Candle GC32-9172-00 manual KLVPM011, KLVPM012 PSM Private Extension not Initialized, KLVPM021

KLVPM011	TERMINAL luname LOGGED OFF - ERPCOUNT EXCEEDED
	Explanation: A terminal, "luname", has caused more simultaneous error
	recovery operations than the ERPCOUNT limit set by the PSM command.
	"luname" is logged off.
	System Action:	None.
	User Response:	None.
	Message Type:	INFO.
KLVPM012	PSM PRIVATE EXTENSION NOT INITIALIZED
	Explanation: The PSM command was issued and the PSM private extension
	was not available.
	System Action: The PSM command is not executed.
	User Response: Wait until CT/Engine has completed initialization, then reissue
	the command.
	Message Type:	INFO.
KLVPM013	PSM ERP INFO BLOCK POINTER IS ZERO
	Explanation: The PSM command was issued and the PSM ERP block was not
	available.
	System Action: The PSM command is not executed.
	User Response: Wait until CT/Engine has completed initialization, then reissue
	the command.
	Message Type:	INFO.
KLVPM021	INPUT PROCESSING EXCEPTION: RC=rc,lu_name,
	modname,attention_code,fdbk, error_data,datastream
	Explanation: An input message from the physical terminal has caused an
	exception condition in PSM where
	rc	Identifies the reason for the error. See the reason code analysis
		table below for more information.
	lu_name	Physical terminal LU name.
	modname	Module identifier.
	attention_code	Pending AID.
	fdbk	Feedback information internal to CT/Engine.
	error_data	Two bytes of error data. See the reason code analysis table below
		for a description of the valid data.
	datastream	Up to first ten bytes of the input message causing the exception.

The following table lists possible reason codes for the input exception with associated system action codes and user response codes. After locating the reason code, refer to the appropriate system action and user response following this table.

KLVHS001–KLVSC009 67