Candle GC32-9172-00 manual KLVSD005, LIMITstolim SLOPEsl SIZESrange TOTALtot, KLVSD006

	System Action:	None.
	User Response:	None.
	Message Type:	REPLY.
KLVSD005	LIMIT(stolim) SLOPE(sl) SIZES(range) TOTAL(tot)
	Explanation: This message appears in response to the CT/Engine STORAGE
	operator command and displays storage parameters about primary or extended.
	It follows KLVSD001 and KLVSD002, or KLVSD004 if DETAIL was requested.
	stolim	Specifies (in bytes) the size of the largest block that can be
		allocated.
	sl	A Candle-internal parameter.
	range	Specifies the number of storage areas.
	tot	Specifies (in kilobytes) the total amount of storage available to
		end-user applications and CT/Engine functions. Storage not
		included in this total is storage obtained during CT/Engine
		initialization for the following:
		resident load modules
		internal trace table
		ÆLogical Resource Table
		log buffers
		This storage is excluded from the tot field of the display because
		once allocated it remains allocated for the life of the address space.
	System Action:	None.
	User Response:	None.
	Message Type:	REPLY.
KLVSD006	FREE(free) CARVED(carved) OVERHEAD(ovhead)
	Explanation: This message appears in response to the CT/Engine STORAGE
	operator command and specifies additional information about primary and
	extended storage. It follows KLVSD005.
	free	Specifies (in kilobytes) the amount of storage available.
	carved	Specifies (in kilobytes) the amount of storage allocated for use in
		fulfilling storage requests.
	ovhead	Specifies (in bytes) the amount of storage used for storage control.
	System Action:	None.
	User Response:	None.
	Message Type:	REPLY.

80 Candle Products Messages Manual (KLVHS–KONCT)