Candle GC32-9172-00 manual KONAF060, KONAF061, KONAF062

KONAF060	VSAM LOGGING DISABLED — MODULE(error_module) REASON
	(cccccccc)
	Explanation: VSAM logging is disabled and the reason for it is cccccccc. This
	message is usually accompanied by other messages in RKLVLOG. Following is the
	list of possible reasons:.
	LOAD	Some modules are missing.
	ALLOC	Error during VSAM dataset allocation.
	INIT	Error during initial load to VSAM cluster.
	PUT	Error during VSAM PUT. Probable DASD problem.
	INTERNAL	Internal error.
	ABEND	Abend occurred during logging to VSAM cluster.
	VSAMSERV Internal VSAM services are unavailable.
	System Action: VSAM logging is disabled.
	User Response: Check for accompanying messages for any of the following
	reasons:.
	LOAD	Check installation.
	ALLOC	Check installation.
	PUT, INIT	Check for DASD problem.
	INTERNAL, Contact Candle Support Services.
	ABEND
	VSAMSERV Check to make sure that termination was requested. If it was not,
		gather the preceding 30 minutes of the RKLVLOG and any dumps
		that were produced or taken, and contact Candle Support
		Services.
	Message Type:		Warning.
KONAF061	ERROR WHEN READING FROM DSN(dsname) — MODULE(error_module)
	Explanation: An error occurred when reading from a VSAM cluster named
	dsname. This indicates a DASD problem.
	System Action:		None.
	User Response: Check for any accompanying messages in RKLVLOG and
	respond according to those messages.
	Message Type:		Warning.
KONAF062	PUT FAILED FOR REASON OTHER THAN EOF FOR DSN(dsname) —
	MODULE(error_module) FDBWD(fdbwd)
	Explanation: OMEGAMON II for VTAM encountered an error while writing an
	exception or interval record to the cluster dsname.
	System Action:		None.
	User Response: Check for any accompanying messages in RKLVLOG and
	respond according to those messages.
	Message Type:		Warning.

KOGCM001–KONCT303 501