KLVRT020, KLVRT021 | Candle GC32-9172-00 manual

KLVRT020	RTM NPM SEND REQUEST FAILED: LU=lu-nameAPPL=applname
	EVENT=X’xx’
	Explanation: A non-zero return code was returned from the IBM-supplied
	interface module FNMNSI because of a request error or an exceptional condition
	where:
	Ælu-name is the physical terminal name.
	applname is the application name if applicable.
	System Action: Processing associated with the request is terminated.
	User Response: A list of return codes and reason codes can be found in IBM’s
	NPM Installation and Customization under the NetView® Synergy Interface
	appendix. Contact Candle Customer Support if you need further assistance.
	Message Type:	INFO.
KLVRT021	RTM NPM request FAILED: RC=nn REASON=nnn
	Explanation: A non-zero return code was returned from the IBM-supplied
	interface module FNMNSI because of a request error or an exceptional condition.
	This message is produced for CONNECT and DISCONNECT requests.
	System Action: Processing associated with the request is terminated.
	User Response: A list of return codes and reason codes can be found in the
	IBM manual NPM Installation and Customization under the NetView Synergy
	Interface appendix. Contact Candle Customer Support if you need further
	assistance.
	Message Type:	ALERT.
KLVRT022	RTM NPM VECTOR ERROR
	Explanation: CT/Engine detected an invalid internal NPM function call.
	System Action: A call to NSI fails, CT/Engine creates a DUMP and continues
	processing.
	User Response: Contact Candle Customer Support with the contents of the
	DUMP.
	Message Type:	ABEND.
KLVRT023	RTM NPM NSI ADDRESS SPACE NOT RUNNING
	Explanation: The NPM NSI address space is not running. NPM has rejected a
	SEND, CONNECT, or DISCONNECT request by CT/Engine with a return code of
	20.
	System Action: The RTM interface in CT/Engine is terminated if active. If the
	rejected request is CONNECT, CT/Engine sets a timer and retries the request
	every 60 seconds.
	User Response: Start the NSI address space and reissue the RTM ON
	command.
	Message Type:	ALERT.

KLVHS001–KLVSC009 75

Page 75

Image 75

Candle GC32-9172-00 KLVRT020, KLVRT021, KLVRT022 RTM NPM Vector Error, KLVRT023 RTM NPM NSI Address Space not Running

GC32-9172-00 specifications

The Candle GC32-9172-00 is a state-of-the-art device that has gained significant recognition in the technology landscape due to its innovative features and exceptional performance. This product stands out for its ability to meet the demanding requirements of modern users, providing a seamless experience across various applications.

One of the foremost features of the GC32-9172-00 is its advanced processing power. Equipped with a high-performance processor, the device is designed to handle complex tasks efficiently, enabling users to run multiple applications simultaneously without experiencing slowdowns. This makes it particularly attractive for both professionals and enthusiasts who need reliability in performance.

In terms of connectivity, the GC32-9172-00 incorporates cutting-edge wireless technology, ensuring that users remain connected at all times. The device supports a range of wireless protocols, facilitating smooth communication with other gadgets and networks. Its robust connectivity options allow for quick data transfer, enhancing productivity and streamlining workflows.

The design of the Candle GC32-9172-00 is another highlight. With a sleek and modern aesthetic, it not only looks appealing but is also ergonomically crafted for user comfort. The user interface is intuitive and easy to navigate, making it accessible for individuals of all technical skill levels. The display is vibrant and responsive, providing an immersive experience whether used for work or entertainment.

Moreover, energy efficiency is a key characteristic of the GC32-9172-00. It utilizes advanced technologies to minimize power consumption while still delivering high performance. This eco-friendly approach not only helps reduce electricity bills but also supports sustainability initiatives, making it a responsible choice for environmentally conscious users.

Security features are paramount in today’s digital landscape, and the Candle GC32-9172-00 does not disappoint. It is equipped with top-notch security technology to safeguard user data and ensure privacy. With built-in encryption protocols and regular software updates, users can trust that their information is well-protected against potential threats.

In conclusion, the Candle GC32-9172-00 is a versatile and high-performing device that encapsulates the needs of today’s users. With its powerful processing capabilities, exceptional connectivity, ergonomic design, energy efficiency, and robust security features, it stands out as a preferred choice in the market. Whether for professional applications or personal use, the GC32-9172-00 exemplifies the perfect blend of technology and innovation.

Contents

Candle Products Messages Manual Volume Candle Products Messages Manual KLVHS-KONCT Contents Candle Products Messages Manual KLVHS-KONCT KLVHS006 KLVHS001 Handle Services Manager Initialization CompleteKLVHS002 KLVHS005 Klvinhsm Rkanpar Parameters KLVHS202 No Handle Pools Available KLVHS203 Handle Services Manager Vector Table is InvalidKLVHS011 KLVHS201 Info ErrorKLVHS811 Handle Services Manager Global Statistics KLVHS205 Invalid Release Handle Request KLVHS822 KLVHS821 Handle Services Manager Global Statistics DetailKLVHS817 KLVHS818 KLVHS832 KLVHS831 Handle Services Manager List Ownerid StatisticsKLVHS841 Handle Services Manager List Poolid Statistics KLVHS830 KLVHS845 KLVHS843KLVHS844 Handles KLVIC002 KLVHS854KLVHS855 KLVIC001 KLVIN001 KLVIN403 Command Library UnavailableKLVIN000 CT/IX Interface Initialized KLVIN000 KLVIN409 Initialization Library Unavailable KLVIN406KLVIN407 Flushing Initial Messages KLVIN408 KLVIN414 KLVIP003 Unsupported IPC ServiceKLVIN412 KLVIN413 Alert KLVLI001 Lock Manager Integrity ErrorKLVLR003 Logical Resource Integrity Error KLVLR004 PURGE/CLEANUP Exit Error DETECTED, Dump Requested KLVLW002 KLVLR006 Logical Resource Control Block ErrorKLVLR005 KLVLW001 KLVLW012 KLVLW003KLVLW004 KLVLW011 Dynamic Allocation Values KLVLW027 Copies Must be Between 1 KLVLW031 Rklvlog Switch RequestedKLVLW022 KLVLW023 KLVLW083 KLVLW041 Rklvlog Dataset Disabled by Permanent ErrorKLVLW081 KLVLW082 KLVNA004 KLVNA003 Database INACCESSIBLE, no Vsam LSR ResourcesKLVNA001 KLVNA002 KLVNA009 KLVNA006KLVNA007 KLVNA008 Klvinnam Rkanpar Parameters KLVNA015 KLVNA012KLVNA013 KLVNA014 KLVNA020 KLVNA017KLVNA018 KLVNA019 KLVNA031 KLVNA021KLVNA022 KLVNA023 KLVNA037 KLVNA034 Database Allocation Failed Resource ErrorKLVNA035 KLVNA036 Control Point Options not Valid with VALIDATE= KLVNA101 KLVNA102KLVNA103 GROUPgroup TERMterminal APPLappl Current Password Expired CNTRLPTcntrlpt USERIDuseridNEW Password Invalid CNTRLPTcntrlpt USERIDuserid KLVNA104 KLVNA107 User Access Revoked CNTRLPTcntrlpt USERIDuseridKLVNA106 User not Defined to Group CNTRLPTcntrlpt USERIDuserid Terminal not Authorized CNTRLPTcntrlpt USERIDuserid Group Access Revoked CNTRLPTcntrlpt USERIDuseridKLVNA108 KLVNA109 Operator not Authorized CNTRLPTcntrlpt KLVNA110Application not Authorized CNTRLPTcntrlpt USERIDuserid KLVNA111 KLVNA113 KLVNA112 KLVNA252 KLVNA114KLVNA151 KLVNA251 KLVNA256 Refresh of Resource Profiles Complete KLVNA253 Resource List Build DISABLED, not APF AuthorizedKLVNA254 KLVNA255 KLVOP003 KLVNT002KLVOP001 KLVOP002 KLVOP008 KLVOP005KLVOP006 KLVOP007 KLVOP024 KLVOP012 Active Resource ListKLVOP022 KLVOP023 KLVOP028 Confirmation not RECEIVED, Shutdown Bypassed KLVOP025KLVOP026 KLVOP027 KLVOP041 KLVOP032 Zero Interval not Allowed on Every CommandKLVOP031 KLVOP033 Time Interval Greater than 240000 Specified KLVOP053 KLVOP044KLVOP046 KLVOP052 IDoperator DEVdev PENDpendnum KLVOP112 KLVOP102KLVOP103 KLVOP111 KLVOP125 Trace Request REJECTED. Required Argument Missing KLVOP124 Internal Trace Facility DisabledKLVOP122 KLVOP123 KLVOP131 Trace Classinttermacbdlg Status KLVOP130 GTF Interface has not Been EnabledKLVOP129 Terminal KLVOP161 KLVOP142KLVOP143 KLVOP152 KLVOP184 KLVOP165KLVOP182 KLVOP183 Emulation Session Started KLVOP193 KLVOP191KLVOP192 For Autopurge KLVOP202 KLVOP194 Resource Name is RequiredKLVOP195 KLVOP201 Anyappl Specified in a NON Dedicate Pool Ignored KLVOP209 Sesslim Specified in a NON Dedicate Pool Ignored KLVOP205KLVOP207 KLVOP208 KLVOP291 KLVOP210 Nocappl Specified in a NON Dedicate Pool IgnoredKLVOP211 KLVOP290 KLVOP304 KLVOP303 Viewlog Cluster not AccessibleKLVOP314 Command Issued KLVOP302 Viewlog Cluster not Available KLVOP405 KLVOP402KLVOP403 Unable to Open JES Spool File KLVOP404 KLVOP553 KLVOP503 No Text Passed to the MVS CommandKLVOP502 KLVOP552 KLVOP652 KLVOP555KLVOP601 VPO Facility not Available KLVOP651 KLVOP658 KLVOP655KLVOP656 KLVOP657 KLVOP809 Print Request Accepted KLVOP803KLVOP804 KLVOP805 KLVOP856 KLVOP853KLVOP854 KLVOP855 KLVOP904 KLVOP901 NAM InactiveKLVOP902 KLVOP903 KLVOP911 KLVOP908KLVOP909 KLVOP910 User userid Defined date time KLVOP926 KLVOP922KLVOP923 KLVOP924 KLVOP960 KLVOP930KLVOP951 SCB Dump KLVOP953 KLVOP966 KLVOP963 Command ERROR, RTM Interface MAY be SET on or OFFKLVOP964 KLVOP965 KLVOP969 KLVOP972 GTF Interface DisabledKLVOP973 Command ERROR, GTF Interface MAY be SET on or OFF KLVOP968 KLVPA003 KLVOP975KLVPA001 KLVPA002 KLVPA007 KLVPA004KLVPA005 KLVPA006 No Valid Request Coded for Functionpds KLVPM010 KLVPM005 PSM Buffer Integrity ErrorKLVPM001 KLVPM003 KLVPM013 PSM ERP Info Block Pointer is Zero Modname,attentioncode,fdbk, errordata,datastreamKLVPM011 KLVPM012 PSM Private Extension not Initialized Candle Products Messages Manual KLVHS-KONCT KLVPM051 Klvinpsm Rkanpar Parameters KLVPM052LOG KLVRE001 Gcsdisks Refreshed KLVPM052KLVPM101 KLVPT001 KLVRE008 KLVRE004KLVRE005 KLVRE006 KLVRE009 Sense Code Table Refresh from dsnamemember resulttextUser Response Depends on resulttext KLVRS002 Invalid RSS Release Request KLVRM004 Logical Resource Exit Stack Integrity ErrorKLVRT001 Parameter Error KLVRS001 Invalid $RSS Request KLVRT012 Unable to Load NPM Module Fnmnsi KLVRT011 NPM Module Fnmnsi Requires APF AuthorizationKLVRT013 $STG Error KLVRT014 Parameter Error KLVRT023 RTM NPM NSI Address Space not Running KLVRT022 RTM NPM Vector ErrorKLVRT020 KLVRT021 KLVSC002 KLVRT030 $STG ErrorKLVRT031 Parameter Error KLVSC001 KLVSC007 KLVSC004KLVSC005 KLVSC006 Environmentalinformation KLVSC009 Invalid Time SpecificationKLVSC008 Ambiguous Keyword Reference keyword KLVSD003 Allocation Detail SIZErange USEusecnt TOTALtotcnt ACCESSEDacccntKLVSD001 Primary Main Storage Information KLVSD002 Extended Main Storage Information FREEfree CARVEDcarved OVERHEADovhead KLVSD005LIMITstolim SLOPEsl SIZESrange TOTALtot KLVSD006 Message Type Reply KLVSD007 pp% is in USE tt% Allowed Threshold Exceeded KLVSD032 KLVSD021TMSnum PREFIXpfx CUSHIONcshn KLVSD031 Buffer Pool Information Segments INUSEinuse MAXmax GETSgets FREESfrees Qq KLVSD033Buffers INUSEinuse MAXmax GETSgets FREESfrees KLVSD034 KLVSD103 KLVSD039 END of Buffer Pool InformationKLVSD101 Main Storage Scan Started KLVSD102 Main Storage Scan Ended KLVSD105 KLVSD106 Insufficient Storage to Process CommandKLVSD104 NAME.... SIZElength TOTALcount KLVSE052 KLVSD108 Storage Integrity ERROR. Scan TerminatedKLVSE051 Default Sense Code Table Defined KLVSD107 KLVSE058 KLVSE055 User Sense Code Table DefinedKLVSE056 KLVSE057 KLVSE063 Klvinsns Rkanpar Parameters KLVSE059 Sense Table TOO LARGE, IgnoredKLVSE061 KLVSE062 KLVSI002 KLVSE064KLVSI001 Rkanparklvinstg Parameters KLVSI031 Invalid Storage Class During GET KLVSI030 Control Block Error During GETKLVSI040 Control Block Error During Free KLVSI022 Invalid Storage Class on Terminate Request KLVSI041 Zero Address on Free Request KLVSI043 Storage Integrity ErrorKLVSI050 Control Block Error During USE/DROP KLVSI051 Logic Error During USE/DROP Is in Effect KLVSP001 $SPS Invocation or Internal ErrorKLVSP002 $SPS String Length Invalid KLVSQ000 KLVSS005 KLVSS002KLVSS003 KLVSS004 KLVST003 KLVST001 Candle Engine Initialization ERRORS, Abend U0012KLVST005 MVS Jobstep Authorization Required KLVST002 TSO Option Invalid for NON-TSO Address Space Bldvrp Failed for Vsam LSR Buffer POOL, RC=rc KLVST007 KLVST013 Extended Reserved Main Storage Unavailable KLVST014 Invalid Trace SpecificationKLVST016 Invalid Event Specification KLVST012 Extended Main Storage Unavailable KLVST021 LOG Buffer Storage Unavailable KLVST020 LIMIT/GRANULE Option Specification ErrorKLVST018 Unable to Open Rklvlog Dataset KLVST019 Unable to Open Rklvsnap Dataset KLVST026 Transient Already Resident Relocation Error BldlKLVST024 Free Storage List Unavailable KLVST025 Unable to Identify Subtask Entrypoint KLVST032 Percentage is Invalid in Quiesce Parameter KLVST028KLVST029 Invalid Value for Slope Parameter KLVST030 Unable to Determine CPU Identification Begin Vectors Differ from Previous Elements KLVST038 Steplib Authorization RequiredKLVST036 KLVST037 Component KLVST043 Unable to Open Rkanpar Dataset KLVST041 Error Initializing Sysmdump DatasetKLVST040 KLVST042 KLVTB004 KLVTB001KLVTB002 KLVTB003 KLVTB009 Unable to Write Table Database Control Record KLVTB007 Unable to Access Table ClusterKLVTB006 No LSR Pool Allocated KLVTB008 Unable to Read Table Database Control Record KLVTB015 KLVTB012KLVTB013 KLVTB014 KLVTB020 KLVTB017KLVTB018 KLVTB019 KLVTB023 KLVTB026 Unable to Access Table ClusterKLVTB021 KLVTB022 KLVTB030 KLVTB027KLVTB028 KLVTB029 KLVTB035 KLVTB032KLVTB033 KLVTB034 KLVTB036 KLVTB037KLVTB038 KLVTB042 Free $TUB Integrity Check Failed KLVTB040 Klvtbmgr Logic ErrorKLVTB039 KLVTB041 Klvtbmgr Invalid Table Delete Pointer KLVTB048 Invalid Erase Request Detected KLVTB045KLVTB046 KLVTB047 KLVTB053 KLVTB049 Invalid RLB Chain DetectedKLVTB051 UNSUPPORTED/INVALID $TBHLP Request Received KLVTB052 Klvintb Rkanpar Parameters KLVTR001 Internal Trace Status KLVTI201 Invalid $STMX Request DetectedKLVTQ101 KLVTQ102 KLVTR005 KLVTR004 Internal Trace Facility DisabledDisabled KLVTR003 KLVTR025 KLVTR026 GTF Interface has not Been EnabledKLVTR022 KLVTR024 KLVTR032 END of Trace Status KLVTS001 Timer Already CancelledKLVTS011 Timer Association Vector Reuse KLVTR031 KLVVL004 Unable to Reopen Viewlog Cluster KLVVL001 Vsam Services not Available for ViewlogKLVVL002 KLVVL003 KLVVL010 KLVVL007KLVVL008 KLVVL009 KLVVL015 KLVVL012KLVVL013 Rkanparklvinvlg is Empty KLVVL014 Dsname or Ddname is Required for Viewlog KLVVP000 KLVVL017KLVVM001 KLVVM002 KLVVP018 KLVVP014KLVVP015 Maxline Parameter not in RANGE1-255 KLVVP017 KLVVP023 KLVVP019KLVVP020 KLVVP022 KLVVP032 KLVVP034KLVVP035 Interrupted KLVVP036KLVVP037 KLVVP038 KLVVP301 KLVVP201 VPO TerminatedKLVVP202 VPO Terminating KLVVP300 KLVVP308 Intervention Required Sent to Application KLVVP305 Print Request Status FlagsKLVVP306 SESS-VPRTLOGGED-ON KLVVP307 Actively Printing KLVVP314 Vrpinter Request Token Contains Invalid Characters KLVVP311 Term Request Requires a Specified VprinterKLVVP312 KLVVP313 KLVVP403 KLVVP400KLVVP401 KLVVP402 KLVVP409 Alternate Physical Printer Attempted YES/NO KLVVP406 Retry in Progress YES/NOKLVVP407 No Retry Limit Specified KLVVP408 Retries Left ## KLVVP414 Immediate Physical Release Specified YES/NO KLVVP411 Session Honors Relreq YES/NOKLVVP412 Wait for DR from Physical Printer YES/NO KLVVP413 Outbound Limit Reached YES/NO KLVVP419 KLVVP416KLVVP417 Physical Printer OWNEDYES/NO KLVVP418 Maxline ### KLVVP425 KLVVP422KLVVP423 Physical Printer is Sysout YES/NO KLVVP424 KLVVP430 Vprt and Pprt MAY not be Specified Together KLVVP427KLVVP428 Sysout Ignore EOM YES/NO KLVVP429 No Vprinters Defined KLVVS002 KLVVS003KLVVS010 KLVVS013 KLVVS011Scheduled KLVVS012 KLVVS017 WARN, ErrorKLVVS016 Increase &$CCBSP$ KLVVS021 KLVVS026KLVVS031 KLVVS050 KLVVS041KLVVS042 KLVVS043 KLVVT002 KLVVS051KLVVS052 Invalid Klvvsstm Request KLVVT001 KLVVT021 KLVVT004 Vtam Access Method Support Vector ListKLVVT005 KLVVT015 Request Retry Appl KLVVT021 Exception Response Explanation An exception response was received by CT/EngineKLVVT021 Definite Response KLVVT021 Vtam Lerad Exit KLVVT021 Physical ErrorKLVVT021 API Exit Trace Enabled KLVVT021 RPL Exit Trace Enabled KLVVT062 KLVVT031KLVVT051 KLVVT061 KLVVT104 KLVVT101KLVVT102 KLVVT103 KLVVT109 KLVVT106KLVVT107 KLVVT108 KLVVT114 KLVVT111Increase &$ARBSP$ KLVVT113 Klvinvtm Rkanpar Parameters KLVVT505 KLVVT251KLVVT501 Initialization Member Klvinvpo not Available KLVVT503 Initialization Member Klvinvpo is Empty KLVVT509 VPO Applid is not Authorized AS a Program Operator KLVVT506KLVVT507 KLVVT508 KLVVT851 KLVVT511KLVVT512 Klvinvpo Rkanpar Parameters KLVVT513 KLVVT904 CancelledKLVVT902 KLVVT903 KLXCP002 KLVVT953KLXCP001 Warn Explanation Subsys Configuration content of memberSyntax Error msg text KLXIN001 KLXIN004 TCP/IP Interface not Opened RC9999 KLXIN003 TCP/ACCESS Interface Configuration CompleteKLXIN004 TCP/ACCESS Interface Initialization Bypassed KLXIN003 TCP/IP Interface Initialized KLXIN009 Hpns Initapi Failed Rcffffffff ERRNO000003F3 KLXIN006KLXIN007 KLXIN008 Text in error Rc Hostname hostname KLXOP004KLXOP004 TCP/IP’,SUBCMD,’ Completed KLXOP005 KM2HDI00 Historical Data Interface Initialized KM2HDI80 CANSM2HD Terminated by Stop CommandKM2EXPFF Profile Export Failed KM2EXP00 Profile Export Completed Successfully KM2HDI99 Reason xxxx Session xxxxxxxx Handle KM2HDI99 CANSM2HD Failed KM2IMP00 Profile Import Completed Successfully KM2IMPFF Profile Import Failed KMC0011E Your request failed. Gets inhibited for the queue KMC0010E Your request failed. Message format not valid KMC0021E Your request failed. MQSeries object already exists KMC0025E Your request failed. MQSeries pageset full KMC0024E Your request failed. MQSeries pageset errorKMC0022E Your request failed. MQSeries object damaged KMC0023E Your request failed. MQSeries object in use KMC0029E Your request failed. MQSeries queue is full KMC0028E Your request failed. MQSeries queue deleted Converted is not valid or not supported KMC0037E Your request failed. MQSeries security error Attribute of the definition KMC0045E Your request failed. Unknown MQSeries queue name But it does not have a Usage attribute of Mqustransmission 194,304 SYSTEM.ADMIN.COMMAND.QUEUE for distributed platforms orSYSTEM.COMMAND.INPUT for MVS is large enough Is not valid KMC0097E Your request failed. MQSeries object name not valid KMC0104E Your request failed. MQSeries received data error KMC0101E Your request failed. MQSeries connection refusedKMC0103E Your request failed. MQSeries send failed To resolve the in-doubt state, or resolve the channel Channel is in doubt KMC0120E Your request failed. MQSeries channel name invalid User Response Specify a valid name for the message exit Maximum length of the name depends on the environment User Response Specify the Connection Name for the channel Channel types, but is not present NetBIOS SPXTCP Working correctly, at both ends On OS/2 Warp, Windows, and Windows NT, it is of the formMaximum length of the string is 128 characters KMC0153E Queue Manager is already a member of this cluster Queue Manager could not be deleted Queue Manager cannot be deleted by the Configuration AgentAt least at version 5.1 distributed platforms or 2.1 MVS Queue Manager cannot be deleted because it is still active KMC0166S Failure occurred in the MQSeries Dspmqfls command KMC0163E Your request to stop the Queue Manager failedKMC0164W MQSeries Queue Manager is already running Appropriate MQSeries System Administration Guide KMC0172E An error occurred processing the Setmqaut commandKMC0174E An invalid MQSeries command argument was detected Tandem NSK and AS/400, only one queue manager KMC0175S An unexpected error occurred on a Setmqaut commandSetmqaut command More information User Response Delete the defined storage class objects Command issued by the Configuration Agent failedIf the problem persists, call Candle Customer Support MVS only Communicate with the MQSeries command server MVS KMC0199E MQSeries object contains an invalid queue name @2 Can be used for naming all MQSeries objects is as follows MQSeries channel name KMC0204E Contents of the namelist are invalid User Response Correct the ’Through Queue Manager’ field Configuration SPX Maximum of 12 characters in length Names are restricted to a maximum of 8 characters in length For client connection channels to be used with OS/2 Warp Object, or the Appc side information data setType Chltype of Rcvr User Response Specify a valid harden backout property Windowsnt Represents a Windows NT application @3 @4 Queue That is defined with Usage NormalManager Name of an Initiation queue Usagexmitq Usage=Normal That references the process on the Triggers settingsHas triggering enabled Enabled KMC0257W Connected Queue Manager @1 does not exist Usagenormal Æmvs Windows NT, and DOS it also applies to OS/390 for defining Supporting SPXOnly on AIX For the Queue Manager Managers running on MVSThan or equal to zero, and less than or equal to KMC0287E Invalid maximum uncommitted messages value @2 999,999,999 Zero or greater than 999,999,999 Than or equal to zero, and less than or equal to 999,999,999 KMC0312E Invalid autostart listener value 640,000 if the queue is on any other MQSeries platformOr channel Manager. See the Maxmsgl parameter of the Alter Q KMC0317E Invalid storage class name @2 KMC0314E Invalid Queue Manager autoconnect protocol @2KMC0315E Invalid autostart channel initiator value KMC0316E Invalid autoconnect prototype resource group @2 KMC0321E Invalid authorization event KMC0320E Invalid page set id @2KMC0322E Invalid Dead Letter Queue @2 Is 1, and the maximum is Connected Queue Manager Cluster receiver channels that prevents duplicate names Clusters that the sender is associated withAs a full repository for the cluster Sender KMC0349E Invalid cluster workload exit data @2 KMC0348E Invalid cluster name @2 KMC0353E Invalid network priority @2 KMC0352E Invalid default bindKMC0350E Invalid maximum cluster workload data length @2 KMC0351E Invalid cluster namelist @2 KMC0362E Invalid full repository setting KMC0356W MQSecure command queue @1 not foundKMC0357W MQSecure problem queue @1 not found KMC0361E Invalid default protocol for managed cluster Conflicts Channels page in the cluster Queue Manager’s settingsHave any defined connections to any full repositories As 9,999 KMC0373E Invalid default priority %s MQSeries Version 2.1 for WindowsKMC0372E Invalid backout threshold %s KMC0376E Invalid queue depth threshold %s KMC0377E Invalid service interval %sKMC0374E Invalid channel name %s KMC0375E Invalid maximum message length %s Names are restricted to a maximum of 8 characters in length KMC0382E Invalid configured system name %sKMC0380E Invalid retention interval %s KMC0381E Invalid storage class name %s That can be used for naming prototypes is as follows KMC0385E Invalid symbolic parameter listKMC0383E Invalid Queue Manager alias name %s KMC0384E Invalid prototype name %s KMC0389E Invalid maximum uncommitted messages %s KMC0386E Invalid Queue Manager name %sKMC0387E Invalid trigger interval %s KMC0388E Invalid maximum open handles %s KMC0392E Invalid namelist KMC0391E Invalid namelist name %s KMC0396E Invalid trigger depth %s KMC0393E Invalid process name %sKMC0394E Invalid batch size %s KMC0395E Invalid sequence number wrap %s User Response Specify a valid name for the send exit To a maximum of 8 characters in length KMC0412E Authorization events not allowed on this platformEvents cannot be enabled for Queue Managers running on MVS Maximum of 8 characters in length KMC0419E Invalid primary log quantity %s KMC0415E Mcatypethread not allowed on this platformKMC0416E Convertyes not allowed on this platform KMC0418E Triggers not allowed for this version of MQSeries KM2EXPFF-KMCRCA002I KMC0430E Invalid network priority %s KMC0431E Indextype %s invalid for this version of MQSeriesManagers running on MVS Want to also disable connection authentication Keyposition service for the Oamdb fileService for the Oamdb file Period . Forward slash / Underscore Percent sign % KMC0447E Invalid application type %s KMC0451E Invalid autostart trigger monitor valueKMC0452E Invalid Qsgdisp value Order for you to specify a value other than Queue Manager KMC0454E Invalid Clusdisp valueKMC0456E Invalid Cfstruct value @2 Shared queue Is 12 charactersList Entry Started System Action None User Response Candle WebSphere MQ Configuration Agent Starting UpBe interpreted KMCRCA002I KMQxx001E Parameter Error on Domain CALL. the Gate Being CalledWAS call. the Parameter in Error WAS System Action The error is propagated to the calling module User’s Guide for MQSeries KMQCI109E KMQCI107E Invalid Minor CommandKMQCI110E Command not Supported KMQCI108E KMQCI118E List Operand Missing KMQCI116I Validate Command Completed SuccessfullyKMQCI114E Unable to Load Domain Initialization Module KMQCI117E KMQCI124W Monitoring Already Active KMQCI123I Perform Startmon Command Processed SuccessfullyKMQCI126I SET Group Command Processed Successfully KMQCI122E Sample Interval Time Missing KMQCI131E Nickname Duplicates Existing Manager KMQCI130I SET Manager Command Processed SuccessfullyKMQCI128E Name or Subsys Parameter Required KMQCI129E Inconsistent Parameters Specified for Status KMQCI137E Duplicate Channel KMQCI134E Duplicate Manager for StatusaddKMQCI135E Manager not Found KMQCI136E Channel not Found KMQCI139E Duplicate Queue KMQCI142I SET Channel Command Processed SuccessfullyKMQCI143I SET Queue Command Processed Successfully KMQCI144E Null Command Ignored KMQCI147E KMQCI149W Msgsecurity is Obsolete USE MsgaccessKMQCI146E Trace Head Node Initialization FAILED. RC=rc RSN=rs KMQCI153W KMQCI151I SET Rmanager Command Processed SuccessfullyKMQCI150E Rmanager Name Cannot be Generic KMQCI152E Both Mgrname and Rmgrname Cannot be Specified RETAINHISThistoricalaggregationvalue REMOTEQremotequeuename AGGRHISTaggregationsamples MQ Manager managername in SETmanagernamemask is MSGACCESSparm ICYCLEintervalcycle HLQhighlevelqualifier KMQCI312I KMQCI309IKMQCI310I KMQCI311I KMQCI316I KMQCI317WKMQCI318W MGRNAMEqueuemanagernamemask STATISTICSlevel Eventqueuein or eventqueueout QmgrqQueuemanagereventqueue Perfmq performanceeventqueue Channelq channeleventqueue QMGRmgrname2 KMQDU102I KMQCT129IKMQCT130I KMQDI101E KMQME102F Unable to Load Message Table Kmqamemt KMQIT103EKMQIT104I Omegamon for Websphere MQ Termination Started KMQIT105I Omegamon for Websphere MQ Termination Complete Data Space Storage KMQMH102EKMQMH103E KMQMH104E KMQMI104I KMQMI101EKMQMI102E KMQMI103E KMQMI110E KMQMI108I Channel and Queue Masks Reset by ServerKMQMI107I KMQMI109E KMQMI115E KMQMI112E Unable to Allocate Remote QueueKMQMI113E KMQMI114I KMQMI118I KMQMI116E MQ Manager Command Server not RespondingKMQMI119I Error Validating REPLY-TO Queue Manager KMQMI117I KMQMI125I KMQMI123E Correct Password has not Been ProvidedKMQMI122I KMQMI124E KMQMI133E KMQMI130EKMQMI131E KMQMI132E KMQMI141E KMQMI138EKMQMI139I Perform Startup is not Supported KMQMI140I Perform Shutdown is not Supported Queue Ignored KMQMI146EKMQMI147E KMQMI148E KMQMI155E KMQMI153EKMQMI154E EXIST. SET Channel Ignored KMQMI160E KMQMI158EIgnored KMQMI159E CCC for MQSeries to start monitoring There is no SET Manager command in the command fileMonitor a non-default queue manager User Response Add a Perform Startmon command to the command KMQMI172I KMQMI169E Environment Error Unable to Create ThreadKMQMI170E KMQMI171I KMQMI174I KMQMI175E Abend in Processevent InterceptedKMQMI178E KMQMI180E KMQMI181EKMQMI184E KMQMI194E KMQMI185ELost KMQMI193E KMQMI198I KMQMI197I Mqseries Manager Command Server is AvailableKMQMI195E KMQMI196I KMQMI204W KMQMI201W Failed to Notify Offline StatusKMQMI202I KMQMI203W Group Must Specify Single Queue Name KMQMI208I Error LOG Monitoring Feature is Turned OFFKMQMI207W KMQMI209E Candle Products Messages Manual KLVHS-KONCT BAD Return Code from SERVER. RC=rc Error Installing SMF HOOK. RC=rc REASON=rsKMQMQ104E KMQMQ105E KMQMQ109I KMQMQ106EKMQMQ107E KMQMQ108E KMQMQ116E KMQMQ113EKMQMQ114I KMQMQ115E KMQMQ120E KMQMQ118E Unable to Obtain Common Storage for SRB DriverKMQMQ119I Termination KMQMQ142E KMQMQ124IKMQMQ140W KMQMQ141E OPENINPUTCOUNT=X KMQMQ143EKMQMQ150W Open for Input by Another Application KMQMQ206E KMQMQ203EKMQMQ204I Completed Result in Incomplete Application Queue Statistics KMQMQ210EKMQMQ211E KMQMQ212W KMQMQ220E KMQMQ217EKMQMQ218E KMQMQ219E KMQMQ225I KMQMQ224E MQ Commands Cannot be Executed for Remote QmgrsKMQMQ223W Storage in Order to Maintain System Integrity Information Cannot be Collected KMQMQ229EKMQMQ232W KMQMQ233W SRBsrbname ABENDabendcode EPAentrypoint ADDRaddress KMQMQ245I KMQMQ242I QSG Monitor Disabled DUE to Zero QsgchkintervalKMQMQ243I KMQMQ244I KMQMQ404E aaaaaaaa No transaction ID specified for Kmqamqci KMQMQ401E aaaaaaaa Cics release must be at leastKMQMQ402E aaaaaaaa Unknown input method KMQMQ403E aaaaaaaa No valid action specified KMQMQ408W aaaaaaaa CCC for MQSeries already active in Cics KMQRM104E KMQMQ413IKMQMQ414W KMQPD101E KMQTR106E KMQTR103E BAD Return Code from NAME/TOKEN ServicesKMQTR104I KMQTR105E KMQTR115E Trace Buffer could not be Written KMQTR112IKMQTR113I KMQTR114I KMQVS104E KMQVS101EKMQVS102E KMQVS103E KMQW001I MSG PUT on Xmit Q Successful KMQW008E Not Allowed by MsgaccessKMQW009E Agent Timeout Occurred KMQW000W KMQW017E Command Failed KMQW010E Not Allowed by Command OptionKMQW013I Command Accepted by MVS KMQW016E Syntax Error KMVCCC002E Invalid Status Item Name in Getattribute Request KMQW018E Not Allowed by SecurityKMQW019E Not Supported by Platform KMVCCC001E Unable to Locate Kmvccc Global Area KMVCCC006E Enterprise Object is not Valid KMVCCC008E Internal Thread Dispatch ErrorKMVCCC004E KMVCCC005E Enterprise Object not Found KMVCCC012I EIB Change Thread Shutting Down KMVCCC010E Unable to Initialize Kmvccc Service QueueKMVCCC013I Kmvccc Service Thread Shutting Down KMVCCC011E Unable to Initialize SDM Interface KMVCCC019E Unable to Attach EIB Change Thread KMVCCC016E Unable to Initialize Situation Status ThreadKMVCCC017E Unable to Attach Situation Status Thread KMVCCC018E Unable to Initialize EIB Change Thread KMVCCC026E EnabledKMVCCC024E KMVCCC025E KMVCCC033E KMVCCC036E Unable to Attach SDM Service ThreadKMVCCC031I Kmvccc Support Initialization is Complete KMVCCC032I Kmvccc Shutdown Complete KMVCCC041E KMVCCC038EKMVCCC039E KMVCCC040E Request, requestcode KMVCCC054E Abend Detected in Thread Routine KMVCCC051EKMVCCC052E KMVCCC053E No Children Found for the Enterprise KMVCCC100E Unable to Open Ddname Rkandatv Opendir KMVCCC058EKMVCCC059W Attribute Name Translation Cannot be Performed KMVCCC060E KMVCCC106I KMVCCC103IKMVCCC104I KMVCCC105W KMVCCC111E Unable to Allocate Attribute Entry KMVCCC108IKMVCCC109W KMVCCC110I KMVCCC121E KMVCCC118EKMVCCC119E KMVCCC120W KMVCCC128E Unable to Allocate Node List KMVCCC127E Unable to Allocate Command Node EntryKMVCCC125E Unable to Allocate Node Status KMVCCC126E Unable to Allocate Attribute Enumeration KMVCCC134E KMVCCC131EKMVCCC132E KMVCCC133E MODULEerrormodule RCreturncode SCsensecode MODULEerrormodule RCreturncode User Response Check the Omegamon II for Vtam Configuration Failed MODULEerrormodule RCreturncode RCreturncode SCsensecodeSCsensecode Trace Cleanup Detected AN Abend Condition Additional Error Encountered During Trace CleanupUnable to Freemain Userwork During Session Termination KN3AF047 User Session Terminated RCreturncode SCsensecode Error Encountered Removing Trace Facility DuringSession Termination MODULEerrormodule RCreturncode KN3AF046 KN3AF054 Error When Reading membername MODULEerrormodule KN3AF052 Unable to Access Rkanpar MODULEerrormodule KN3AF057 Control Record GET Failed for DDNAMEddname KN3AF056 Allocating Dataset dsname KN3AF060 Vsam Logging Disabled MODULEerrormodule Reason KN3AF114 KN3AF110 Dialogfunction Unable to Obtain PassedKN3AF111 Dialogfunction NON-ZERO Return Code from NDM Call KN3AF112 KN3AFNM1 Unable to Buildlocatemodify Npbnsb for NDM Control Module KN3AFNSB Load FAILED. NCP StatisticsData not Available From Resource Topology Each ACT Cycle IntervalManager NDM task System Action NCP statistics information is not available NCP statistics data from the NCP data manager NDM NCP Statistics Data Collection DisabledMessage Type Internal or user error Code NCP Topology Genlevel Mismatch for GENDATEgenerationdate GENTIMEgenerationtime FailedRequest Failed for RESOURCEresourcename NPALUnpaluname GENDATEgenerationdate GENTIMEgenerationtime KN3AF136 KN3AXNPB Addnpb Function Failed RCreturncode KN3AF134NCP Topology not CREATED. will Retry Next ACT Cycle Interval NDM Task has Recycled Since Last INTERVAL. Resource NDM ACT Resource Cleanup in ProgressNDM ACT Resource Cleanup Complete Cleanup Requested KN3AFNMI NCP Data Manager Task not Installed KN3AF146KN3AF147 SMF Response Time Recording for NCP Resources is Inactive Message Type KN3AF149KN3AF150 KN3AF151 Topology Update Functions Initialization Failed NPALUnpaluname Failed RCreturncodeREASONreasoncode KN3AF161 MODULEmodule NON-ZERO Return Code from TCP/IP Call KN3AF157Topology Upate Functions Module KN3AFNUT Load Failed NCP Statistics Data not Available Rregisternumber Rregisternumber registervalue PSW=programstatusword, ROUTINE=programname INFOinformationcode TCP/IP Collector MIB Browser Memory Allocation Failed Initialization Complete TCP/IP Service Thread MIB Browser XmcsSnmp Manager has Terminated Snmp Manager Request Timed OUT Reason reasoncode TCP/IP Service Thread MIB Browser Xmcs AbendedTCP/IP Service Thread MIB Browser Xmcs is Terminating TCP/IP Service Thread MIB Browser Xmcs Completed TCP/IP functionname FAILED. ERRNO=errorcode KN3CT201 KN3CT201 module Unable to Load Module module KN3CT125KN3CT131 MIB Browser Initialization Failed RCretcode KN3CT132 MIB Browser is not Active RC=retcode MODULEmodule KN3CT205 KN3AITXB Required Parameter not Supplied for KN3CT302 KN3AITDE Required SUB-ELEMENT Parameter KN3CT208 KN3AITXB Ezasmi Gethostname FailureKN3CT209 KN3AITXB Invalid Return Code from KN3APTXE KN3APTXE Locate Requires String Vtam Command ErrorFind Requires String Character String not Found Must be Numeric Invalid SelectionSampling Interval WAS TOO LONG, TRY Again Selection not Available User Commands UpdatedCollection Interval Timeout Data Reinitialized Type a / Next to the Desired Selections Variable Named varname Contains contentsofvarname Dialog Error Invalid CommandRequest Successful Field is Required Threshold Criteria UpdatedSelect the Actions PULL-DOWN Menu Resources Added Invalid Numeric Range Global Options UpdatedThreshold Update Failed Global Options Update Failed Must be in the Range of 15-360 Minutes ETE Interface DisabledOperand for the Autorefresh Command Must be on OFF, or a Numeric Value from 10-3600 Seconds SAS Clist Dataset Name Specified Cannot be Located SAS Clist WAS not Entered in the Correct FormatPlease USE the Following Format CANDLE.ON.V500.SASCNTLKN3CLST6 Monitoring Thresholds Deleted Monitoring StartedMonitoring Stopped Monitoring Thresholds Changed Autorefresh Options Updated Monitor Options Update ErrorMonitor Options Updated Terminal Options Updated Response Time Must be Greater then Previous Range SMF Definition AddedSMF Definition Changed SMF Definition Deleted User Authority Deleted AT Least 1 Administrator is RequiredNot Allowed to Delete the only Administrator User Authority Changed Trace Already Active or Completed Navigation not AllowedNEW Rachsrt Parameter is not Prime Light PEN is not Supported No Screen Prints Were Requested GET Failed for Default Printer OptionsTrace is not Active Close Failed for Sysout Dataset PUT Failed for Sysout Dataset Allocate Failed for Sysout DatasetADD Failed for Screen Print LOG Open Failed for Sysout Dataset LU not Found Printer Options UpdatedERROR, see Viewlog Trace ABENDED, Data Still Good ETE Started Task is not Available Following Error Occurred When Omegamon AttemptedTo Access the Specified SAS Print Options LIBRARY. Return TREND/EXCEPTION LOG File Access Error Requested PIU WAS not Found Options Pulldown Panel are not VALID. Please UpdateHistorical Graph Options Before Attempting to Access AN Unexpected Error Occurred Critical Must be Greater than Warning Enter YES or noEnter C or W Enter a Numeric Value or Leave Blank Categories Selection is only Valid for the IO00 Buffer PoolDomain View Command Invalid When Displaying Directory Alphanumeric Field RequiredEnter N or S Control Block is no Longer Valid Control Block Cannot be Accessed for ONEAN Attempt to Access the Address Space Failed Following Reasons Found in the Crpl Tuning Statistics are not ActiveUnable to Find the Actual RPL. the Crpl is Displayed INSTEAD. Most of the Data from the Original RPL can be Resource not Found Trace not StartedNot Valid for GROUPS. USE List L and Select AN Individual Resource Vtam Replaceable Constants Module Istracon is not Specify Either Resource Name or Network AddressRPL Data is only Available for Applid Resources Resource has no Sessions Enter M or C Storage Required for Modelling not AVAILABLE. EnsureThat LIMIT23,X is Coded for the Startup Parameter Enter N, L, P, or U Select only ONE Resource with Copy Enter P or UResources Must be the Same Type Select only ONE Resource with Mark Resource is not Active to Vtam and Cannot be Monitored Resource has no Subordinate ResourcesResource has Already Been Started Resource has NPACOLL=NO and Cannot be Monitored No Exceptions are Generated for this Field Monitor Options will be Updated with the Current SiteDefaults Resource Already Using Site Default Options Resource Must be Stopped Before Monitoring Options can Resource Must be AN LU or TerminalNo Subordinate Resources are Being Monitored Resources Already Added Resource can be Stopped No Update AUTHORIZATION, View onlyGroup Description Already Exists Subordinate Resources Must be Stopped Before this Enter M or H Resources has Been DisabledNCP Trend Recording Disabled AT Startup NCP Topology Update Interval Must be Greater than Address Space Name Already Exists Update SuccessfulInvalid Scroll Amount No LUS Associated with Resource Connection Number Required for Drop Update ErrorMust be Alphabetic Buffer Pool Data not Available OID Number is Unknown TCP/IP Command ErrorAT Least ONE Entry is Required OID Name is Unknown HI Priority Connection not Defined KN3FCCMD Command Processing Complete KN3AYFCV not AVAILABLE. Install Option Required Fpon Component Functions Installation CompleteFpon Component Functions Installation Failed Sevt Vtam Environment Installation Failed Fpct Component Functions Installation CompleteFpct Component Functions Installation Failed Sevt Vtam Environment Installation Complete Semv Vtam Environment Status Failed ROUTINE=KN3AHEM3 Semv MVS Environment Installation CompleteSemv MVS Environment Installation Failed Sevt Vtam Environment Status Failed ROUTINE=KN3AHEV3 REASON=reasoncode RETURN=returncode ROUTINE=KN3AHNT1 REASON=reasoncode RETURN=returncode Message Type User errorKN3FC055 Ndmt NCP Data Manager Task Start Failed Status text Tcpc TCP/IP Collector Installation Failed Dbug Extended Diagnostics Mode Status Failed Tcpc TCP/IP Collector Stop Failed ROUTINE=KN3ACTC2 Tcpc TCP/IP Collector Start Failed ROUTINE=KN3ACTC1 KN3FC096 Tcpc Status Command Failed ROUTINE=KN3ACTC3 Initializing FTP Reporting Thread FTP Initialization CompleteFTP Initialization Failed to Load KN3INFT2 Bytes CSA Error Freeing CSAOverride Value Accepted CSA Monitor Ended CSA Freed Error Loading LlllllIncrease Bufmax AND/OR Reduce Collectinterval No Jobname Found Recovering from Already Added Exit Error Freeing CSAError RE-LOADING Llllll Error Obtaining CSA Deleting SMF Exits Error Freeing CSA Copy of RecordAdding SMF Exits Added SMF Exits Omegamon FTP Agent Resource Manager Entered Initializing Cleanup ThreadTable Cleanup Running No Unprocessed SMF Records IRA Subnode Registration Thread is Active Error no Eyecatcher in CSAResource Manager Started Invalid ROW Pointer Tcpncpvtam Monitor Subnode Deregistered for Tcpncpvtam Monitor Subnode Registered for Originnode KN3IR908 IRASubnodeRegister error RC=xx Node=ccccccccccccc KN3IR904 Pthreaddetach errorKN3IR905 IRA Manager command unknown KN3IR906 IRA Manager command operand missing IRA Subnode Registration Thread is not Active IRA Subnode Registration Thread is not RespondingIRA Subnode Registration Thread Currently Active KN3IR916 $SCAN Error Parsing cccccccc ROUTINE=cccccccc R0=hhhhhhhh R1=hhhhhhhh ROUTINE=routineKN3IR919 TCP Monitor Start Failed for Originnode originnode KN3IR922 TCP Monitor Stop Failed for Originnode originnode KN3IR924 IRA Subnode Deregistration Failed ROUTINE=ccccccccKN3IR926 TCP Monitor Collection Failed MACROcccccccc macro KN3LC102 Appc Request Error appcrequest ROUTINE=routinename KN3LC101 Collector Applid applid UNAVAILABLE, NDM Task willTerminate KN3LC108 Failure to Acquire Storage for storagearea KN3LC107 SQL Request ERROR, ROUTINE=routine-nameKN3LC109 KN3AYNCE Select Count Error ROUTINE=routinename KN3LC104 Missing KN3AYLCA Work Area ROUTINE=routinename KN3LS101 KN3LC110 Appc Client Services Abend CODE=abendcode PSW=pswKN3LC111 KN3LC112 Connection Failure Acbname localid ROUTINE=routinename RETURN=returncode REASON=reasoncode RETURN=returncode REASON=reasoncode KN3LS114 Connection Failure Using Acbname applid KN3LS110 Invalid Resource Count Error ROUTINE=routinenameKN3LS111 KN3AYWKG Chain Error ROUTINE=routinename KN3LS112 Lucs Services Abend CODE=abendcode PSW=psw NCP Statistics Collector is Terminating NCP Statistics Collector Available for Requests REASON=reasoncode Npaluname KN3ND015 $PAM$PAMname Failed ROUTINE=KN3AHN04 DDNAME=KN3RRT Load Failed R15=returncode R0=returncode R1=returncode R15=registervalueResourcename NPALU=npaluname R1=returncode Ddname KN3RRT MEMBER=membername R15=registervalue R0=registervalueR1=registervalue RRTname Network Topology Error in Locate Function During Topology for DeletionDuring functioncall. Found Label NCPsourcelabel NCP Data Manager Task Available for Requests Is not SpecifiedCurrent Topology NCP will not be Monitored NCP Data Manager Task Initialization Failed NCP Data Manager Task is TerminatingPSW=programstatusword ROUTINE=routinename NCP Data Manager Task Termination Complete RETURN=returncode KN3ND108 SQL Resource Allocation Failed RETURN=returncodeSENSE=sensecode SENSE=sensecode KN3AYNRE RDS Segment Allocation Failed KN3AYNRE Header Allocation FailedKN3AYNCE Allocation Failed System Action The NCP data manager task request fails KN3ND130 KN3AGNPB Service Function ABENDED, CODE=abendcodeNCP data manager task request fails Resourcename failed Area Ndmt Service Request FailedKN3AGNPB Entered for AN Invalid Function KN3AGNPB no Hash Table Address Found in the ACT Work KN3AGFPF Floating Point Function Failed REASON=ABEND CODE=abendcodeOWNER=ownername,RETURN=hexreturncode KN3AGNTS Labeltypetab Genpunam Errors DetectedGenlunam Errors Detected Errors Detected During X.25 Resource Scanning for Appc Environment not Initialized Appc Environment Termination FailedACT Started Successfully Omegamon II for Vtam V500 Initialization Error ETE Connected SuccessfullyRCreturncode KN3PN011 KN3PN008 Logon Error Encountered for User userid FunctionKN3PN012 Table Service Error in Dialog callingdialog USERWORKuserworkareaaddress textstring V500 Product Conversion Complete KN3PN015 Engine Services Error in Dialog callingdialogKN3PN016 Error in Dialog errordialog LUluname APPLapplid KN3PN017 Vtam Level Detected Authorization FailedOmegamon II for Vtam V500 Initialization Failure APF Omegamon II for Vtam V500 Initialization Failure Invalid Security Enabled Omegamon II for Vtam V500 Initialization FailureNCP Global Options Table Conversion Complete TRIGGERSDMhotkey Security EnabledSESSIONSDMsessionname SDMAPPLSDMapplid SYSTERMSDMluname REFRESHSDMrefreshinterval Severity System Programmer ResponseNo KN3SD003Enhanced Original Zoom Activated KO41031 Situation &1 is true KO41035 Object &1 changed by &2 KO41039 Error in request &1. Status &2. Reason &3KO41034 Monitoring for situation &1 ended Severity KO41042 is written to the log User Response Change the compare value & 2 to a numeric Be numeric Another KO48010 Policy &1 started Before it finishes runningKO48071 Policy &1 activated KO48073 Policy &2, activity &1 has started KO48078 Policy &1 updated by &2KO48079 Activity &1 in policy &2 updated by &3 KO48080 Ranking group &1 updated by &2 User KO48093 Changing time slice for job &1 job number &2 to &3 KO48090 Policy &1 has deactivated. Restart limit exceededKO48091 Changing priority for job &1 job number &2 to &3 KO48092 Changing job queue for job &1 job number &2 to &3 KO48119 Releasing job &1 job number &2 KO48106 Ending job &1 job number &2KO48110 Policy &2, activity &3 Evaluating situation &1 KO48112 Holding job &1 job number &2 KO48148 Policy &2, activity &3 Waiting for &1 seconds KO48150 Policy &2, activity &3 Running policy &1KO48152 Situation &1 could not find message queue &2 KO49016 Situation &1 imbedded in policy &2. Not deleted KO49017 Policy &1 imbedded in policy &2. Not deletedKO49019 Candle Management Server CMS log not displayed Severity System Programmer ResponseNo Candle Management Server CMS again Be used Severity System Programmer ResponseImmediate KO4SRV004 KO4SRV001KO4SRV002 KO4SRV003 KO4SRV008 KO4SRV005KO4SRV006 KO4SRV007 KO4SRV021 KO4SRV018KO4SRV019 KO4SRV020 KO4SRV033 KO4SRV030KO4SRV031 KO4SRV032 KO4SRV042 KO4SRV039KO4SRV040 KO4SRV041 KO4SRV052 KO4SRV049KO4SRV050 KO4SRV051 KO4SRV057 KO4SRV054KO4SRV055 KO4SRV056 KO4SRV064 KO4SRV061KO4SRV062 KO4SRV063 KO4SRV071 KO4SRV068KO4SRV069 KO4SRV070 KO4SRV077 KO4SRV074KO4SRV075 KO4SRV076 KO4SRV083 KO4SRV080KO4SRV081 KO4SRV082 KO4SRV092 KO4SRV089KO4SRV090 KO4SRV091 KO4SRV099 KO4SRV096KO4SRV097 KO4SRV098 KO4SRV106 KO4SRV103KO4SRV104 KO4SRV105 KOCJO004 Interface Suspend Requested KOCJO001 Initialize Completed NormallyKOCJO002 Interface Shutdown Requested KOCJO003 Interface Shutdown Completed KOCJO010 Failure in Cics Inquire KOCJO012 Journal Number ErrorKOCJO008 Unable to Determine Start Type KOCJO009 KOCPLT00 not LOCATED. Check Linkedit KOCJO014 Suspend Transaction Inactive KOCJO016 Journal Open ErrorKOCJO018 Exit Enable Error KOCJO019 Exit Extract Error KOCJO022 Exit Stop Failure KOCJO024 Exit Disable FailureKOCJO020 Getmain Failure KOCJO021 Exit Start Failure KOCJO029 Resume is Already in Process KOCJO026 Transaction Start FailureKOCJO027 Interface Inactive KOCJO028 Initialize is Already in Process KOCJO032 Unknown Function in Process KOCJO033 Error Occurred During Cleanup DisableKOCJO034 Error Occurred During Cleanup Freemain KOCJO037 Error Received During Wait Processing KOCJO041 Rtype not Present in Dictionary KOCJO038 Error Received During Freemain ProcessingKOCJO039 Journal Write Failure KOCJO040 Interface Transaction has Abended KOCJO044 Netname not Present in Dictionary KOCJO045 Uowid not Present in DictionaryKOCJO046 Omegbsc not Present in Dictionary Candle Products Messages Manual KLVHS-KONCT KOGCM004 KOGCM001KOGCM002 KOGCM003 KOGDF007 KOGCM005KOGDF005 KOGDF006 KOGEC001 No Session Specified Sessid omittedKOGEC002 Specified Session not Defined to Povi KOGEC006 KOGEC003KOGEC004 KOGEC005 KOGEC011 KOGEC008KOGEC009 KOGEC010 KOGEC016 KOGEC013KOGEC014 KOGEC015 KOGEV001 KOGEC018KOGER001 Invalid Selection Code KOGER002 KOGIN001 KOGEV004KOGEV005 KOGEX001 KOGMM001 KOGLM003KOGLM004 KOGLM005 KOGOP004 KOGOP000KOGOP001 KOGOP002 KOGRT009 KOGOP005KOGOP006 KOGRT006 KOGRU005 KOGRU002KOGRU003 KOGRU004 KOGRU014 KOGRU017 Testing PATH, PF12 PressedKOGRU012 KOGRU013 KOGST001 KOGRU018KOGRU019 KOGRU020 KOGTB004 KOGTB001KOGTB002 KOGTB003 KOGUT002 KOGTB007KOGTB009 KOGUT001 KOGUT009 KOGUT005KOGUT006 KOGUT007 KOGVL03S KOGUT012KOGVL00I KOGVL02I KOGVL08E KOGVL05S Unable to Determine SLU ApplidKOGVL06S Unable to Locate VU Server IPC Queue KOGVL07S KOGVL13E KOGVL10IKOGVL11S KOGVL12S KOGVL20I KOGVL14I Outbound LU0 PacketKOGVL15I KOGVL16E KOGVL24I KOGVL21IKOGVL22I KOGVL23I KOGVL29E KOGVL25EKOGVL26E KOGVL27E BAD pdutype CONTINUATION. SEQNO=seqno EXPECTED=eseqno KOGVL30EUnable to Terminate lrtype STATUS=status KOGVL31E KOGVL36I KOGVL33IKOGVL34I KOGVL35I KOGVL99I KOGVL38EKOGVL40E KOGVL41E KOGVS004 KOGVS001KOGVS002 KOGVS003 KOGVS04I KOGVS01EKOGVS02E KOGVS03E KOGVS11I VU Server Shutdown in Progress KOGVS05EKOGVS06E KOGVS10E KOGVS99I VU Server is Terminating KOGVS13IKOGVS20E KOGVS90S VU Server Initialization Failed KOGVT14I Vupl TYPE=vupltype ContentsKOGVT10E Unable to Locate Parameters LRN=lrn KOGVT20I KOGVT17WKOGVT18I KOGVT19I KOGVT25I KOGVT22EKOGVT23W KOGVT24E KOGVT29E KOGVT26IKOGVT27I KOGVT28E KOGVT34E KOGVT31IKOGVT32E KOGVT33E KOGVT37E KOGVT34IKOGVT35E KOGVT36E KONAF001 KOGVT38EKOGVT40I KOGVT99I VU Thread is Terminating KONAF006 Member Koncnmap Contains Invalid ACB Name KONAF003 Background ETE Collector Terminated with ErrorKONAF004 ACT Terminated Abnormally Manager NDM functions module failed MODULEerrormodule RCreturncode KONAF021 KONAF031KONAF041 KONAF044 Error Encountered During Trace Cleanup Capture Reader Codes MODULEerrormodule RCreturncodeKONAF045 KONAF050 KONAF046 Error Encountered Removing Trace Facility DuringKONAF047 KONAF048 KONAF054 KONAF051KONAF052 KONAF053 KONAF059 KONAF056KONAF057 KONAF058 KONAF060 KONAF061KONAF062 KONAF113 KONAF110KONAF111 KONAF112 KONAF117 KONAF115KONAFNM1 Unable to Locate Site Monitor Table tablename KONAF116 KONAFNM1 Unable to Buildlocatemodify Npbnsb for KONAF123 KONAF120KONAF121 KONAF122 KONAF128 KONAF127 NCP Statistics Data Collection DisabledKONAF125 KONAF126 KONAF133 NCP Topology Genlevel Mismatch for KONAF130KONAF131 KONAF132 KONAF137 KONAF135KONAF136 Konaxnpb Addnpb Function Failed RCreturncode Konaxnpb Gethash Function Failed RCreturncode KONAF140 NDM ACT Resource Cleanup in ProgressKONAF141 NDM ACT Resource Cleanup Complete KONAF138 KONAF147 KONAF146 Konafnmi NCP Data Manager Task not InstalledKONAF144 KONAF145 KONAF150 KONAF148KONAF149 From the Konaxcrb macro KONAF156 KONAF154 Topology Update Functions Initialization FailedKONAF153 KONAF155 KONAF161 KONAF158KONAF159 KONAF160 KONCT004 TCP/IP Statistics Collector is Terminating KONCT001 $INIT Failed for Main Thread LRNKONCT002 KONCT003 KONCT013 KONCT010KONCT011 KONCT012 KONCT052 KONCT015KONCT050 Snmp Manager has Terminated KONCT051 KONCT110 KONCT102 TCP/IP Service Thread MIB Browser Xmcs AbendedSupport Services. See message KONCT103 which follows KONCT103 KONCT122 KONCT112 $GMEM Failed for Command Output RecordKONCT113 $GMEM Failed for Command Param Structure KONCT121 TCP/IP Address Space Collector Failed KONCT201 KONCT125KONCT131 KONCT132 KONCT206 KONCT202KONCT203 KONCT204 KONCT301 KONCT208Konaptxe KONCT210 KONCT303 Konaitdd Invalid Element Parameter parm KONCT303 Candle Products Messages Manual KLVHS-KONCT

Candle GC32-9172-00 manual KLVRT020, KLVRT021, KLVRT022 RTM NPM Vector Error

Models: GC32-9172-00

KLVRT020

EVENT=X’xx’

KLVRT021

RTM NPM request FAILED: RC=nn REASON=nnn

KLVRT022

RTM NPM VECTOR ERROR

KLVRT023

RTM NPM NSI ADDRESS SPACE NOT RUNNING

GC32-9172-00 specifications