Fuser Roller Cleaning

If black streaks appear with printing, the fuser roller in the main unit may be dirty. Should this occur, use the Roller Cleaning function to clean the roller. The roller should also be cleaned each time the toner cartridge is replaced. Before cleaning the roller, print out the cleaning pattern. Then load the sheet into the stack bypass and start cleaning.

IMPORTANT

The cleaning pattern can only be printed on LTR paper.

NOTE

Cleaning the roller takes approximately 100 seconds.

Additional

1 Press [Additional Functions] [

 

] or [

] until

Functions

 

OK

<ADJUST./CLEANING> appears press [OK].

If necessary, see the screen shots in steps 1 and 2 of "Automatic Feeder Cleaning," on p. 7-30.

The <ADJUST./CLEANING> menu appears.

2 Press [ ] or [] until <FIX. UNIT CLEANING> appears press [OK].

OK

 

ADJUST./CLEANING

 

 

 

FIX.UNIT CLEANING

 

 

 

 

 

 

 

 

 

3.FIX.UNIT CLEANING

 

 

1.START CLEANING

 

 

The <FIX. UNIT CLEANING> menu appears.

 

 

 

3 Press [

 

] or [

] until <CLEAN PAPER PRT> appears

 

 

 

 

 

 

 

press [OK].

 

 

 

 

 

OK

 

 

 

 

 

 

 

 

 

FIX.UNIT CLEANING

 

 

CLEAN PAPER PRT

 

 

 

 

 

 

 

 

2.CLEAN PAPER PRT

 

 

PLEASE WAIT

The cleaning paper is printed. You will use this paper as the cleaning paper.

7

Routine Maintenance

Routine Cleaning

7-33