Candle GC32-9172-00 manual KLVNA112, KLVNA113

KLVNA112	COMMAND NOT AUTHORIZED: CNTRLPT(cntrlpt) [OPERATOR(operator)]
	[COMMAND(command)] [TERM(terminal)] [APPL(appl)]
	Explanation: Security validation for the specified user failed when the network
	access manager (NAM) was called. The operator operator is not authorized to
	issue the specified command. Fields of interest are the control point name name
	cntrlpt, the operator ID operator, the command command, the terminal name
	terminal, and the application name name appl. The control point name cntrlpt
	may be in the form cntrlpt1-cntrlpt2, where cntrlpt1 refers to the control point
	used and cntrlpt2 to the control point requested. The message is logged to create
	an audit trail, but this can be overridden at start-up time.
	System Action: The command terminates. This message is installation
	specific. This message will appear with the use of an external security package.
	The operator command entered was not allowed by the external security
	package. This message will appear in RKLVLOG and may be seen at the terminal
	if the external security package has not passed a message back to NAM. If a
	message was passed back by the external security package, that message will be
	seen.
	User Response: If you are a user viewing this message on your screen, correct
	the command or validate the command. If the problem persists, contact your
	security administrator for the external security package.
	Message Type:	INFO, VIEW.
KLVNA113	PARAMETER REJECTED BY USER EXIT: CNTRLPT(cntrlpt)
	[OPERATOR(operator)] [COMMAND(command)] [TERM(terminal)]
	[APPL(appl)]
	Explanation: A NAM FIELDEXIT has determined that a NAM request field is
	not valid. The exit should have provided additional messages about the error.
	Fields of interest are the control point name name cntrlpt, the operator ID
	operator, the command command, the terminal name terminal, and the
	application name name appl. The control point name cntrlpt may be in the form
	cntrlpt1-cntrlpt2, where cntrlpt1 refers to the control point used and cntrlpt2 to the
	control point requested. The message is logged to create an audit trail, but this can
	be overridden at start-up time.
	System Action: The function is not completed. This message is installation
	specific, and may be generated for any NAM function. This message will appear
	in RKLVLOG.
	User Response: Contact your system programmer to determine why the
	installation exit has rejected the value.
	Message Type:	INFO, VIEW.

KLVHS001–KLVSC009 31