Adjusting the Print Density

You can adjust the density scale if differences between the image on the original and the print occur.

NOTE

The default setting is in the middle '5', on a scale of 1 to 9.

Additional

1 Press [Additional Functions] [

] or [

] until

Functions

 

 

 

OK

<COMMON SETTINGS> appears press [OK].

If necessary, see the screen shots in steps 1 and 2 of "Initial Function at Power ON," on p. 5-15.

The <COMMON SETTINGS> menu appears.

5

Customizing Settings

2 Press [ ] or [] until <PRINTER DENSITY> appears press [OK].

OK

COMMON SETTINGS

 

PRINTER DENSITY

 

 

 

 

5.PRINTER DENSITY

 

-LT

 

 

 

 

 

 

 

 

 

DK+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The <PRINTER DENSITY> menu appears.

3 Press [ ] or [] to adjust the density from light (-LT) to dark (DK+) press [OK].

OK

PRINTER DENSITY

 

 

 

 

COMMON SETTINGS

 

-LT

 

 

 

 

 

 

 

 

 

DK+

 

6.AUTO DRAWER SELCT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Printer Density is adjusted.

Stop

4 Press [Stop] to return to the Standby display.

 

5-22Specifying Common Settings