initialized KLXIN003 TCP/ACCESS Interface Configuration CompleteKLXIN004 TCP/ACCESS Interface Initialization Bypassed KLXIN004 TCP/IP Interface not Opened RC9999 KLXIN008 KLXIN006KLXIN007 KLXIN009 Hpns Initapi Failed Rcffffffff ERRNO000003F3 Text in error KLXOP005 KLXOP004KLXOP004 TCP/IP’,SUBCMD,’ Completed Rc Hostname hostname KM2EXP00 Profile Export Completed Successfully KM2HDI80 CANSM2HD Terminated by Stop CommandKM2EXPFF Profile Export Failed KM2HDI00 Historical Data Interface Initialized KM2HDI99 CANSM2HD Failed KM2HDI99 Reason xxxx Session xxxxxxxx Handle KM2IMPFF Profile Import Failed KM2IMP00 Profile Import Completed Successfully KMC0010E Your request failed. Message format not valid KMC0011E Your request failed. Gets inhibited for the queue KMC0021E Your request failed. MQSeries object already exists KMC0023E Your request failed. MQSeries object in use KMC0024E Your request failed. MQSeries pageset errorKMC0022E Your request failed. MQSeries object damaged KMC0025E Your request failed. MQSeries pageset full KMC0028E Your request failed. MQSeries queue deleted KMC0029E Your request failed. MQSeries queue is full KMC0037E Your request failed. MQSeries security error Converted is not valid or not supported KMC0045E Your request failed. Unknown MQSeries queue name Attribute of the definition But it does not have a Usage attribute of Mqustransmission Is not valid SYSTEM.ADMIN.COMMAND.QUEUE for distributed platforms orSYSTEM.COMMAND.INPUT for MVS is large enough 194,304 KMC0097E Your request failed. MQSeries object name not valid KMC0104E Your request failed. MQSeries received data error KMC0101E Your request failed. MQSeries connection refusedKMC0103E Your request failed. MQSeries send failed Channel is in doubt To resolve the in-doubt state, or resolve the channel KMC0120E Your request failed. MQSeries channel name invalid Maximum length of the name depends on the environment User Response Specify a valid name for the message exit Channel types, but is not present User Response Specify the Connection Name for the channel NetBIOS SPXTCP Working correctly, at both ends On OS/2 Warp, Windows, and Windows NT, it is of the formMaximum length of the string is 128 characters KMC0153E Queue Manager is already a member of this cluster Queue Manager cannot be deleted because it is still active Queue Manager cannot be deleted by the Configuration AgentAt least at version 5.1 distributed platforms or 2.1 MVS Queue Manager could not be deleted KMC0166S Failure occurred in the MQSeries Dspmqfls command KMC0163E Your request to stop the Queue Manager failedKMC0164W MQSeries Queue Manager is already running Appropriate MQSeries System Administration Guide KMC0172E An error occurred processing the Setmqaut commandKMC0174E An invalid MQSeries command argument was detected More information KMC0175S An unexpected error occurred on a Setmqaut commandSetmqaut command Tandem NSK and AS/400, only one queue manager MVS only Command issued by the Configuration Agent failedIf the problem persists, call Candle Customer Support User Response Delete the defined storage class objects Communicate with the MQSeries command server MVS KMC0199E MQSeries object contains an invalid queue name @2 MQSeries channel name Can be used for naming all MQSeries objects is as follows KMC0204E Contents of the namelist are invalid Configuration User Response Correct the ’Through Queue Manager’ field SPX Names are restricted to a maximum of 8 characters in length Maximum of 12 characters in length For client connection channels to be used with OS/2 Warp Object, or the Appc side information data setType Chltype of Rcvr Windowsnt Represents a Windows NT application User Response Specify a valid harden backout property @3 @4 Name of an Initiation queue That is defined with Usage NormalManager Queue Usagexmitq Enabled That references the process on the Triggers settingsHas triggering enabled Usage=Normal KMC0257W Connected Queue Manager @1 does not exist Usagenormal Æmvs Windows NT, and DOS it also applies to OS/390 for defining Supporting SPXOnly on AIX KMC0287E Invalid maximum uncommitted messages value @2 Managers running on MVSThan or equal to zero, and less than or equal to For the Queue Manager Zero or greater than 999,999,999 999,999,999 Than or equal to zero, and less than or equal to 999,999,999 Manager. See the Maxmsgl parameter of the Alter Q 640,000 if the queue is on any other MQSeries platformOr channel KMC0312E Invalid autostart listener value KMC0316E Invalid autoconnect prototype resource group @2 KMC0314E Invalid Queue Manager autoconnect protocol @2KMC0315E Invalid autostart channel initiator value KMC0317E Invalid storage class name @2 KMC0321E Invalid authorization event KMC0320E Invalid page set id @2KMC0322E Invalid Dead Letter Queue @2 Is 1, and the maximum is Connected Queue Manager Sender Clusters that the sender is associated withAs a full repository for the cluster Cluster receiver channels that prevents duplicate names KMC0348E Invalid cluster name @2 KMC0349E Invalid cluster workload exit data @2 KMC0351E Invalid cluster namelist @2 KMC0352E Invalid default bindKMC0350E Invalid maximum cluster workload data length @2 KMC0353E Invalid network priority @2 KMC0361E Invalid default protocol for managed cluster KMC0356W MQSecure command queue @1 not foundKMC0357W MQSecure problem queue @1 not found KMC0362E Invalid full repository setting As 9,999 Channels page in the cluster Queue Manager’s settingsHave any defined connections to any full repositories Conflicts KMC0373E Invalid default priority %s MQSeries Version 2.1 for WindowsKMC0372E Invalid backout threshold %s KMC0375E Invalid maximum message length %s KMC0377E Invalid service interval %sKMC0374E Invalid channel name %s KMC0376E Invalid queue depth threshold %s KMC0381E Invalid storage class name %s KMC0382E Invalid configured system name %sKMC0380E Invalid retention interval %s Names are restricted to a maximum of 8 characters in length KMC0384E Invalid prototype name %s KMC0385E Invalid symbolic parameter listKMC0383E Invalid Queue Manager alias name %s That can be used for naming prototypes is as follows KMC0388E Invalid maximum open handles %s KMC0386E Invalid Queue Manager name %sKMC0387E Invalid trigger interval %s KMC0389E Invalid maximum uncommitted messages %s KMC0391E Invalid namelist name %s KMC0392E Invalid namelist KMC0395E Invalid sequence number wrap %s KMC0393E Invalid process name %sKMC0394E Invalid batch size %s KMC0396E Invalid trigger depth %s User Response Specify a valid name for the send exit Maximum of 8 characters in length KMC0412E Authorization events not allowed on this platformEvents cannot be enabled for Queue Managers running on MVS To a maximum of 8 characters in length KMC0418E Triggers not allowed for this version of MQSeries KMC0415E Mcatypethread not allowed on this platformKMC0416E Convertyes not allowed on this platform KMC0419E Invalid primary log quantity %s KM2EXPFF-KMCRCA002I KMC0430E Invalid network priority %s KMC0431E Indextype %s invalid for this version of MQSeriesManagers running on MVS Want to also disable connection authentication Keyposition service for the Oamdb fileService for the Oamdb file Period . Forward slash / Underscore Percent sign % KMC0447E Invalid application type %s KMC0451E Invalid autostart trigger monitor valueKMC0452E Invalid Qsgdisp value Order for you to specify a value other than Queue Manager KMC0454E Invalid Clusdisp valueKMC0456E Invalid Cfstruct value @2 Entry Is 12 charactersList Shared queue KMCRCA002I Candle WebSphere MQ Configuration Agent Starting UpBe interpreted Started System Action None User Response System Action The error is propagated to the calling module Parameter Error on Domain CALL. the Gate Being CalledWAS call. the Parameter in Error WAS KMQxx001E User’s Guide for MQSeries KMQCI108E KMQCI107E Invalid Minor CommandKMQCI110E Command not Supported KMQCI109E KMQCI117E KMQCI116I Validate Command Completed SuccessfullyKMQCI114E Unable to Load Domain Initialization Module KMQCI118E List Operand Missing KMQCI122E Sample Interval Time Missing KMQCI123I Perform Startmon Command Processed SuccessfullyKMQCI126I SET Group Command Processed Successfully KMQCI124W Monitoring Already Active KMQCI129E Inconsistent Parameters Specified for Status KMQCI130I SET Manager Command Processed SuccessfullyKMQCI128E Name or Subsys Parameter Required KMQCI131E Nickname Duplicates Existing Manager KMQCI136E Channel not Found KMQCI134E Duplicate Manager for StatusaddKMQCI135E Manager not Found KMQCI137E Duplicate Channel KMQCI144E Null Command Ignored KMQCI142I SET Channel Command Processed SuccessfullyKMQCI143I SET Queue Command Processed Successfully KMQCI139E Duplicate Queue Trace Head Node Initialization FAILED. RC=rc RSN=rs KMQCI149W Msgsecurity is Obsolete USE MsgaccessKMQCI146E KMQCI147E KMQCI152E Both Mgrname and Rmgrname Cannot be Specified KMQCI151I SET Rmanager Command Processed SuccessfullyKMQCI150E Rmanager Name Cannot be Generic KMQCI153W REMOTEQremotequeuename AGGRHISTaggregationsamples RETAINHISThistoricalaggregationvalue MSGACCESSparm ICYCLEintervalcycle HLQhighlevelqualifier MQ Manager managername in SETmanagernamemask is KMQCI311I KMQCI309IKMQCI310I KMQCI312I KMQCI316I KMQCI317WKMQCI318W Channelq channeleventqueue Eventqueuein or eventqueueout QmgrqQueuemanagereventqueue Perfmq performanceeventqueue MGRNAMEqueuemanagernamemask STATISTICSlevel QMGRmgrname2 KMQDI101E KMQCT129IKMQCT130I KMQDU102I KMQIT105I Omegamon for Websphere MQ Termination Complete KMQIT103EKMQIT104I Omegamon for Websphere MQ Termination Started KMQME102F Unable to Load Message Table Kmqamemt KMQMH104E KMQMH102EKMQMH103E Data Space Storage KMQMI103E KMQMI101EKMQMI102E KMQMI104I KMQMI109E KMQMI108I Channel and Queue Masks Reset by ServerKMQMI107I KMQMI110E KMQMI114I KMQMI112E Unable to Allocate Remote QueueKMQMI113E KMQMI115E KMQMI117I KMQMI116E MQ Manager Command Server not RespondingKMQMI119I Error Validating REPLY-TO Queue Manager KMQMI118I KMQMI124E KMQMI123E Correct Password has not Been ProvidedKMQMI122I KMQMI125I KMQMI132E KMQMI130EKMQMI131E KMQMI133E KMQMI140I Perform Shutdown is not Supported KMQMI138EKMQMI139I Perform Startup is not Supported KMQMI141E KMQMI148E KMQMI146EKMQMI147E Queue Ignored EXIST. SET Channel Ignored KMQMI153EKMQMI154E KMQMI155E KMQMI159E KMQMI158EIgnored KMQMI160E User Response Add a Perform Startmon command to the command There is no SET Manager command in the command fileMonitor a non-default queue manager CCC for MQSeries to start monitoring KMQMI171I KMQMI169E Environment Error Unable to Create ThreadKMQMI170E KMQMI172I KMQMI174I KMQMI175E Abend in Processevent InterceptedKMQMI178E KMQMI180E KMQMI181EKMQMI184E KMQMI193E KMQMI185ELost KMQMI194E KMQMI196I KMQMI197I Mqseries Manager Command Server is AvailableKMQMI195E KMQMI198I KMQMI203W KMQMI201W Failed to Notify Offline StatusKMQMI202I KMQMI204W KMQMI209E KMQMI208I Error LOG Monitoring Feature is Turned OFFKMQMI207W Group Must Specify Single Queue Name Candle Products Messages Manual KLVHS-KONCT KMQMQ105E Error Installing SMF HOOK. RC=rc REASON=rsKMQMQ104E BAD Return Code from SERVER. RC=rc KMQMQ108E KMQMQ106EKMQMQ107E KMQMQ109I KMQMQ115E KMQMQ113EKMQMQ114I KMQMQ116E Termination KMQMQ118E Unable to Obtain Common Storage for SRB DriverKMQMQ119I KMQMQ120E KMQMQ141E KMQMQ124IKMQMQ140W KMQMQ142E Open for Input by Another Application KMQMQ143EKMQMQ150W OPENINPUTCOUNT=X Completed KMQMQ203EKMQMQ204I KMQMQ206E KMQMQ212W KMQMQ210EKMQMQ211E Result in Incomplete Application Queue Statistics KMQMQ219E KMQMQ217EKMQMQ218E KMQMQ220E Storage in Order to Maintain System Integrity KMQMQ224E MQ Commands Cannot be Executed for Remote QmgrsKMQMQ223W KMQMQ225I KMQMQ233W KMQMQ229EKMQMQ232W Information Cannot be Collected SRBsrbname ABENDabendcode EPAentrypoint ADDRaddress KMQMQ244I KMQMQ242I QSG Monitor Disabled DUE to Zero QsgchkintervalKMQMQ243I KMQMQ245I KMQMQ403E aaaaaaaa No valid action specified KMQMQ401E aaaaaaaa Cics release must be at leastKMQMQ402E aaaaaaaa Unknown input method KMQMQ404E aaaaaaaa No transaction ID specified for Kmqamqci KMQMQ408W aaaaaaaa CCC for MQSeries already active in Cics KMQPD101E KMQMQ413IKMQMQ414W KMQRM104E KMQTR105E KMQTR103E BAD Return Code from NAME/TOKEN ServicesKMQTR104I KMQTR106E KMQTR114I KMQTR112IKMQTR113I KMQTR115E Trace Buffer could not be Written KMQVS103E KMQVS101EKMQVS102E KMQVS104E KMQW000W KMQW008E Not Allowed by MsgaccessKMQW009E Agent Timeout Occurred KMQW001I MSG PUT on Xmit Q Successful KMQW016E Syntax Error KMQW010E Not Allowed by Command OptionKMQW013I Command Accepted by MVS KMQW017E Command Failed KMVCCC001E Unable to Locate Kmvccc Global Area KMQW018E Not Allowed by SecurityKMQW019E Not Supported by Platform KMVCCC002E Invalid Status Item Name in Getattribute Request KMVCCC005E Enterprise Object not Found KMVCCC008E Internal Thread Dispatch ErrorKMVCCC004E KMVCCC006E Enterprise Object is not Valid KMVCCC011E Unable to Initialize SDM Interface KMVCCC010E Unable to Initialize Kmvccc Service QueueKMVCCC013I Kmvccc Service Thread Shutting Down KMVCCC012I EIB Change Thread Shutting Down KMVCCC018E Unable to Initialize EIB Change Thread KMVCCC016E Unable to Initialize Situation Status ThreadKMVCCC017E Unable to Attach Situation Status Thread KMVCCC019E Unable to Attach EIB Change Thread KMVCCC025E EnabledKMVCCC024E KMVCCC026E KMVCCC032I Kmvccc Shutdown Complete KMVCCC036E Unable to Attach SDM Service ThreadKMVCCC031I Kmvccc Support Initialization is Complete KMVCCC033E KMVCCC040E KMVCCC038EKMVCCC039E KMVCCC041E Request, requestcode KMVCCC053E No Children Found for the Enterprise KMVCCC051EKMVCCC052E KMVCCC054E Abend Detected in Thread Routine KMVCCC060E KMVCCC058EKMVCCC059W Attribute Name Translation Cannot be Performed KMVCCC100E Unable to Open Ddname Rkandatv Opendir KMVCCC105W KMVCCC103IKMVCCC104I KMVCCC106I KMVCCC110I KMVCCC108IKMVCCC109W KMVCCC111E Unable to Allocate Attribute Entry KMVCCC120W KMVCCC118EKMVCCC119E KMVCCC121E KMVCCC126E Unable to Allocate Attribute Enumeration KMVCCC127E Unable to Allocate Command Node EntryKMVCCC125E Unable to Allocate Node Status KMVCCC128E Unable to Allocate Node List KMVCCC133E KMVCCC131EKMVCCC132E KMVCCC134E MODULEerrormodule RCreturncode SCsensecode User Response Check the Omegamon II for Vtam Configuration MODULEerrormodule RCreturncode Failed MODULEerrormodule RCreturncode RCreturncode SCsensecodeSCsensecode Trace Cleanup Detected AN Abend Condition Additional Error Encountered During Trace CleanupUnable to Freemain Userwork During Session Termination KN3AF046 Error Encountered Removing Trace Facility DuringSession Termination MODULEerrormodule RCreturncode KN3AF047 User Session Terminated RCreturncode SCsensecode KN3AF052 Unable to Access Rkanpar MODULEerrormodule KN3AF054 Error When Reading membername MODULEerrormodule KN3AF056 Allocating Dataset dsname KN3AF057 Control Record GET Failed for DDNAMEddname KN3AF060 Vsam Logging Disabled MODULEerrormodule Reason KN3AF112 KN3AF110 Dialogfunction Unable to Obtain PassedKN3AF111 Dialogfunction NON-ZERO Return Code from NDM Call KN3AF114 KN3AFNM1 Unable to Buildlocatemodify Npbnsb for NDM Control Module KN3AFNSB Load FAILED. NCP StatisticsData not Available System Action NCP statistics information is not available Each ACT Cycle IntervalManager NDM task From Resource Topology Code NCP Statistics Data Collection DisabledMessage Type Internal or user error NCP statistics data from the NCP data manager NDM GENDATEgenerationdate GENTIMEgenerationtime GENDATEgenerationdate GENTIMEgenerationtime FailedRequest Failed for RESOURCEresourcename NPALUnpaluname NCP Topology Genlevel Mismatch for Interval KN3AF134NCP Topology not CREATED. will Retry Next ACT Cycle KN3AF136 KN3AXNPB Addnpb Function Failed RCreturncode Cleanup Requested NDM ACT Resource Cleanup in ProgressNDM ACT Resource Cleanup Complete NDM Task has Recycled Since Last INTERVAL. Resource KN3AFNMI NCP Data Manager Task not Installed KN3AF146KN3AF147 KN3AF151 Message Type KN3AF149KN3AF150 SMF Response Time Recording for NCP Resources is Inactive Topology Update Functions Initialization Failed NPALUnpaluname Failed RCreturncodeREASONreasoncode NCP Statistics Data not Available KN3AF157Topology Upate Functions Module KN3AFNUT Load Failed KN3AF161 MODULEmodule NON-ZERO Return Code from TCP/IP Call PSW=programstatusword, ROUTINE=programname Rregisternumber Rregisternumber registervalue TCP/IP Collector MIB Browser Memory Allocation Failed INFOinformationcode Snmp Manager Request Timed OUT TCP/IP Service Thread MIB Browser XmcsSnmp Manager has Terminated Initialization Complete TCP/IP Service Thread MIB Browser Xmcs Completed TCP/IP Service Thread MIB Browser Xmcs AbendedTCP/IP Service Thread MIB Browser Xmcs is Terminating Reason reasoncode TCP/IP functionname FAILED. ERRNO=errorcode KN3CT132 MIB Browser is not Active RC=retcode MODULEmodule KN3CT125KN3CT131 MIB Browser Initialization Failed RCretcode KN3CT201 KN3CT201 module Unable to Load Module module KN3CT205 KN3AITXB Required Parameter not Supplied for KN3APTXE KN3CT208 KN3AITXB Ezasmi Gethostname FailureKN3CT209 KN3AITXB Invalid Return Code from KN3APTXE KN3CT302 KN3AITDE Required SUB-ELEMENT Parameter Character String not Found Vtam Command ErrorFind Requires String Locate Requires String Must be Numeric Invalid SelectionSampling Interval WAS TOO LONG, TRY Again Type a / Next to the Desired Selections User Commands UpdatedCollection Interval Timeout Data Reinitialized Selection not Available Variable Named varname Contains contentsofvarname Dialog Error Invalid CommandRequest Successful Resources Added Threshold Criteria UpdatedSelect the Actions PULL-DOWN Menu Field is Required Global Options Update Failed Global Options UpdatedThreshold Update Failed Invalid Numeric Range OFF, or a Numeric Value from 10-3600 Seconds ETE Interface DisabledOperand for the Autorefresh Command Must be on Must be in the Range of 15-360 Minutes CANDLE.ON.V500.SASCNTLKN3CLST6 SAS Clist WAS not Entered in the Correct FormatPlease USE the Following Format SAS Clist Dataset Name Specified Cannot be Located Monitoring Thresholds Changed Monitoring StartedMonitoring Stopped Monitoring Thresholds Deleted Terminal Options Updated Monitor Options Update ErrorMonitor Options Updated Autorefresh Options Updated SMF Definition Deleted SMF Definition AddedSMF Definition Changed Response Time Must be Greater then Previous Range User Authority Changed AT Least 1 Administrator is RequiredNot Allowed to Delete the only Administrator User Authority Deleted Light PEN is not Supported Navigation not AllowedNEW Rachsrt Parameter is not Prime Trace Already Active or Completed Close Failed for Sysout Dataset GET Failed for Default Printer OptionsTrace is not Active No Screen Prints Were Requested Open Failed for Sysout Dataset Allocate Failed for Sysout DatasetADD Failed for Screen Print LOG PUT Failed for Sysout Dataset Trace ABENDED, Data Still Good Printer Options UpdatedERROR, see Viewlog LU not Found TREND/EXCEPTION LOG File Access Error Following Error Occurred When Omegamon AttemptedTo Access the Specified SAS Print Options LIBRARY. Return ETE Started Task is not Available AN Unexpected Error Occurred Options Pulldown Panel are not VALID. Please UpdateHistorical Graph Options Before Attempting to Access Requested PIU WAS not Found Enter a Numeric Value or Leave Blank Enter YES or noEnter C or W Critical Must be Greater than Warning Categories Selection is only Valid for the IO00 Buffer PoolDomain View Command Invalid When Displaying Directory Alphanumeric Field RequiredEnter N or S Following Reasons Control Block Cannot be Accessed for ONEAN Attempt to Access the Address Space Failed Control Block is no Longer Valid INSTEAD. Most of the Data from the Original RPL can be Tuning Statistics are not ActiveUnable to Find the Actual RPL. the Crpl is Displayed Found in the Crpl Resource Trace not StartedNot Valid for GROUPS. USE List L and Select AN Individual Resource not Found Resource has no Sessions Specify Either Resource Name or Network AddressRPL Data is only Available for Applid Resources Vtam Replaceable Constants Module Istracon is not Enter N, L, P, or U Storage Required for Modelling not AVAILABLE. EnsureThat LIMIT23,X is Coded for the Startup Parameter Enter M or C Select only ONE Resource with Mark Enter P or UResources Must be the Same Type Select only ONE Resource with Copy Resource has NPACOLL=NO and Cannot be Monitored Resource has no Subordinate ResourcesResource has Already Been Started Resource is not Active to Vtam and Cannot be Monitored Resource Already Using Site Default Options Monitor Options will be Updated with the Current SiteDefaults No Exceptions are Generated for this Field Resources Already Added Resource Must be AN LU or TerminalNo Subordinate Resources are Being Monitored Resource Must be Stopped Before Monitoring Options can Subordinate Resources Must be Stopped Before this No Update AUTHORIZATION, View onlyGroup Description Already Exists Resource can be Stopped NCP Topology Update Interval Must be Greater than Resources has Been DisabledNCP Trend Recording Disabled AT Startup Enter M or H No LUS Associated with Resource Update SuccessfulInvalid Scroll Amount Address Space Name Already Exists Buffer Pool Data not Available Update ErrorMust be Alphabetic Connection Number Required for Drop OID Name is Unknown TCP/IP Command ErrorAT Least ONE Entry is Required OID Number is Unknown KN3FCCMD Command Processing Complete HI Priority Connection not Defined KN3AYFCV not AVAILABLE. Install Option Required Fpon Component Functions Installation CompleteFpon Component Functions Installation Failed Sevt Vtam Environment Installation Complete Fpct Component Functions Installation CompleteFpct Component Functions Installation Failed Sevt Vtam Environment Installation Failed Sevt Vtam Environment Status Failed ROUTINE=KN3AHEV3 Semv MVS Environment Installation CompleteSemv MVS Environment Installation Failed Semv Vtam Environment Status Failed ROUTINE=KN3AHEM3 REASON=reasoncode RETURN=returncode Ndmt NCP Data Manager Task Start Failed Message Type User errorKN3FC055 ROUTINE=KN3AHNT1 REASON=reasoncode RETURN=returncode Status text Dbug Extended Diagnostics Mode Status Failed Tcpc TCP/IP Collector Installation Failed Tcpc TCP/IP Collector Start Failed ROUTINE=KN3ACTC1 Tcpc TCP/IP Collector Stop Failed ROUTINE=KN3ACTC2 Tcpc Status Command Failed ROUTINE=KN3ACTC3 KN3FC096 Initializing FTP Reporting Thread FTP Initialization CompleteFTP Initialization Failed to Load KN3INFT2 CSA Monitor Ended Error Freeing CSAOverride Value Accepted Bytes CSA No Jobname Found Error Loading LlllllIncrease Bufmax AND/OR Reduce Collectinterval CSA Freed Error Obtaining CSA Error Freeing CSAError RE-LOADING Llllll Recovering from Already Added Exit Added SMF Exits Error Freeing CSA Copy of RecordAdding SMF Exits Deleting SMF Exits No Unprocessed SMF Records Initializing Cleanup ThreadTable Cleanup Running Omegamon FTP Agent Resource Manager Entered Invalid ROW Pointer Error no Eyecatcher in CSAResource Manager Started IRA Subnode Registration Thread is Active Tcpncpvtam Monitor Subnode Registered for Originnode Tcpncpvtam Monitor Subnode Deregistered for KN3IR906 IRA Manager command operand missing KN3IR904 Pthreaddetach errorKN3IR905 IRA Manager command unknown KN3IR908 IRASubnodeRegister error RC=xx Node=ccccccccccccc IRA Subnode Registration Thread is not Active IRA Subnode Registration Thread is not RespondingIRA Subnode Registration Thread Currently Active KN3IR916 $SCAN Error Parsing cccccccc ROUTINE=cccccccc R0=hhhhhhhh R1=hhhhhhhh ROUTINE=routineKN3IR919 TCP Monitor Start Failed for Originnode originnode KN3IR922 TCP Monitor Stop Failed for Originnode originnode KN3IR924 IRA Subnode Deregistration Failed ROUTINE=ccccccccKN3IR926 TCP Monitor Collection Failed MACROcccccccc macro KN3LC102 Appc Request Error appcrequest ROUTINE=routinename KN3LC101 Collector Applid applid UNAVAILABLE, NDM Task willTerminate KN3LC104 Missing KN3AYLCA Work Area ROUTINE=routinename KN3LC107 SQL Request ERROR, ROUTINE=routine-nameKN3LC109 KN3AYNCE Select Count Error ROUTINE=routinename KN3LC108 Failure to Acquire Storage for storagearea KN3LC112 Connection Failure Acbname localid KN3LC110 Appc Client Services Abend CODE=abendcode PSW=pswKN3LC111 KN3LS101 RETURN=returncode REASON=reasoncode ROUTINE=routinename RETURN=returncode REASON=reasoncode KN3LS112 Lucs Services Abend CODE=abendcode PSW=psw KN3LS110 Invalid Resource Count Error ROUTINE=routinenameKN3LS111 KN3AYWKG Chain Error ROUTINE=routinename KN3LS114 Connection Failure Using Acbname applid NCP Statistics Collector Available for Requests NCP Statistics Collector is Terminating Npaluname REASON=reasoncode Load Failed KN3ND015 $PAM$PAMname Failed ROUTINE=KN3AHN04 DDNAME=KN3RRT R1=returncode R15=registervalueResourcename NPALU=npaluname R15=returncode R0=returncode R1=returncode RRTname MEMBER=membername R15=registervalue R0=registervalueR1=registervalue Ddname KN3RRT Network Topology Error in Locate Function During Topology for DeletionDuring functioncall. Found Label NCPsourcelabel NCP will not be Monitored Is not SpecifiedCurrent Topology NCP Data Manager Task Available for Requests NCP Data Manager Task Termination Complete NCP Data Manager Task is TerminatingPSW=programstatusword ROUTINE=routinename NCP Data Manager Task Initialization Failed RETURN=returncode KN3ND108 SQL Resource Allocation Failed RETURN=returncodeSENSE=sensecode SENSE=sensecode KN3AYNRE RDS Segment Allocation Failed KN3AYNRE Header Allocation FailedKN3AYNCE Allocation Failed Resourcename failed KN3ND130 KN3AGNPB Service Function ABENDED, CODE=abendcodeNCP data manager task request fails System Action The NCP data manager task request fails KN3AGNPB no Hash Table Address Found in the ACT Work Ndmt Service Request FailedKN3AGNPB Entered for AN Invalid Function Area KN3AGFPF Floating Point Function Failed REASON=ABEND CODE=abendcodeOWNER=ownername,RETURN=hexreturncode Errors Detected During X.25 Resource Scanning for Genpunam Errors DetectedGenlunam Errors Detected KN3AGNTS Labeltypetab Appc Environment not Initialized Appc Environment Termination FailedACT Started Successfully Omegamon II for Vtam V500 Initialization Error ETE Connected SuccessfullyRCreturncode USERWORKuserworkareaaddress textstring KN3PN008 Logon Error Encountered for User userid FunctionKN3PN012 Table Service Error in Dialog callingdialog KN3PN011 KN3PN017 KN3PN015 Engine Services Error in Dialog callingdialogKN3PN016 Error in Dialog errordialog LUluname APPLapplid V500 Product Conversion Complete Omegamon II for Vtam V500 Initialization Failure Invalid Authorization FailedOmegamon II for Vtam V500 Initialization Failure APF Vtam Level Detected Security Enabled Omegamon II for Vtam V500 Initialization FailureNCP Global Options Table Conversion Complete SYSTERMSDMluname REFRESHSDMrefreshinterval Security EnabledSESSIONSDMsessionname SDMAPPLSDMapplid TRIGGERSDMhotkey KO41031 Situation &1 is true KN3SD003Enhanced Original Zoom Activated Severity System Programmer ResponseNo Severity KO41039 Error in request &1. Status &2. Reason &3KO41034 Monitoring for situation &1 ended KO41035 Object &1 changed by &2 KO41042 is written to the log Be numeric User Response Change the compare value & 2 to a numeric Another KO48010 Policy &1 started Before it finishes runningKO48071 Policy &1 activated KO48080 Ranking group &1 updated by &2 KO48078 Policy &1 updated by &2KO48079 Activity &1 in policy &2 updated by &3 KO48073 Policy &2, activity &1 has started User KO48092 Changing job queue for job &1 job number &2 to &3 KO48090 Policy &1 has deactivated. Restart limit exceededKO48091 Changing priority for job &1 job number &2 to &3 KO48093 Changing time slice for job &1 job number &2 to &3 KO48112 Holding job &1 job number &2 KO48106 Ending job &1 job number &2KO48110 Policy &2, activity &3 Evaluating situation &1 KO48119 Releasing job &1 job number &2 KO48148 Policy &2, activity &3 Waiting for &1 seconds KO48150 Policy &2, activity &3 Running policy &1KO48152 Situation &1 could not find message queue &2 KO49016 Situation &1 imbedded in policy &2. Not deleted KO49017 Policy &1 imbedded in policy &2. Not deletedKO49019 Candle Management Server CMS log not displayed Severity System Programmer ResponseNo Be used Candle Management Server CMS again Severity System Programmer ResponseImmediate KO4SRV003 KO4SRV001KO4SRV002 KO4SRV004 KO4SRV007 KO4SRV005KO4SRV006 KO4SRV008 KO4SRV020 KO4SRV018KO4SRV019 KO4SRV021 KO4SRV032 KO4SRV030KO4SRV031 KO4SRV033 KO4SRV041 KO4SRV039KO4SRV040 KO4SRV042 KO4SRV051 KO4SRV049KO4SRV050 KO4SRV052 KO4SRV056 KO4SRV054KO4SRV055 KO4SRV057 KO4SRV063 KO4SRV061KO4SRV062 KO4SRV064 KO4SRV070 KO4SRV068KO4SRV069 KO4SRV071 KO4SRV076 KO4SRV074KO4SRV075 KO4SRV077 KO4SRV082 KO4SRV080KO4SRV081 KO4SRV083 KO4SRV091 KO4SRV089KO4SRV090 KO4SRV092 KO4SRV098 KO4SRV096KO4SRV097 KO4SRV099 KO4SRV105 KO4SRV103KO4SRV104 KO4SRV106 KOCJO003 Interface Shutdown Completed KOCJO001 Initialize Completed NormallyKOCJO002 Interface Shutdown Requested KOCJO004 Interface Suspend Requested KOCJO009 KOCPLT00 not LOCATED. Check Linkedit KOCJO012 Journal Number ErrorKOCJO008 Unable to Determine Start Type KOCJO010 Failure in Cics Inquire KOCJO019 Exit Extract Error KOCJO016 Journal Open ErrorKOCJO018 Exit Enable Error KOCJO014 Suspend Transaction Inactive KOCJO021 Exit Start Failure KOCJO024 Exit Disable FailureKOCJO020 Getmain Failure KOCJO022 Exit Stop Failure KOCJO028 Initialize is Already in Process KOCJO026 Transaction Start FailureKOCJO027 Interface Inactive KOCJO029 Resume is Already in Process KOCJO037 Error Received During Wait Processing KOCJO033 Error Occurred During Cleanup DisableKOCJO034 Error Occurred During Cleanup Freemain KOCJO032 Unknown Function in Process KOCJO040 Interface Transaction has Abended KOCJO038 Error Received During Freemain ProcessingKOCJO039 Journal Write Failure KOCJO041 Rtype not Present in Dictionary KOCJO044 Netname not Present in Dictionary KOCJO045 Uowid not Present in DictionaryKOCJO046 Omegbsc not Present in Dictionary Candle Products Messages Manual KLVHS-KONCT KOGCM003 KOGCM001KOGCM002 KOGCM004 KOGDF006 KOGCM005KOGDF005 KOGDF007 KOGEC001 No Session Specified Sessid omittedKOGEC002 Specified Session not Defined to Povi KOGEC005 KOGEC003KOGEC004 KOGEC006 KOGEC010 KOGEC008KOGEC009 KOGEC011 KOGEC015 KOGEC013KOGEC014 KOGEC016 KOGER002 KOGEC018KOGER001 Invalid Selection Code KOGEV001 KOGEX001 KOGEV004KOGEV005 KOGIN001 KOGLM005 KOGLM003KOGLM004 KOGMM001 KOGOP002 KOGOP000KOGOP001 KOGOP004 KOGRT006 KOGOP005KOGOP006 KOGRT009 KOGRU004 KOGRU002KOGRU003 KOGRU005 KOGRU013 KOGRU017 Testing PATH, PF12 PressedKOGRU012 KOGRU014 KOGRU020 KOGRU018KOGRU019 KOGST001 KOGTB003 KOGTB001KOGTB002 KOGTB004 KOGUT001 KOGTB007KOGTB009 KOGUT002 KOGUT007 KOGUT005KOGUT006 KOGUT009 KOGVL02I KOGUT012KOGVL00I KOGVL03S KOGVL07S KOGVL05S Unable to Determine SLU ApplidKOGVL06S Unable to Locate VU Server IPC Queue KOGVL08E KOGVL12S KOGVL10IKOGVL11S KOGVL13E KOGVL16E KOGVL14I Outbound LU0 PacketKOGVL15I KOGVL20I KOGVL23I KOGVL21IKOGVL22I KOGVL24I KOGVL27E KOGVL25EKOGVL26E KOGVL29E KOGVL31E KOGVL30EUnable to Terminate lrtype STATUS=status BAD pdutype CONTINUATION. SEQNO=seqno EXPECTED=eseqno KOGVL35I KOGVL33IKOGVL34I KOGVL36I KOGVL41E KOGVL38EKOGVL40E KOGVL99I KOGVS003 KOGVS001KOGVS002 KOGVS004 KOGVS03E KOGVS01EKOGVS02E KOGVS04I KOGVS10E KOGVS05EKOGVS06E KOGVS11I VU Server Shutdown in Progress KOGVS90S VU Server Initialization Failed KOGVS13IKOGVS20E KOGVS99I VU Server is Terminating Unable to Locate Parameters LRN=lrn Vupl TYPE=vupltype ContentsKOGVT10E KOGVT14I KOGVT19I KOGVT17WKOGVT18I KOGVT20I KOGVT24E KOGVT22EKOGVT23W KOGVT25I KOGVT28E KOGVT26IKOGVT27I KOGVT29E KOGVT33E KOGVT31IKOGVT32E KOGVT34E KOGVT36E KOGVT34IKOGVT35E KOGVT37E KOGVT99I VU Thread is Terminating KOGVT38EKOGVT40I KONAF001 Manager NDM functions module failed KONAF003 Background ETE Collector Terminated with ErrorKONAF004 ACT Terminated Abnormally KONAF006 Member Koncnmap Contains Invalid ACB Name MODULEerrormodule RCreturncode KONAF021 KONAF031KONAF041 KONAF044 Error Encountered During Trace Cleanup Capture Reader Codes MODULEerrormodule RCreturncodeKONAF045 KONAF048 KONAF046 Error Encountered Removing Trace Facility DuringKONAF047 KONAF050 KONAF053 KONAF051KONAF052 KONAF054 KONAF058 KONAF056KONAF057 KONAF059 KONAF060 KONAF061KONAF062 KONAF112 KONAF110KONAF111 KONAF113 KONAF116 KONAFNM1 Unable to Buildlocatemodify Npbnsb for KONAF115KONAFNM1 Unable to Locate Site Monitor Table tablename KONAF117 KONAF122 KONAF120KONAF121 KONAF123 KONAF126 KONAF127 NCP Statistics Data Collection DisabledKONAF125 KONAF128 KONAF132 KONAF130KONAF131 KONAF133 NCP Topology Genlevel Mismatch for Konaxnpb Addnpb Function Failed RCreturncode KONAF135KONAF136 KONAF137 KONAF138 KONAF140 NDM ACT Resource Cleanup in ProgressKONAF141 NDM ACT Resource Cleanup Complete Konaxnpb Gethash Function Failed RCreturncode KONAF145 KONAF146 Konafnmi NCP Data Manager Task not InstalledKONAF144 KONAF147 From the Konaxcrb macro KONAF148KONAF149 KONAF150 KONAF155 KONAF154 Topology Update Functions Initialization FailedKONAF153 KONAF156 KONAF160 KONAF158KONAF159 KONAF161 KONCT003 KONCT001 $INIT Failed for Main Thread LRNKONCT002 KONCT004 TCP/IP Statistics Collector is Terminating KONCT012 KONCT010KONCT011 KONCT013 KONCT051 KONCT015KONCT050 Snmp Manager has Terminated KONCT052 KONCT103 KONCT102 TCP/IP Service Thread MIB Browser Xmcs AbendedSupport Services. See message KONCT103 which follows KONCT110 KONCT121 TCP/IP Address Space Collector Failed KONCT112 $GMEM Failed for Command Output RecordKONCT113 $GMEM Failed for Command Param Structure KONCT122 KONCT132 KONCT125KONCT131 KONCT201 KONCT204 KONCT202KONCT203 KONCT206 KONCT210 KONCT208Konaptxe KONCT301 KONCT303 KONCT303 Konaitdd Invalid Element Parameter parm Candle Products Messages Manual KLVHS-KONCT

KLVLW022

RKLVLOG IS NOW RECORDING ON ddname

KLVLW023

ddname DD HAS BEEN CLOSED AND RELEASED

KLVLW027

COPIES MUST BE BETWEEN 1 AND 254

KLVLW028

MAXLINES MUST BE BETWEEN 0 AND 16000

KLVLW029

HOLD VALUE MUST BE "YES" OR "NO"

KLVLW031

RKLVLOG SWITCH REQUESTED

18 Candle Products Messages Manual (KLVHS–KONCT)

GC32-9172-00 specifications