Usage=Normal, Has triggering enabled, Enabled

KMC0247E	The remote queue @1 is not defined as USAGE(XMITQ) within the Queue
	Manager.
	Explanation: You defined a remote queue, but the transmit queue is empty and
	the remote manager name identifies a local queue which is defined with
	Usage=Normal.
	User Response: Specify the name of a local queue defined within this Queue
	Manager which is defined with Usage=Transmit for the remote manager name. If
	an application opens the local definition of a remote queue, the remote Queue
	Manager must not be blank or the name of the local Queue Manager. When the
	open occurs, if the transmit queue is blank there must be a local queue of this
	name, which is to be used as the transmission queue.
KMC0248W	The process is not referenced by a local or model queue within the
	Queue Manager.
	Explanation: The defined process will not be used because it is not referenced
	as the process name by a local or model queue within the Queue Manager.
	User Response: This message is only a warning. You can stop the message
	from appearing by defining a local or model queue within the Queue Manager
	that references the process on the Triggers settings page.
KMC0249E	The target queue not defined as local or remote queue within the Queue
	Manager.
	Explanation: The target queue name associated with this alias queue is not
	defined as a local or remote queue within the Queue Manager.
	User Response: Specify the name of a local or remote queue within the Queue
	Manager as the alias queue’s target queue.
KMC0250W	The process is not referenced by a queue with triggering enabled within
	the Queue Manager.
	Explanation: The defined process will not be used because it is not referenced
	as the process name by a local or model queue within the Queue Manager that
	has triggering enabled.
	User Response: This message is only a warning. You can stop the message
	from appearing by defining a local or model queue within the Queue Manager
	that references the process on the Triggers settings page and has triggering
	enabled.
KMC0251E	The name list contains entry @1 which is not defined as a queue on the
	Queue Manager.
	Explanation: An entry on the contents of the namelist is not defined as a queue
	within the Queue Manager.
	User Response: Ensure that each entry in the namelist contents identifies the
	name of a queue on the Queue Manager.

KM2EXPFF–KMCRCA002I 197

Page 197

Image 197

Candle GC32-9172-00 Usage=Normal, That references the process on the Triggers settings, Has triggering enabled, Enabled

GC32-9172-00 specifications

The Candle GC32-9172-00 is a state-of-the-art device that has gained significant recognition in the technology landscape due to its innovative features and exceptional performance. This product stands out for its ability to meet the demanding requirements of modern users, providing a seamless experience across various applications.

One of the foremost features of the GC32-9172-00 is its advanced processing power. Equipped with a high-performance processor, the device is designed to handle complex tasks efficiently, enabling users to run multiple applications simultaneously without experiencing slowdowns. This makes it particularly attractive for both professionals and enthusiasts who need reliability in performance.

In terms of connectivity, the GC32-9172-00 incorporates cutting-edge wireless technology, ensuring that users remain connected at all times. The device supports a range of wireless protocols, facilitating smooth communication with other gadgets and networks. Its robust connectivity options allow for quick data transfer, enhancing productivity and streamlining workflows.

The design of the Candle GC32-9172-00 is another highlight. With a sleek and modern aesthetic, it not only looks appealing but is also ergonomically crafted for user comfort. The user interface is intuitive and easy to navigate, making it accessible for individuals of all technical skill levels. The display is vibrant and responsive, providing an immersive experience whether used for work or entertainment.

Moreover, energy efficiency is a key characteristic of the GC32-9172-00. It utilizes advanced technologies to minimize power consumption while still delivering high performance. This eco-friendly approach not only helps reduce electricity bills but also supports sustainability initiatives, making it a responsible choice for environmentally conscious users.

Security features are paramount in today’s digital landscape, and the Candle GC32-9172-00 does not disappoint. It is equipped with top-notch security technology to safeguard user data and ensure privacy. With built-in encryption protocols and regular software updates, users can trust that their information is well-protected against potential threats.

In conclusion, the Candle GC32-9172-00 is a versatile and high-performing device that encapsulates the needs of today’s users. With its powerful processing capabilities, exceptional connectivity, ergonomic design, energy efficiency, and robust security features, it stands out as a preferred choice in the market. Whether for professional applications or personal use, the GC32-9172-00 exemplifies the perfect blend of technology and innovation.

Contents

Candle Products Messages Manual Volume Candle Products Messages Manual KLVHS-KONCT Contents Candle Products Messages Manual KLVHS-KONCT KLVHS002 KLVHS001 Handle Services Manager Initialization CompleteKLVHS005 Klvinhsm Rkanpar Parameters KLVHS006 KLVHS011 KLVHS203 Handle Services Manager Vector Table is InvalidKLVHS201 KLVHS202 No Handle Pools Available KLVHS811 Handle Services Manager Global Statistics ErrorKLVHS205 Invalid Release Handle Request Info KLVHS817 KLVHS821 Handle Services Manager Global Statistics DetailKLVHS818 KLVHS822 KLVHS841 Handle Services Manager List Poolid Statistics KLVHS831 Handle Services Manager List Ownerid StatisticsKLVHS830 KLVHS832 KLVHS844 KLVHS843Handles KLVHS845 KLVHS855 KLVHS854KLVIC001 KLVIC002 KLVIN000 CT/IX Interface Initialized KLVIN403 Command Library UnavailableKLVIN000 KLVIN001 KLVIN407 Flushing Initial Messages KLVIN406KLVIN408 KLVIN409 Initialization Library Unavailable KLVIN412 KLVIP003 Unsupported IPC ServiceKLVIN413 KLVIN414 KLVLR003 Logical Resource Integrity Error KLVLI001 Lock Manager Integrity ErrorKLVLR004 PURGE/CLEANUP Exit Error DETECTED, Dump Requested Alert KLVLR005 KLVLR006 Logical Resource Control Block ErrorKLVLW001 KLVLW002 KLVLW004 KLVLW003KLVLW011 Dynamic Allocation Values KLVLW012 KLVLW022 KLVLW031 Rklvlog Switch RequestedKLVLW023 KLVLW027 Copies Must be Between 1 KLVLW081 KLVLW041 Rklvlog Dataset Disabled by Permanent ErrorKLVLW082 KLVLW083 KLVNA001 KLVNA003 Database INACCESSIBLE, no Vsam LSR ResourcesKLVNA002 KLVNA004 KLVNA007 KLVNA006KLVNA008 Klvinnam Rkanpar Parameters KLVNA009 KLVNA013 KLVNA012KLVNA014 KLVNA015 KLVNA018 KLVNA017KLVNA019 KLVNA020 KLVNA022 KLVNA021KLVNA023 KLVNA031 KLVNA035 KLVNA034 Database Allocation Failed Resource ErrorKLVNA036 Control Point Options not Valid with VALIDATE= KLVNA037 KLVNA103 KLVNA101KLVNA102 NEW Password Invalid CNTRLPTcntrlpt USERIDuserid Current Password Expired CNTRLPTcntrlpt USERIDuseridKLVNA104 GROUPgroup TERMterminal APPLappl KLVNA106 User Access Revoked CNTRLPTcntrlpt USERIDuseridUser not Defined to Group CNTRLPTcntrlpt USERIDuserid KLVNA107 KLVNA108 Group Access Revoked CNTRLPTcntrlpt USERIDuseridKLVNA109 Terminal not Authorized CNTRLPTcntrlpt USERIDuserid Application not Authorized CNTRLPTcntrlpt USERIDuserid KLVNA110KLVNA111 Operator not Authorized CNTRLPTcntrlpt KLVNA113 KLVNA112 KLVNA151 KLVNA114KLVNA251 KLVNA252 KLVNA254 KLVNA253 Resource List Build DISABLED, not APF AuthorizedKLVNA255 KLVNA256 Refresh of Resource Profiles Complete KLVOP001 KLVNT002KLVOP002 KLVOP003 KLVOP006 KLVOP005KLVOP007 KLVOP008 KLVOP022 KLVOP012 Active Resource ListKLVOP023 KLVOP024 KLVOP026 KLVOP025KLVOP027 KLVOP028 Confirmation not RECEIVED, Shutdown Bypassed KLVOP031 KLVOP032 Zero Interval not Allowed on Every CommandKLVOP033 Time Interval Greater than 240000 Specified KLVOP041 KLVOP046 KLVOP044KLVOP052 KLVOP053 IDoperator DEVdev PENDpendnum KLVOP103 KLVOP102KLVOP111 KLVOP112 KLVOP122 KLVOP124 Internal Trace Facility DisabledKLVOP123 KLVOP125 Trace Request REJECTED. Required Argument Missing KLVOP129 KLVOP130 GTF Interface has not Been EnabledTerminal KLVOP131 Trace Classinttermacbdlg Status KLVOP143 KLVOP142KLVOP152 KLVOP161 KLVOP182 KLVOP165KLVOP183 Emulation Session Started KLVOP184 KLVOP192 KLVOP191For Autopurge KLVOP193 KLVOP195 KLVOP194 Resource Name is RequiredKLVOP201 Anyappl Specified in a NON Dedicate Pool Ignored KLVOP202 KLVOP207 KLVOP205KLVOP208 KLVOP209 Sesslim Specified in a NON Dedicate Pool Ignored KLVOP211 KLVOP210 Nocappl Specified in a NON Dedicate Pool IgnoredKLVOP290 KLVOP291 KLVOP314 Command Issued KLVOP303 Viewlog Cluster not AccessibleKLVOP302 Viewlog Cluster not Available KLVOP304 KLVOP403 Unable to Open JES Spool File KLVOP402KLVOP404 KLVOP405 KLVOP502 KLVOP503 No Text Passed to the MVS CommandKLVOP552 KLVOP553 KLVOP601 VPO Facility not Available KLVOP555KLVOP651 KLVOP652 KLVOP656 KLVOP655KLVOP657 KLVOP658 KLVOP804 KLVOP803KLVOP805 KLVOP809 Print Request Accepted KLVOP854 KLVOP853KLVOP855 KLVOP856 KLVOP902 KLVOP901 NAM InactiveKLVOP903 KLVOP904 KLVOP909 KLVOP908KLVOP910 KLVOP911 User userid Defined date time KLVOP923 KLVOP922KLVOP924 KLVOP926 KLVOP951 SCB Dump KLVOP930KLVOP953 KLVOP960 KLVOP964 KLVOP963 Command ERROR, RTM Interface MAY be SET on or OFFKLVOP965 KLVOP966 KLVOP973 Command ERROR, GTF Interface MAY be SET on or OFF KLVOP972 GTF Interface DisabledKLVOP968 KLVOP969 KLVPA001 KLVOP975KLVPA002 KLVPA003 KLVPA005 KLVPA004KLVPA006 No Valid Request Coded for Functionpds KLVPA007 KLVPM001 KLVPM005 PSM Buffer Integrity ErrorKLVPM003 KLVPM010 KLVPM011 Modname,attentioncode,fdbk, errordata,datastreamKLVPM012 PSM Private Extension not Initialized KLVPM013 PSM ERP Info Block Pointer is Zero Candle Products Messages Manual KLVHS-KONCT LOG KLVPM051 Klvinpsm Rkanpar ParametersKLVPM052 KLVPM101 KLVPM052KLVPT001 KLVRE001 Gcsdisks Refreshed KLVRE005 KLVRE004KLVRE006 KLVRE008 User Response Depends on resulttext KLVRE009Sense Code Table Refresh from dsnamemember resulttext KLVRT001 Parameter Error KLVRM004 Logical Resource Exit Stack Integrity ErrorKLVRS001 Invalid $RSS Request KLVRS002 Invalid RSS Release Request KLVRT013 $STG Error KLVRT011 NPM Module Fnmnsi Requires APF AuthorizationKLVRT014 Parameter Error KLVRT012 Unable to Load NPM Module Fnmnsi KLVRT020 KLVRT022 RTM NPM Vector ErrorKLVRT021 KLVRT023 RTM NPM NSI Address Space not Running KLVRT031 Parameter Error KLVRT030 $STG ErrorKLVSC001 KLVSC002 KLVSC005 KLVSC004KLVSC006 KLVSC007 KLVSC008 KLVSC009 Invalid Time SpecificationAmbiguous Keyword Reference keyword Environmentalinformation KLVSD001 Primary Main Storage Information SIZErange USEusecnt TOTALtotcnt ACCESSEDacccntKLVSD002 Extended Main Storage Information KLVSD003 Allocation Detail LIMITstolim SLOPEsl SIZESrange TOTALtot KLVSD005KLVSD006 FREEfree CARVEDcarved OVERHEADovhead Message Type Reply KLVSD007 pp% is in USE tt% Allowed Threshold Exceeded TMSnum PREFIXpfx CUSHIONcshn KLVSD021KLVSD031 Buffer Pool Information KLVSD032 Buffers INUSEinuse MAXmax GETSgets FREESfrees KLVSD033KLVSD034 Segments INUSEinuse MAXmax GETSgets FREESfrees Qq KLVSD101 Main Storage Scan Started KLVSD039 END of Buffer Pool InformationKLVSD102 Main Storage Scan Ended KLVSD103 KLVSD104 KLVSD106 Insufficient Storage to Process CommandNAME.... SIZElength TOTALcount KLVSD105 KLVSE051 Default Sense Code Table Defined KLVSD108 Storage Integrity ERROR. Scan TerminatedKLVSD107 KLVSE052 KLVSE056 KLVSE055 User Sense Code Table DefinedKLVSE057 KLVSE058 KLVSE061 KLVSE059 Sense Table TOO LARGE, IgnoredKLVSE062 KLVSE063 Klvinsns Rkanpar Parameters KLVSI001 KLVSE064Rkanparklvinstg KLVSI002 Parameters KLVSI040 Control Block Error During Free KLVSI030 Control Block Error During GETKLVSI022 Invalid Storage Class on Terminate Request KLVSI031 Invalid Storage Class During GET KLVSI050 Control Block Error During USE/DROP KLVSI043 Storage Integrity ErrorKLVSI051 Logic Error During USE/DROP KLVSI041 Zero Address on Free Request KLVSP002 $SPS String Length Invalid KLVSP001 $SPS Invocation or Internal ErrorKLVSQ000 Is in Effect KLVSS003 KLVSS002KLVSS004 KLVSS005 KLVST005 MVS Jobstep Authorization Required KLVST001 Candle Engine Initialization ERRORS, Abend U0012KLVST002 TSO Option Invalid for NON-TSO Address Space KLVST003 Bldvrp Failed for Vsam LSR Buffer POOL, RC=rc KLVST007 KLVST016 Invalid Event Specification KLVST014 Invalid Trace SpecificationKLVST012 Extended Main Storage Unavailable KLVST013 Extended Reserved Main Storage Unavailable KLVST018 Unable to Open Rklvlog Dataset KLVST020 LIMIT/GRANULE Option Specification ErrorKLVST019 Unable to Open Rklvsnap Dataset KLVST021 LOG Buffer Storage Unavailable KLVST024 Free Storage List Unavailable Transient Already Resident Relocation Error BldlKLVST025 Unable to Identify Subtask Entrypoint KLVST026 KLVST029 Invalid Value for Slope Parameter KLVST028KLVST030 Unable to Determine CPU Identification KLVST032 Percentage is Invalid in Quiesce Parameter KLVST036 KLVST038 Steplib Authorization RequiredKLVST037 Component Begin Vectors Differ from Previous Elements KLVST040 KLVST041 Error Initializing Sysmdump DatasetKLVST042 KLVST043 Unable to Open Rkanpar Dataset KLVTB002 KLVTB001KLVTB003 KLVTB004 KLVTB006 No LSR Pool Allocated KLVTB007 Unable to Access Table ClusterKLVTB008 Unable to Read Table Database Control Record KLVTB009 Unable to Write Table Database Control Record KLVTB013 KLVTB012KLVTB014 KLVTB015 KLVTB018 KLVTB017KLVTB019 KLVTB020 KLVTB021 KLVTB026 Unable to Access Table ClusterKLVTB022 KLVTB023 KLVTB028 KLVTB027KLVTB029 KLVTB030 KLVTB033 KLVTB032KLVTB034 KLVTB035 KLVTB038 KLVTB036KLVTB037 KLVTB039 KLVTB040 Klvtbmgr Logic ErrorKLVTB041 Klvtbmgr Invalid Table Delete Pointer KLVTB042 Free $TUB Integrity Check Failed KLVTB046 KLVTB045KLVTB047 KLVTB048 Invalid Erase Request Detected KLVTB051 UNSUPPORTED/INVALID $TBHLP Request Received KLVTB049 Invalid RLB Chain DetectedKLVTB052 Klvintb Rkanpar Parameters KLVTB053 KLVTQ101 KLVTI201 Invalid $STMX Request DetectedKLVTQ102 KLVTR001 Internal Trace Status Disabled KLVTR004 Internal Trace Facility DisabledKLVTR003 KLVTR005 KLVTR022 KLVTR026 GTF Interface has not Been EnabledKLVTR024 KLVTR025 KLVTS011 Timer Association Vector Reuse KLVTS001 Timer Already CancelledKLVTR031 KLVTR032 END of Trace Status KLVVL002 KLVVL001 Vsam Services not Available for ViewlogKLVVL003 KLVVL004 Unable to Reopen Viewlog Cluster KLVVL008 KLVVL007KLVVL009 KLVVL010 KLVVL013 Rkanparklvinvlg is Empty KLVVL012KLVVL014 Dsname or Ddname is Required for Viewlog KLVVL015 KLVVM001 KLVVL017KLVVM002 KLVVP000 KLVVP015 Maxline Parameter not in RANGE1-255 KLVVP014KLVVP017 KLVVP018 KLVVP020 KLVVP019KLVVP022 KLVVP023 KLVVP035 KLVVP032KLVVP034 KLVVP037 KLVVP036KLVVP038 Interrupted KLVVP202 VPO Terminating KLVVP201 VPO TerminatedKLVVP300 KLVVP301 KLVVP306 SESS-VPRTLOGGED-ON KLVVP305 Print Request Status FlagsKLVVP307 Actively Printing KLVVP308 Intervention Required Sent to Application KLVVP312 KLVVP311 Term Request Requires a Specified VprinterKLVVP313 KLVVP314 Vrpinter Request Token Contains Invalid Characters KLVVP401 KLVVP400KLVVP402 KLVVP403 KLVVP407 No Retry Limit Specified KLVVP406 Retry in Progress YES/NOKLVVP408 Retries Left ## KLVVP409 Alternate Physical Printer Attempted YES/NO KLVVP412 Wait for DR from Physical Printer YES/NO KLVVP411 Session Honors Relreq YES/NOKLVVP413 Outbound Limit Reached YES/NO KLVVP414 Immediate Physical Release Specified YES/NO KLVVP417 Physical Printer OWNEDYES/NO KLVVP416KLVVP418 Maxline ### KLVVP419 KLVVP423 Physical Printer is Sysout YES/NO KLVVP422KLVVP424 KLVVP425 KLVVP428 Sysout Ignore EOM YES/NO KLVVP427KLVVP429 No Vprinters Defined KLVVP430 Vprt and Pprt MAY not be Specified Together KLVVS010 KLVVS002KLVVS003 Scheduled KLVVS011KLVVS012 KLVVS013 KLVVS016 WARN, ErrorIncrease &$CCBSP$ KLVVS017 KLVVS031 KLVVS021KLVVS026 KLVVS042 KLVVS041KLVVS043 KLVVS050 KLVVS052 Invalid Klvvsstm Request KLVVS051KLVVT001 KLVVT002 KLVVT005 KLVVT004 Vtam Access Method Support Vector ListKLVVT015 KLVVT021 Request Retry Appl KLVVT021 Definite Response KLVVT021 Exception ResponseExplanation An exception response was received by CT/Engine KLVVT021 API Exit Trace Enabled KLVVT021 Physical ErrorKLVVT021 RPL Exit Trace Enabled KLVVT021 Vtam Lerad Exit KLVVT051 KLVVT031KLVVT061 KLVVT062 KLVVT102 KLVVT101KLVVT103 KLVVT104 KLVVT107 KLVVT106KLVVT108 KLVVT109 Increase &$ARBSP$ KLVVT111KLVVT113 Klvinvtm Rkanpar Parameters KLVVT114 KLVVT501 Initialization Member Klvinvpo not Available KLVVT251KLVVT503 Initialization Member Klvinvpo is Empty KLVVT505 KLVVT507 KLVVT506KLVVT508 KLVVT509 VPO Applid is not Authorized AS a Program Operator KLVVT512 Klvinvpo Rkanpar Parameters KLVVT511KLVVT513 KLVVT851 KLVVT902 CancelledKLVVT903 KLVVT904 KLXCP001 KLVVT953Warn KLXCP002 Syntax Error msg text Subsys Configuration content of memberKLXIN001 Explanation KLXIN004 TCP/ACCESS Interface Initialization Bypassed KLXIN003 TCP/ACCESS Interface Configuration CompleteKLXIN003 TCP/IP Interface Initialized KLXIN004 TCP/IP Interface not Opened RC9999 KLXIN007 KLXIN006KLXIN008 KLXIN009 Hpns Initapi Failed Rcffffffff ERRNO000003F3 Text in error KLXOP004 TCP/IP’,SUBCMD,’ Completed KLXOP004KLXOP005 Rc Hostname hostname KM2EXPFF Profile Export Failed KM2HDI80 CANSM2HD Terminated by Stop CommandKM2EXP00 Profile Export Completed Successfully KM2HDI00 Historical Data Interface Initialized KM2HDI99 Reason xxxx Session xxxxxxxx Handle KM2HDI99 CANSM2HD Failed KM2IMP00 Profile Import Completed Successfully KM2IMPFF Profile Import Failed KMC0011E Your request failed. Gets inhibited for the queue KMC0010E Your request failed. Message format not valid KMC0021E Your request failed. MQSeries object already exists KMC0022E Your request failed. MQSeries object damaged KMC0024E Your request failed. MQSeries pageset errorKMC0023E Your request failed. MQSeries object in use KMC0025E Your request failed. MQSeries pageset full KMC0029E Your request failed. MQSeries queue is full KMC0028E Your request failed. MQSeries queue deleted Converted is not valid or not supported KMC0037E Your request failed. MQSeries security error Attribute of the definition KMC0045E Your request failed. Unknown MQSeries queue name But it does not have a Usage attribute of Mqustransmission SYSTEM.COMMAND.INPUT for MVS is large enough SYSTEM.ADMIN.COMMAND.QUEUE for distributed platforms orIs not valid 194,304 KMC0097E Your request failed. MQSeries object name not valid KMC0103E Your request failed. MQSeries send failed KMC0104E Your request failed. MQSeries received data errorKMC0101E Your request failed. MQSeries connection refused To resolve the in-doubt state, or resolve the channel Channel is in doubt KMC0120E Your request failed. MQSeries channel name invalid User Response Specify a valid name for the message exit Maximum length of the name depends on the environment User Response Specify the Connection Name for the channel Channel types, but is not present TCP NetBIOSSPX Maximum length of the string is 128 characters Working correctly, at both endsOn OS/2 Warp, Windows, and Windows NT, it is of the form KMC0153E Queue Manager is already a member of this cluster At least at version 5.1 distributed platforms or 2.1 MVS Queue Manager cannot be deleted by the Configuration AgentQueue Manager cannot be deleted because it is still active Queue Manager could not be deleted KMC0164W MQSeries Queue Manager is already running KMC0166S Failure occurred in the MQSeries Dspmqfls commandKMC0163E Your request to stop the Queue Manager failed KMC0174E An invalid MQSeries command argument was detected Appropriate MQSeries System Administration GuideKMC0172E An error occurred processing the Setmqaut command Setmqaut command KMC0175S An unexpected error occurred on a Setmqaut commandMore information Tandem NSK and AS/400, only one queue manager If the problem persists, call Candle Customer Support Command issued by the Configuration Agent failedMVS only User Response Delete the defined storage class objects Communicate with the MQSeries command server MVS KMC0199E MQSeries object contains an invalid queue name @2 Can be used for naming all MQSeries objects is as follows MQSeries channel name KMC0204E Contents of the namelist are invalid User Response Correct the ’Through Queue Manager’ field Configuration SPX Maximum of 12 characters in length Names are restricted to a maximum of 8 characters in length Type Chltype of Rcvr For client connection channels to be used with OS/2 WarpObject, or the Appc side information data set User Response Specify a valid harden backout property Windowsnt Represents a Windows NT application @3 @4 Manager That is defined with Usage NormalName of an Initiation queue Queue Usagexmitq Has triggering enabled That references the process on the Triggers settingsEnabled Usage=Normal KMC0257W Connected Queue Manager @1 does not exist Usagenormal Æmvs Only on AIX Windows NT, and DOS it also applies to OS/390 for definingSupporting SPX Than or equal to zero, and less than or equal to Managers running on MVSKMC0287E Invalid maximum uncommitted messages value @2 For the Queue Manager 999,999,999 Zero or greater than 999,999,999 Than or equal to zero, and less than or equal to 999,999,999 Or channel 640,000 if the queue is on any other MQSeries platformManager. See the Maxmsgl parameter of the Alter Q KMC0312E Invalid autostart listener value KMC0315E Invalid autostart channel initiator value KMC0314E Invalid Queue Manager autoconnect protocol @2KMC0316E Invalid autoconnect prototype resource group @2 KMC0317E Invalid storage class name @2 KMC0322E Invalid Dead Letter Queue @2 KMC0321E Invalid authorization eventKMC0320E Invalid page set id @2 Is 1, and the maximum is Connected Queue Manager As a full repository for the cluster Clusters that the sender is associated withSender Cluster receiver channels that prevents duplicate names KMC0349E Invalid cluster workload exit data @2 KMC0348E Invalid cluster name @2 KMC0350E Invalid maximum cluster workload data length @2 KMC0352E Invalid default bindKMC0351E Invalid cluster namelist @2 KMC0353E Invalid network priority @2 KMC0357W MQSecure problem queue @1 not found KMC0356W MQSecure command queue @1 not foundKMC0361E Invalid default protocol for managed cluster KMC0362E Invalid full repository setting Have any defined connections to any full repositories Channels page in the cluster Queue Manager’s settingsAs 9,999 Conflicts KMC0372E Invalid backout threshold %s KMC0373E Invalid default priority %sMQSeries Version 2.1 for Windows KMC0374E Invalid channel name %s KMC0377E Invalid service interval %sKMC0375E Invalid maximum message length %s KMC0376E Invalid queue depth threshold %s KMC0380E Invalid retention interval %s KMC0382E Invalid configured system name %sKMC0381E Invalid storage class name %s Names are restricted to a maximum of 8 characters in length KMC0383E Invalid Queue Manager alias name %s KMC0385E Invalid symbolic parameter listKMC0384E Invalid prototype name %s That can be used for naming prototypes is as follows KMC0387E Invalid trigger interval %s KMC0386E Invalid Queue Manager name %sKMC0388E Invalid maximum open handles %s KMC0389E Invalid maximum uncommitted messages %s KMC0392E Invalid namelist KMC0391E Invalid namelist name %s KMC0394E Invalid batch size %s KMC0393E Invalid process name %sKMC0395E Invalid sequence number wrap %s KMC0396E Invalid trigger depth %s User Response Specify a valid name for the send exit Events cannot be enabled for Queue Managers running on MVS KMC0412E Authorization events not allowed on this platformMaximum of 8 characters in length To a maximum of 8 characters in length KMC0416E Convertyes not allowed on this platform KMC0415E Mcatypethread not allowed on this platformKMC0418E Triggers not allowed for this version of MQSeries KMC0419E Invalid primary log quantity %s KM2EXPFF-KMCRCA002I Managers running on MVS KMC0430E Invalid network priority %sKMC0431E Indextype %s invalid for this version of MQSeries Service for the Oamdb file Want to also disable connection authenticationKeyposition service for the Oamdb file Period . Forward slash / Underscore Percent sign % KMC0452E Invalid Qsgdisp value KMC0447E Invalid application type %sKMC0451E Invalid autostart trigger monitor value KMC0456E Invalid Cfstruct value @2 Order for you to specify a value other than Queue ManagerKMC0454E Invalid Clusdisp value List Is 12 charactersEntry Shared queue Be interpreted Candle WebSphere MQ Configuration Agent Starting UpKMCRCA002I Started System Action None User Response WAS call. the Parameter in Error WAS Parameter Error on Domain CALL. the Gate Being CalledSystem Action The error is propagated to the calling module KMQxx001E User’s Guide for MQSeries KMQCI110E Command not Supported KMQCI107E Invalid Minor CommandKMQCI108E KMQCI109E KMQCI114E Unable to Load Domain Initialization Module KMQCI116I Validate Command Completed SuccessfullyKMQCI117E KMQCI118E List Operand Missing KMQCI126I SET Group Command Processed Successfully KMQCI123I Perform Startmon Command Processed SuccessfullyKMQCI122E Sample Interval Time Missing KMQCI124W Monitoring Already Active KMQCI128E Name or Subsys Parameter Required KMQCI130I SET Manager Command Processed SuccessfullyKMQCI129E Inconsistent Parameters Specified for Status KMQCI131E Nickname Duplicates Existing Manager KMQCI135E Manager not Found KMQCI134E Duplicate Manager for StatusaddKMQCI136E Channel not Found KMQCI137E Duplicate Channel KMQCI143I SET Queue Command Processed Successfully KMQCI142I SET Channel Command Processed SuccessfullyKMQCI144E Null Command Ignored KMQCI139E Duplicate Queue KMQCI146E KMQCI149W Msgsecurity is Obsolete USE MsgaccessTrace Head Node Initialization FAILED. RC=rc RSN=rs KMQCI147E KMQCI150E Rmanager Name Cannot be Generic KMQCI151I SET Rmanager Command Processed SuccessfullyKMQCI152E Both Mgrname and Rmgrname Cannot be Specified KMQCI153W RETAINHISThistoricalaggregationvalue REMOTEQremotequeuename AGGRHISTaggregationsamples MQ Manager managername in SETmanagernamemask is MSGACCESSparm ICYCLEintervalcycle HLQhighlevelqualifier KMQCI310I KMQCI309IKMQCI311I KMQCI312I KMQCI318W KMQCI316IKMQCI317W Queuemanagereventqueue Perfmq performanceeventqueue Eventqueuein or eventqueueout QmgrqChannelq channeleventqueue MGRNAMEqueuemanagernamemask STATISTICSlevel QMGRmgrname2 KMQCT130I KMQCT129IKMQDI101E KMQDU102I KMQIT104I Omegamon for Websphere MQ Termination Started KMQIT103EKMQIT105I Omegamon for Websphere MQ Termination Complete KMQME102F Unable to Load Message Table Kmqamemt KMQMH103E KMQMH102EKMQMH104E Data Space Storage KMQMI102E KMQMI101EKMQMI103E KMQMI104I KMQMI107I KMQMI108I Channel and Queue Masks Reset by ServerKMQMI109E KMQMI110E KMQMI113E KMQMI112E Unable to Allocate Remote QueueKMQMI114I KMQMI115E KMQMI119I Error Validating REPLY-TO Queue Manager KMQMI116E MQ Manager Command Server not RespondingKMQMI117I KMQMI118I KMQMI122I KMQMI123E Correct Password has not Been ProvidedKMQMI124E KMQMI125I KMQMI131E KMQMI130EKMQMI132E KMQMI133E KMQMI139I Perform Startup is not Supported KMQMI138EKMQMI140I Perform Shutdown is not Supported KMQMI141E KMQMI147E KMQMI146EKMQMI148E Queue Ignored KMQMI154E KMQMI153EEXIST. SET Channel Ignored KMQMI155E Ignored KMQMI158EKMQMI159E KMQMI160E Monitor a non-default queue manager There is no SET Manager command in the command fileUser Response Add a Perform Startmon command to the command CCC for MQSeries to start monitoring KMQMI170E KMQMI169E Environment Error Unable to Create ThreadKMQMI171I KMQMI172I KMQMI178E KMQMI174IKMQMI175E Abend in Processevent Intercepted KMQMI184E KMQMI180EKMQMI181E Lost KMQMI185EKMQMI193E KMQMI194E KMQMI195E KMQMI197I Mqseries Manager Command Server is AvailableKMQMI196I KMQMI198I KMQMI202I KMQMI201W Failed to Notify Offline StatusKMQMI203W KMQMI204W KMQMI207W KMQMI208I Error LOG Monitoring Feature is Turned OFFKMQMI209E Group Must Specify Single Queue Name Candle Products Messages Manual KLVHS-KONCT KMQMQ104E Error Installing SMF HOOK. RC=rc REASON=rsKMQMQ105E BAD Return Code from SERVER. RC=rc KMQMQ107E KMQMQ106EKMQMQ108E KMQMQ109I KMQMQ114I KMQMQ113EKMQMQ115E KMQMQ116E KMQMQ119I KMQMQ118E Unable to Obtain Common Storage for SRB DriverTermination KMQMQ120E KMQMQ140W KMQMQ124IKMQMQ141E KMQMQ142E KMQMQ150W KMQMQ143EOpen for Input by Another Application OPENINPUTCOUNT=X KMQMQ204I KMQMQ203ECompleted KMQMQ206E KMQMQ211E KMQMQ210EKMQMQ212W Result in Incomplete Application Queue Statistics KMQMQ218E KMQMQ217EKMQMQ219E KMQMQ220E KMQMQ223W KMQMQ224E MQ Commands Cannot be Executed for Remote QmgrsStorage in Order to Maintain System Integrity KMQMQ225I KMQMQ232W KMQMQ229EKMQMQ233W Information Cannot be Collected SRBsrbname ABENDabendcode EPAentrypoint ADDRaddress KMQMQ243I KMQMQ242I QSG Monitor Disabled DUE to Zero QsgchkintervalKMQMQ244I KMQMQ245I KMQMQ402E aaaaaaaa Unknown input method KMQMQ401E aaaaaaaa Cics release must be at leastKMQMQ403E aaaaaaaa No valid action specified KMQMQ404E aaaaaaaa No transaction ID specified for Kmqamqci KMQMQ408W aaaaaaaa CCC for MQSeries already active in Cics KMQMQ414W KMQMQ413IKMQPD101E KMQRM104E KMQTR104I KMQTR103E BAD Return Code from NAME/TOKEN ServicesKMQTR105E KMQTR106E KMQTR113I KMQTR112IKMQTR114I KMQTR115E Trace Buffer could not be Written KMQVS102E KMQVS101EKMQVS103E KMQVS104E KMQW009E Agent Timeout Occurred KMQW008E Not Allowed by MsgaccessKMQW000W KMQW001I MSG PUT on Xmit Q Successful KMQW013I Command Accepted by MVS KMQW010E Not Allowed by Command OptionKMQW016E Syntax Error KMQW017E Command Failed KMQW019E Not Supported by Platform KMQW018E Not Allowed by SecurityKMVCCC001E Unable to Locate Kmvccc Global Area KMVCCC002E Invalid Status Item Name in Getattribute Request KMVCCC004E KMVCCC008E Internal Thread Dispatch ErrorKMVCCC005E Enterprise Object not Found KMVCCC006E Enterprise Object is not Valid KMVCCC013I Kmvccc Service Thread Shutting Down KMVCCC010E Unable to Initialize Kmvccc Service QueueKMVCCC011E Unable to Initialize SDM Interface KMVCCC012I EIB Change Thread Shutting Down KMVCCC017E Unable to Attach Situation Status Thread KMVCCC016E Unable to Initialize Situation Status ThreadKMVCCC018E Unable to Initialize EIB Change Thread KMVCCC019E Unable to Attach EIB Change Thread KMVCCC024E EnabledKMVCCC025E KMVCCC026E KMVCCC031I Kmvccc Support Initialization is Complete KMVCCC036E Unable to Attach SDM Service ThreadKMVCCC032I Kmvccc Shutdown Complete KMVCCC033E KMVCCC039E KMVCCC038EKMVCCC040E KMVCCC041E Request, requestcode KMVCCC052E KMVCCC051EKMVCCC053E No Children Found for the Enterprise KMVCCC054E Abend Detected in Thread Routine KMVCCC059W Attribute Name Translation Cannot be Performed KMVCCC058EKMVCCC060E KMVCCC100E Unable to Open Ddname Rkandatv Opendir KMVCCC104I KMVCCC103IKMVCCC105W KMVCCC106I KMVCCC109W KMVCCC108IKMVCCC110I KMVCCC111E Unable to Allocate Attribute Entry KMVCCC119E KMVCCC118EKMVCCC120W KMVCCC121E KMVCCC125E Unable to Allocate Node Status KMVCCC127E Unable to Allocate Command Node EntryKMVCCC126E Unable to Allocate Attribute Enumeration KMVCCC128E Unable to Allocate Node List KMVCCC132E KMVCCC131EKMVCCC133E KMVCCC134E MODULEerrormodule RCreturncode SCsensecode MODULEerrormodule RCreturncode User Response Check the Omegamon II for Vtam Configuration SCsensecode Failed MODULEerrormodule RCreturncodeRCreturncode SCsensecode Unable to Freemain Userwork During Session Termination Trace Cleanup Detected AN Abend Condition AdditionalError Encountered During Trace Cleanup Session Termination MODULEerrormodule RCreturncode Error Encountered Removing Trace Facility DuringKN3AF046 KN3AF047 User Session Terminated RCreturncode SCsensecode KN3AF054 Error When Reading membername MODULEerrormodule KN3AF052 Unable to Access Rkanpar MODULEerrormodule KN3AF057 Control Record GET Failed for DDNAMEddname KN3AF056 Allocating Dataset dsname KN3AF060 Vsam Logging Disabled MODULEerrormodule Reason KN3AF111 Dialogfunction NON-ZERO Return Code from NDM Call KN3AF110 Dialogfunction Unable to Obtain PassedKN3AF112 KN3AF114 Data not Available KN3AFNM1 Unable to Buildlocatemodify Npbnsb forNDM Control Module KN3AFNSB Load FAILED. NCP Statistics Manager NDM task Each ACT Cycle IntervalSystem Action NCP statistics information is not available From Resource Topology Message Type Internal or user error NCP Statistics Data Collection DisabledCode NCP statistics data from the NCP data manager NDM Request Failed for RESOURCEresourcename NPALUnpaluname GENDATEgenerationdate GENTIMEgenerationtime FailedGENDATEgenerationdate GENTIMEgenerationtime NCP Topology Genlevel Mismatch for NCP Topology not CREATED. will Retry Next ACT Cycle KN3AF134Interval KN3AF136 KN3AXNPB Addnpb Function Failed RCreturncode NDM ACT Resource Cleanup Complete NDM ACT Resource Cleanup in ProgressCleanup Requested NDM Task has Recycled Since Last INTERVAL. Resource KN3AF147 KN3AFNMI NCP Data Manager Task not InstalledKN3AF146 KN3AF150 Message Type KN3AF149KN3AF151 SMF Response Time Recording for NCP Resources is Inactive REASONreasoncode Topology Update Functions Initialization FailedNPALUnpaluname Failed RCreturncode Topology Upate Functions Module KN3AFNUT Load Failed KN3AF157NCP Statistics Data not Available KN3AF161 MODULEmodule NON-ZERO Return Code from TCP/IP Call Rregisternumber Rregisternumber registervalue PSW=programstatusword, ROUTINE=programname INFOinformationcode TCP/IP Collector MIB Browser Memory Allocation Failed Snmp Manager has Terminated TCP/IP Service Thread MIB Browser XmcsSnmp Manager Request Timed OUT Initialization Complete TCP/IP Service Thread MIB Browser Xmcs is Terminating TCP/IP Service Thread MIB Browser Xmcs AbendedTCP/IP Service Thread MIB Browser Xmcs Completed Reason reasoncode TCP/IP functionname FAILED. ERRNO=errorcode KN3CT131 MIB Browser Initialization Failed RCretcode KN3CT125KN3CT132 MIB Browser is not Active RC=retcode MODULEmodule KN3CT201 KN3CT201 module Unable to Load Module module KN3CT205 KN3AITXB Required Parameter not Supplied for KN3CT209 KN3AITXB Invalid Return Code from KN3APTXE KN3CT208 KN3AITXB Ezasmi Gethostname FailureKN3APTXE KN3CT302 KN3AITDE Required SUB-ELEMENT Parameter Find Requires String Vtam Command ErrorCharacter String not Found Locate Requires String Sampling Interval WAS TOO LONG, TRY Again Must be NumericInvalid Selection Collection Interval Timeout Data Reinitialized User Commands UpdatedType a / Next to the Desired Selections Selection not Available Variable Named varname Contains contentsofvarname Request Successful Dialog ErrorInvalid Command Select the Actions PULL-DOWN Menu Threshold Criteria UpdatedResources Added Field is Required Threshold Update Failed Global Options UpdatedGlobal Options Update Failed Invalid Numeric Range Operand for the Autorefresh Command Must be on ETE Interface DisabledOFF, or a Numeric Value from 10-3600 Seconds Must be in the Range of 15-360 Minutes Please USE the Following Format SAS Clist WAS not Entered in the Correct FormatCANDLE.ON.V500.SASCNTLKN3CLST6 SAS Clist Dataset Name Specified Cannot be Located Monitoring Stopped Monitoring StartedMonitoring Thresholds Changed Monitoring Thresholds Deleted Monitor Options Updated Monitor Options Update ErrorTerminal Options Updated Autorefresh Options Updated SMF Definition Changed SMF Definition AddedSMF Definition Deleted Response Time Must be Greater then Previous Range Not Allowed to Delete the only Administrator AT Least 1 Administrator is RequiredUser Authority Changed User Authority Deleted NEW Rachsrt Parameter is not Prime Navigation not AllowedLight PEN is not Supported Trace Already Active or Completed Trace is not Active GET Failed for Default Printer OptionsClose Failed for Sysout Dataset No Screen Prints Were Requested ADD Failed for Screen Print LOG Allocate Failed for Sysout DatasetOpen Failed for Sysout Dataset PUT Failed for Sysout Dataset ERROR, see Viewlog Printer Options UpdatedTrace ABENDED, Data Still Good LU not Found To Access the Specified SAS Print Options LIBRARY. Return Following Error Occurred When Omegamon AttemptedTREND/EXCEPTION LOG File Access Error ETE Started Task is not Available Historical Graph Options Before Attempting to Access Options Pulldown Panel are not VALID. Please UpdateAN Unexpected Error Occurred Requested PIU WAS not Found Enter C or W Enter YES or noEnter a Numeric Value or Leave Blank Critical Must be Greater than Warning Domain Categories Selection is only Valid for the IO00 BufferPool Enter N or S View Command Invalid When Displaying DirectoryAlphanumeric Field Required AN Attempt to Access the Address Space Failed Control Block Cannot be Accessed for ONEFollowing Reasons Control Block is no Longer Valid Unable to Find the Actual RPL. the Crpl is Displayed Tuning Statistics are not ActiveINSTEAD. Most of the Data from the Original RPL can be Found in the Crpl Not Valid for GROUPS. USE List L and Select AN Individual Trace not StartedResource Resource not Found RPL Data is only Available for Applid Resources Specify Either Resource Name or Network AddressResource has no Sessions Vtam Replaceable Constants Module Istracon is not That LIMIT23,X is Coded for the Startup Parameter Storage Required for Modelling not AVAILABLE. EnsureEnter N, L, P, or U Enter M or C Resources Must be the Same Type Enter P or USelect only ONE Resource with Mark Select only ONE Resource with Copy Resource has Already Been Started Resource has no Subordinate ResourcesResource has NPACOLL=NO and Cannot be Monitored Resource is not Active to Vtam and Cannot be Monitored Defaults Monitor Options will be Updated with the Current SiteResource Already Using Site Default Options No Exceptions are Generated for this Field No Subordinate Resources are Being Monitored Resource Must be AN LU or TerminalResources Already Added Resource Must be Stopped Before Monitoring Options can Group Description Already Exists No Update AUTHORIZATION, View onlySubordinate Resources Must be Stopped Before this Resource can be Stopped NCP Trend Recording Disabled AT Startup Resources has Been DisabledNCP Topology Update Interval Must be Greater than Enter M or H Invalid Scroll Amount Update SuccessfulNo LUS Associated with Resource Address Space Name Already Exists Must be Alphabetic Update ErrorBuffer Pool Data not Available Connection Number Required for Drop AT Least ONE Entry is Required TCP/IP Command ErrorOID Name is Unknown OID Number is Unknown HI Priority Connection not Defined KN3FCCMD Command Processing Complete Fpon Component Functions Installation Failed KN3AYFCV not AVAILABLE. Install Option RequiredFpon Component Functions Installation Complete Fpct Component Functions Installation Failed Fpct Component Functions Installation CompleteSevt Vtam Environment Installation Complete Sevt Vtam Environment Installation Failed Semv MVS Environment Installation Failed Semv MVS Environment Installation CompleteSevt Vtam Environment Status Failed ROUTINE=KN3AHEV3 Semv Vtam Environment Status Failed ROUTINE=KN3AHEM3 REASON=reasoncode RETURN=returncode KN3FC055 Message Type User errorNdmt NCP Data Manager Task Start Failed ROUTINE=KN3AHNT1 REASON=reasoncode RETURN=returncode Status text Tcpc TCP/IP Collector Installation Failed Dbug Extended Diagnostics Mode Status Failed Tcpc TCP/IP Collector Stop Failed ROUTINE=KN3ACTC2 Tcpc TCP/IP Collector Start Failed ROUTINE=KN3ACTC1 KN3FC096 Tcpc Status Command Failed ROUTINE=KN3ACTC3 FTP Initialization Failed to Load KN3INFT2 Initializing FTP Reporting ThreadFTP Initialization Complete Override Value Accepted Error Freeing CSACSA Monitor Ended Bytes CSA Increase Bufmax AND/OR Reduce Collectinterval Error Loading LlllllNo Jobname Found CSA Freed Error RE-LOADING Llllll Error Freeing CSAError Obtaining CSA Recovering from Already Added Exit Adding SMF Exits Error Freeing CSA Copy of RecordAdded SMF Exits Deleting SMF Exits Table Cleanup Running Initializing Cleanup ThreadNo Unprocessed SMF Records Omegamon FTP Agent Resource Manager Entered Resource Manager Started Error no Eyecatcher in CSAInvalid ROW Pointer IRA Subnode Registration Thread is Active Tcpncpvtam Monitor Subnode Deregistered for Tcpncpvtam Monitor Subnode Registered for Originnode KN3IR905 IRA Manager command unknown KN3IR904 Pthreaddetach errorKN3IR906 IRA Manager command operand missing KN3IR908 IRASubnodeRegister error RC=xx Node=ccccccccccccc IRA Subnode Registration Thread Currently Active IRA Subnode Registration Thread is not ActiveIRA Subnode Registration Thread is not Responding KN3IR919 TCP Monitor Start Failed for Originnode originnode KN3IR916 $SCAN Error Parsing cccccccc ROUTINE=ccccccccR0=hhhhhhhh R1=hhhhhhhh ROUTINE=routine KN3IR926 TCP Monitor Collection Failed MACROcccccccc macro KN3IR922 TCP Monitor Stop Failed for Originnode originnodeKN3IR924 IRA Subnode Deregistration Failed ROUTINE=cccccccc Terminate KN3LC102 Appc Request Error appcrequest ROUTINE=routinenameKN3LC101 Collector Applid applid UNAVAILABLE, NDM Task will KN3LC109 KN3AYNCE Select Count Error ROUTINE=routinename KN3LC107 SQL Request ERROR, ROUTINE=routine-nameKN3LC104 Missing KN3AYLCA Work Area ROUTINE=routinename KN3LC108 Failure to Acquire Storage for storagearea KN3LC111 KN3LC110 Appc Client Services Abend CODE=abendcode PSW=pswKN3LC112 Connection Failure Acbname localid KN3LS101 ROUTINE=routinename RETURN=returncode REASON=reasoncode RETURN=returncode REASON=reasoncode KN3LS111 KN3AYWKG Chain Error ROUTINE=routinename KN3LS110 Invalid Resource Count Error ROUTINE=routinenameKN3LS112 Lucs Services Abend CODE=abendcode PSW=psw KN3LS114 Connection Failure Using Acbname applid NCP Statistics Collector is Terminating NCP Statistics Collector Available for Requests REASON=reasoncode Npaluname KN3ND015 $PAM$PAMname Failed ROUTINE=KN3AHN04 DDNAME=KN3RRT Load Failed Resourcename NPALU=npaluname R15=registervalueR1=returncode R15=returncode R0=returncode R1=returncode R1=registervalue MEMBER=membername R15=registervalue R0=registervalueRRTname Ddname KN3RRT During functioncall. Found Label NCPsourcelabel Network Topology Error in Locate Function DuringTopology for Deletion Current Topology Is not SpecifiedNCP will not be Monitored NCP Data Manager Task Available for Requests PSW=programstatusword ROUTINE=routinename NCP Data Manager Task is TerminatingNCP Data Manager Task Termination Complete NCP Data Manager Task Initialization Failed SENSE=sensecode RETURN=returncodeKN3ND108 SQL Resource Allocation Failed RETURN=returncode SENSE=sensecode KN3AYNCE Allocation Failed KN3AYNRE RDS Segment Allocation FailedKN3AYNRE Header Allocation Failed NCP data manager task request fails KN3ND130 KN3AGNPB Service Function ABENDED, CODE=abendcodeResourcename failed System Action The NCP data manager task request fails KN3AGNPB Entered for AN Invalid Function Ndmt Service Request FailedKN3AGNPB no Hash Table Address Found in the ACT Work Area OWNER=ownername,RETURN=hexreturncode KN3AGFPF Floating Point Function Failed REASON=ABENDCODE=abendcode Genlunam Errors Detected Genpunam Errors DetectedErrors Detected During X.25 Resource Scanning for KN3AGNTS Labeltypetab ACT Started Successfully Appc Environment not InitializedAppc Environment Termination Failed RCreturncode Omegamon II for Vtam V500 Initialization ErrorETE Connected Successfully KN3PN012 Table Service Error in Dialog callingdialog KN3PN008 Logon Error Encountered for User userid FunctionUSERWORKuserworkareaaddress textstring KN3PN011 KN3PN016 Error in Dialog errordialog LUluname APPLapplid KN3PN015 Engine Services Error in Dialog callingdialogKN3PN017 V500 Product Conversion Complete Omegamon II for Vtam V500 Initialization Failure APF Authorization FailedOmegamon II for Vtam V500 Initialization Failure Invalid Vtam Level Detected NCP Global Options Table Conversion Complete Security EnabledOmegamon II for Vtam V500 Initialization Failure SESSIONSDMsessionname SDMAPPLSDMapplid Security EnabledSYSTERMSDMluname REFRESHSDMrefreshinterval TRIGGERSDMhotkey Enhanced Original Zoom Activated KN3SD003KO41031 Situation &1 is true Severity System Programmer ResponseNo KO41034 Monitoring for situation &1 ended KO41039 Error in request &1. Status &2. Reason &3Severity KO41035 Object &1 changed by &2 KO41042 is written to the log User Response Change the compare value & 2 to a numeric Be numeric Another KO48071 Policy &1 activated KO48010 Policy &1 startedBefore it finishes running KO48079 Activity &1 in policy &2 updated by &3 KO48078 Policy &1 updated by &2KO48080 Ranking group &1 updated by &2 KO48073 Policy &2, activity &1 has started User KO48091 Changing priority for job &1 job number &2 to &3 KO48090 Policy &1 has deactivated. Restart limit exceededKO48092 Changing job queue for job &1 job number &2 to &3 KO48093 Changing time slice for job &1 job number &2 to &3 KO48110 Policy &2, activity &3 Evaluating situation &1 KO48106 Ending job &1 job number &2KO48112 Holding job &1 job number &2 KO48119 Releasing job &1 job number &2 KO48152 Situation &1 could not find message queue &2 KO48148 Policy &2, activity &3 Waiting for &1 secondsKO48150 Policy &2, activity &3 Running policy &1 KO49019 Candle Management Server CMS log not displayed KO49016 Situation &1 imbedded in policy &2. Not deletedKO49017 Policy &1 imbedded in policy &2. Not deleted Severity System Programmer ResponseNo Candle Management Server CMS again Be used Severity System Programmer ResponseImmediate KO4SRV002 KO4SRV001KO4SRV003 KO4SRV004 KO4SRV006 KO4SRV005KO4SRV007 KO4SRV008 KO4SRV019 KO4SRV018KO4SRV020 KO4SRV021 KO4SRV031 KO4SRV030KO4SRV032 KO4SRV033 KO4SRV040 KO4SRV039KO4SRV041 KO4SRV042 KO4SRV050 KO4SRV049KO4SRV051 KO4SRV052 KO4SRV055 KO4SRV054KO4SRV056 KO4SRV057 KO4SRV062 KO4SRV061KO4SRV063 KO4SRV064 KO4SRV069 KO4SRV068KO4SRV070 KO4SRV071 KO4SRV075 KO4SRV074KO4SRV076 KO4SRV077 KO4SRV081 KO4SRV080KO4SRV082 KO4SRV083 KO4SRV090 KO4SRV089KO4SRV091 KO4SRV092 KO4SRV097 KO4SRV096KO4SRV098 KO4SRV099 KO4SRV104 KO4SRV103KO4SRV105 KO4SRV106 KOCJO002 Interface Shutdown Requested KOCJO001 Initialize Completed NormallyKOCJO003 Interface Shutdown Completed KOCJO004 Interface Suspend Requested KOCJO008 Unable to Determine Start Type KOCJO012 Journal Number ErrorKOCJO009 KOCPLT00 not LOCATED. Check Linkedit KOCJO010 Failure in Cics Inquire KOCJO018 Exit Enable Error KOCJO016 Journal Open ErrorKOCJO019 Exit Extract Error KOCJO014 Suspend Transaction Inactive KOCJO020 Getmain Failure KOCJO024 Exit Disable FailureKOCJO021 Exit Start Failure KOCJO022 Exit Stop Failure KOCJO027 Interface Inactive KOCJO026 Transaction Start FailureKOCJO028 Initialize is Already in Process KOCJO029 Resume is Already in Process KOCJO034 Error Occurred During Cleanup Freemain KOCJO033 Error Occurred During Cleanup DisableKOCJO037 Error Received During Wait Processing KOCJO032 Unknown Function in Process KOCJO039 Journal Write Failure KOCJO038 Error Received During Freemain ProcessingKOCJO040 Interface Transaction has Abended KOCJO041 Rtype not Present in Dictionary KOCJO046 Omegbsc not Present in Dictionary KOCJO044 Netname not Present in DictionaryKOCJO045 Uowid not Present in Dictionary Candle Products Messages Manual KLVHS-KONCT KOGCM002 KOGCM001KOGCM003 KOGCM004 KOGDF005 KOGCM005KOGDF006 KOGDF007 KOGEC002 Specified Session not Defined to Povi KOGEC001 No Session SpecifiedSessid omitted KOGEC004 KOGEC003KOGEC005 KOGEC006 KOGEC009 KOGEC008KOGEC010 KOGEC011 KOGEC014 KOGEC013KOGEC015 KOGEC016 KOGER001 Invalid Selection Code KOGEC018KOGER002 KOGEV001 KOGEV005 KOGEV004KOGEX001 KOGIN001 KOGLM004 KOGLM003KOGLM005 KOGMM001 KOGOP001 KOGOP000KOGOP002 KOGOP004 KOGOP006 KOGOP005KOGRT006 KOGRT009 KOGRU003 KOGRU002KOGRU004 KOGRU005 KOGRU012 KOGRU017 Testing PATH, PF12 PressedKOGRU013 KOGRU014 KOGRU019 KOGRU018KOGRU020 KOGST001 KOGTB002 KOGTB001KOGTB003 KOGTB004 KOGTB009 KOGTB007KOGUT001 KOGUT002 KOGUT006 KOGUT005KOGUT007 KOGUT009 KOGVL00I KOGUT012KOGVL02I KOGVL03S KOGVL06S Unable to Locate VU Server IPC Queue KOGVL05S Unable to Determine SLU ApplidKOGVL07S KOGVL08E KOGVL11S KOGVL10IKOGVL12S KOGVL13E KOGVL15I KOGVL14I Outbound LU0 PacketKOGVL16E KOGVL20I KOGVL22I KOGVL21IKOGVL23I KOGVL24I KOGVL26E KOGVL25EKOGVL27E KOGVL29E Unable to Terminate lrtype STATUS=status KOGVL30EKOGVL31E BAD pdutype CONTINUATION. SEQNO=seqno EXPECTED=eseqno KOGVL34I KOGVL33IKOGVL35I KOGVL36I KOGVL40E KOGVL38EKOGVL41E KOGVL99I KOGVS002 KOGVS001KOGVS003 KOGVS004 KOGVS02E KOGVS01EKOGVS03E KOGVS04I KOGVS06E KOGVS05EKOGVS10E KOGVS11I VU Server Shutdown in Progress KOGVS20E KOGVS13IKOGVS90S VU Server Initialization Failed KOGVS99I VU Server is Terminating KOGVT10E Vupl TYPE=vupltype ContentsUnable to Locate Parameters LRN=lrn KOGVT14I KOGVT18I KOGVT17WKOGVT19I KOGVT20I KOGVT23W KOGVT22EKOGVT24E KOGVT25I KOGVT27I KOGVT26IKOGVT28E KOGVT29E KOGVT32E KOGVT31IKOGVT33E KOGVT34E KOGVT35E KOGVT34IKOGVT36E KOGVT37E KOGVT40I KOGVT38EKOGVT99I VU Thread is Terminating KONAF001 KONAF004 ACT Terminated Abnormally KONAF003 Background ETE Collector Terminated with ErrorManager NDM functions module failed KONAF006 Member Koncnmap Contains Invalid ACB Name MODULEerrormodule RCreturncode KONAF041 KONAF021KONAF031 KONAF045 KONAF044 Error Encountered During Trace CleanupCapture Reader Codes MODULEerrormodule RCreturncode KONAF047 KONAF046 Error Encountered Removing Trace Facility DuringKONAF048 KONAF050 KONAF052 KONAF051KONAF053 KONAF054 KONAF057 KONAF056KONAF058 KONAF059 KONAF062 KONAF060KONAF061 KONAF111 KONAF110KONAF112 KONAF113 KONAFNM1 Unable to Locate Site Monitor Table tablename KONAF115KONAF116 KONAFNM1 Unable to Buildlocatemodify Npbnsb for KONAF117 KONAF121 KONAF120KONAF122 KONAF123 KONAF125 KONAF127 NCP Statistics Data Collection DisabledKONAF126 KONAF128 KONAF131 KONAF130KONAF132 KONAF133 NCP Topology Genlevel Mismatch for KONAF136 KONAF135Konaxnpb Addnpb Function Failed RCreturncode KONAF137 KONAF141 NDM ACT Resource Cleanup Complete KONAF140 NDM ACT Resource Cleanup in ProgressKONAF138 Konaxnpb Gethash Function Failed RCreturncode KONAF144 KONAF146 Konafnmi NCP Data Manager Task not InstalledKONAF145 KONAF147 KONAF149 KONAF148From the Konaxcrb macro KONAF150 KONAF153 KONAF154 Topology Update Functions Initialization FailedKONAF155 KONAF156 KONAF159 KONAF158KONAF160 KONAF161 KONCT002 KONCT001 $INIT Failed for Main Thread LRNKONCT003 KONCT004 TCP/IP Statistics Collector is Terminating KONCT011 KONCT010KONCT012 KONCT013 KONCT050 Snmp Manager has Terminated KONCT015KONCT051 KONCT052 Support Services. See message KONCT103 which follows KONCT102 TCP/IP Service Thread MIB Browser Xmcs AbendedKONCT103 KONCT110 KONCT113 $GMEM Failed for Command Param Structure KONCT112 $GMEM Failed for Command Output RecordKONCT121 TCP/IP Address Space Collector Failed KONCT122 KONCT131 KONCT125KONCT132 KONCT201 KONCT203 KONCT202KONCT204 KONCT206 Konaptxe KONCT208KONCT210 KONCT301 KONCT303 Konaitdd Invalid Element Parameter parm KONCT303 Candle Products Messages Manual KLVHS-KONCT

Candle GC32-9172-00 Usage=Normal, That references the process on the Triggers settings, Enabled

Models: GC32-9172-00

Usage=Normal.

name, which is to be used as the transmission queue.

that references the process on the Triggers settings page.

defined as a local or remote queue within the Queue Manager.

Manager as the alias queue’s target queue.

has triggering enabled.

enabled.

within the Queue Manager.

name of a queue on the Queue Manager.

GC32-9172-00 specifications